Used Transducer for sale (134)

Condition: excellent (used), Year of construction: 2012, Autoclave Systec VX-100. The device has only undergone testing phases. Fully automatic, microprocessor-controlled system covering 12 programs: 1-3 Solids 4-5 Waste destruction bags 6-7 Liquid waste 8-11 Liquid media 12 Cleaning • Integrated separate steam generator (no heating elements in the sterilization chamber) • Innovative safety ring closure system with lip seal Nwodpfxox R Emke Ac Aed • Steam temperature and pressure up to 140°C / 4 bar absolute pressure, extendable to 150°C / 5 bar absolute pressure • Thermal lock: door locking system controlled by pressure and media temperature according to pressure vessel regulations • Flexible PT-100 temperature sensor for reference vessel • Sterilization time controlled by media temperature • Electronic pressure transducer for monitoring pressure and temperature • “Autofill” – automatic dosing of demineralized water for steam generation • Special waste destruction program with pulsed heating for better ventilation of waste bags • Timer start / programmable delayed start • Outlet steam condensation, water-cooled, thermostatically controlled • Common manifold connection for all outputs • Drain valve • Base plate for tanks, baskets, etc. • Validation port • RS 232 interface for external data transfer • Prepared for subsequent printer installation • Prepared for subsequent fast cooling installation • Prepared for subsequent vacuum system installation • Prepared for subsequent drying installation • Safety switch for low water level • Safety switch for overtemperature Options installed in the autoclave: Autoclave: VX-100 (Y-1100), ch+w, w, p, s, K, SAPL ch – cooling water cooling – ch+w vacuum – p drying – s compressor – k SAPL – system.

Condition: used, Zwick / Roell Type: LTM10 Max test frequency: 100 Hz depending on the amplitude Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test chamber height without force transducer: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partly by Zwick/Roell Accessories: screw clamps, software (TestXpert research) Connection 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Nwsdpfjv Ifgtex Ac Aed We will be happy to answer any further questions you may have over the phone.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm Nodpfsxrffaex Ac Aswd - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Nwodpfxjvx Su Ss Ac Aod Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Nwsdpfxsw Uifdj Ac Asd Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: new, Balluff BTLONLH BTL7-G110-M0200-B-S32 Micopulse displacement transducer, serial no. according to photo, unused in original packaging, 100% functional, scope of delivery according to photos Nwjdpji D T Elofx Ac Ajd

Condition: new, Balluff BTL01CM / BTL5-G11-M0200-B-S32 Micropulse displacement transducer, serial no. according to photo, unused in original packaging, 100% functional, scope of delivery according to photos Nwodpoi D T Edsfx Ac Aod

Condition: new, Balluff BTL0NLH BTL7-G110-M0200-B-S32 Micropulse displacement transducer, serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Nwedpfx Aji D T Ehec Aed

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, pressure switch, pressure transmitter -Condition: unused, original packaging -Manufacturer: Jumo control, pressure transmitter, pressure transducer, unused, original packaging -Type; 4 AD-30-020 -Inlet: 0 - 40 bar -Quantity: 1x Transmitter available -Price: per piece -Cardboard dimensions: 230/90/H60 mm Nedpfx Acsltrfms Aswd -Weight: 0.3 kg/pc.

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, pressure switch, pressure transmitter, pressure transducer -Condition: unused, original packaging -Manufacturer: Jumo control, pressure transmitter/pressure transducer, unused, original packaging -Type; Cerabar T PMC131-A11F1A1S -Quantity: 1x Transmitter available -Cardboard dimensions: 260/50/H50 mm Nodpfxsltrfuj Ac Aowd -Weight: 0.4 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Emerson Branson Ultrasonic Generator / Power Supply Manufacturer: Emerson Branson Model: DCX 4000 H01 Device type: Industrial ultrasonic generator / power supply Ultrasonic frequency: 20–24 kHz Maximum output power: 4,000 W (4 kW) Power supply: 200–240 V AC Application: Industrial ultrasonic welding (e.g. plastics, thin metals) Nwedpfx Aoya E T Ujc Aed Function: Power supply and control unit for ultrasonic transducers / sonotrodes Year of manufacture: 01/2022 Industrial-grade design, CE compliant Function tested Good condition Connection cables included

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Emerson Branson Ultrasonic Generator / Power Supply Manufacturer: Emerson Branson Model: DCX 4000 H01 Device type: Industrial ultrasonic generator / power supply Ultrasonic frequency: 20–24 kHz Maximum output power: 4,000 W (4 kW) Power supply: 200–240 V AC Application: Industrial ultrasonic welding (e.g. plastics, thin metals) Function: Power supply and control unit for ultrasonic transducers / sonotrodes Year of manufacture: 01/2022 Nedpfx Aceya Ap Hj Aowd Industrial-grade design, CE compliant Function tested Good condition Connection cables included

Condition: like new (used), Device like new Nwodpfxsx E Sm He Ac Aod The new Discovery Hybrid Rheometer (DHR) series represents the latest technological advancements from the global leader in rheology. It combines a patented advanced drag cup motor, second-generation magnetic bearing, Force Rebalance Transducer (FRT), and a new, patent-pending True Position Sensor (TPS) in a single-head hybrid rheometer. DHR offers unprecedented performance and delivers unmatched precision for direct strain control, direct stress control, and normal force measurement. DHR includes all the popular TA innovations, such as patented Smart Swap geometries and the widest range of commercially available temperature systems and Smart Swap accessories. The result is the most advanced and versatile rheometer platform imaginable. The HR-1 model is a robust, precise, and field-proven rheometer. HR-1 utilizes state-of-the-art Discovery Hybrid Rheometer technology in a platform ideal for production control, asphalt manufacturing, and a wide range of general viscosity and viscoelasticity measurements.

Condition: new, CleanMax-N Single Stage Ultrasonic Cleaners Njdpfxe Uldhs Ac Aewd The CleanMax-N range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. The CleanMax-N range are widely used for cleaning parts in the automotive, aviation, metal ware and many other industries where precise parts cleaning is essential prior to surface treatment or final assembly. The CleanMax-N range also offers a large amount of optional accessories ranging from pump filtration systems, oil separators, circulation pumps, weir systems and many more. - Tank capacities between 40 to 240 litres. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Adjustment of the cleaning time & water temperature. - Models have a ultrasonic power adjustment feature: 50%, 75%, & 100%. - High efficiency piezoelectric ultrasonic transducers with special ceramics. - Drainage valve.

Condition: like new (used), multifunctional tool for checking the safety of low voltage electrical systems SEFT950 Nwjdpfsg Tdxdsx Ac Aod Carlo Gavazzi SEFT 950, serial number: 002814/21006, instrument complete with transport bag, cables of various sizes, transducer for converting the measurements stored on the PC, equipment for measurements in medical offices, pegs for step and contact measurements or ground measurements, performs all types of electrical measurements, with an instruction manual. Measure Low-Ohm = Rpe Measure isolation = Riso Measurement of earth and ground resistivity = Re/p Measure LOOP = LOOP Measure RCD = RCD Measure voltage drop = %ΔU Measure the cyclical voltage of the phases = O/V Price Euro 800 + VAT Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Type CK-3000B Height of working table 800mm Working depth 65mm Working length 3100mm Motion controller Loran Nwedoqxtf Dopfx Ac Ajd Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), SIEMENS TELEPERM measuring transducer 315 bar Further data: see photos Nwedpfx Acexmv Ine Ajd The measuring transducer is available in multiple units.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Nwedofzk Ewopfx Ac Asd In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Nwedefz I N Tspfx Ac Aod materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Nedpfx Acjfz Aw Hs Aowd In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Nwedsfz Dtzopfx Ac Ajd In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components Nsdpfexcwx Hsx Ac Aewd A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air Nedpfjwx Iugsx Ac Aowd KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers From the beginning It was stored in warehouse in perfect conditions Nwjdpfx Ajuigpmsc Aed All other technical information and price can be sent upon request. This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.

Condition: ready for operation (used), smar LD 301 Intelligent measuring transducer, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Nedpfoxah Dbsx Ac Aowd