HOT PRESS FOR EDGE-GLUED PANELS

ORMA LS 42/13 AS/BO

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Rcedpfswgbxzsx Abpef

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Rcsdpfx Ast Uduxsbpsf

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, Rcedoy Sbikjpfx Abpsf NC-extension table Ø700mm, operating mode 4.

Year of construction: 1998, condition: excellent (used), Press with working dimensions 4.5m X 1.9m Rcjdpolzi S Nofx Abpjf

Condition: used, Year of construction: 2017, Country of manufacture - Italy INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED Rcsdpsv Nkausfx Abpof FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Rjdjyxrtaspfx Abpscf

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Rcodpfx Ajxmgvcsbpsf Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine • 6 cooling fans • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: new, Cefla painting system Rcjdpfowhbrwjx Abpef

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Rcjdjtxnp Njpfx Abpef

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS Redpfxet Nfars Abpocf • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE