Used Transfer Hot Press for sale (40,047)

Condition: good (used), Year of construction: 2000, Thrust: 2000 TON. RATED CAPACIT Model: S4-2000.5000-2500-LD TYPE Year of construction: 2000 YEAR OF CONSTRUCTION Table size: 5,000 x 2,500 mm TABLE DIMENSIONS Slide adjustment: 400 mm SLIDE ADJUSTMENT Strokes per min.: 10-16 c/min. CONTINUOUS SPEED (variable) Stroke: 800 mm SLIDE STROKE Mold clearance at BDC: 1,200 mm SHUT HEIGHT Lodpfxevm Eiro Aaneak Hydraulic Safety: present Hydraulic Safety

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop Lsdpfxsr I E Ite Aansak - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Year of construction: 2004, machine/vehicle number: 8778 02 04, SECOND-HAND GLUEING PANEL HOT PRESS ORMA MOD. LS43/13 - CE - 10 press cylinders diam. 70 - 5 pressors cylinders diam. 85 - 9 frontal cylinders diam. 65/45 - Oil boiler - Working dimensions 4300X1300 mm. - Complete with loading/downloading Laodjwrzkhopfx Aanek - Matr. 8778 02 04 - Year 2004 - COMPLETE WITH MANUAL AND CE DECLARATION

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Laedpsxd Auiofx Aanjk

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Lodswtw E Djpfx Aanjak On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2022438, type of input current: AC, power: 28 kW (38.07 HP), input voltage: 400 V, Equipment: documentation/manual, Monti Antonio 200 VSP-2250x1600 Thermal Press – As New Condition (Year of Manufacture: 2023) For sale is a nearly new Monti Antonio 200 VSP-2250x1600 thermal printing press (year of manufacture 2023, serial number 2022438). The system has been used exclusively for sublimation printing on blankets and is in perfect, fully operational condition. Technical specifications: Lsdpfxew Skhus Aaneak Year of manufacture: 2023 Serial number: 2022438 Connected load: 28.7 kW Power supply: 400 V / 3~ / 50 Hz Working area: 2250 x 1600 mm Net weight: approx. 5,870 kg Condition: as new, fully functional Application options: Sublimation printing (textiles, blankets, large formats) Laminating, bonding Thermal transfer and finishing processes Also suitable for applications in advertising technology and industrial textile printing The machine is immediately available and can be inspected on site by appointment.

Condition: excellent (used), functionality: fully functional, HOT PRESS model ITALPRESSE SCF 6 with hot platens second hand machine for wood, veneer, composite materials, furniture, panels etc plates useful size mm. 3000 x 1300 n.06 pistons diam.mm. 70 max. thrust Ton. 90 opening mm. 400 hot water plates heating with wood fired boiler weight kgs. 5000 Lodpfx Aaeq Slt Isneak volt. 380/50

Condition: used, SECOND-HAND HOT PRESS KOLMAG - Platens dimensions 2500X1300 mm Ledpfx Aaornkmajnsak - N. 4 cylinders

Condition: used, Prägepresse / Hot Foil Stamping Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Laodpfx Aajt Drnxenok On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Lajdpsh Ayg Uofx Aanok Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 18040, Kniehebelprägepresse - Embossing hot stamping press Hans Schilling HSMSerial-No. 18040 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lodpfx Aoh Axf Hoanoak On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 008226, Max working length: 3000 mm Max working width: 1300 mm Pressure Exerted: 30 Kg/cm2 No of Pressing cylinders: 6 Ledpfx Aex A Tbkjanjak

Condition: used, machine/vehicle number: 008212, Max working length: 4000 mm Max working width: 1400 mm No of Pressing cylinders: 10 Laedpfxjx A Tmto Aanok

Condition: ready for operation (used), Year of construction: 1969, HEIDELBERG HOT FOIL KSB Ljdpfx Asxygdaeanoak

Condition: good (used), Year of construction: 2019, machine/vehicle number: 223230, Offer 25279 Technical data: Lajdpfx Ajw Ekkwsanok - Tank capacity: 2000 L - Operating pressure: 11 bar - Maintenance opening - Ball valves - Pressure gauge - Space required: approx. W 1250 x H 2500 x D 1250 mm - Weight: approx. 450 kg

Condition: used, Heißpräge - Kniehebelprägepresse / Embossing Hot Stamping Press  Krause FNP Laedotzc Nnspfx Aanok Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: Lsdpfxjd R Saqo Aansak • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment: Lasdpfx Astubz Usansk  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Lodpfxev Akwge Aanoak Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. Laodpfxsqagpxj Aanek FIDE EF-180 For the production of long screws Range: Diam.14x200 mm. Ppm: 75 Overhauled to new by HBR Ltd.

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown Laedpferf Uqzsx Aanok - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar Ledpfxofh Skae Aaneak - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C TECHNICAL DATA: Ledjfdkcgspfx Aaneak - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers - Magnetic descaling device - incl. frame for water tank, 500 l water tank - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Lajdpfxjpl Ugzo Aansk Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) Ljdpfx Aajx E Untjnoak - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions.