Used Transformer 200 Kva for sale (18,383)

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Fork thickness: 110 mm Mast type: Duplex Condition: Ready for operation and fully functional Hnjdpfx Aoydr Dzonvsn Technical condition: Normal Front tires type: Cushion tires Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 320 kg, total length: 1,750 mm, drive type: Elektro, construction width: 750 mm, Low lift truck Load center of gravity: 600 Fork width: 185 mm Fork thickness: 60 mm Hodpfx Ansu Dyw Aovenn Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 160Ah Description: In addition to this Armanni model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this SL PESATORE 200/200 P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Electronic weighing system

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Hnsdpfx Aey N R U Rjnvon Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion Hnsdpfsy N R Uqjx Anvsn 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 150 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,448 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Stacker Load centre: 600 Mast type: Standard Technical condition: Very good Hjdpfx Aoyn Su Ijnvsnn Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 24V Battery capacity: 225Ah Description: Factory-refurbished used machine from Toyota including new inspection and new certification according to FEM (formerly UVV). Impulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Hsdpfx Ajyv Sl Rsnvenn Front tyres type: polyurethane Front tyres condition: 100% Rear tyres type: polyurethane Rear tyres condition: 100% Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 360 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,440 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Load center: 600 Mast type: Standard Technical condition: normal Front tire type: Polyurethane Front tire condition: 60 - 80% Hodpfx Anjx Nta Aovonn Rear tire type: Polyurethane Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2022 Description: Thorough cleaning, black paint refresh, new tires/wheels, new inspection, new acceptance test according to FEM Impulse control, initial lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,880 h, load capacity: 2,000 kg, lifting height: 1,700 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 1,348 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Pedestrian stacker Load centre: 600 mm Mast type: Standard Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 26V Battery capacity: 105Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota, incl. new inspection and new approval according to FEM (formerly UVV). Hnedpfx Anjyxtwyjvon Pulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Hnjdpfx Ansqynq Rjvon Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN NEXUS 200-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Hedpfx Aozczd Ujnvenn Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control system Mazatrol Matrix 2 - Hydraulic HAINBUCH chuck, combination type, size 65 for main spindle - Hydraulic HAINBUCH chuck, combination type, size 65 for counter spindle - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), Digital display Heidenhain Center height 200 mm Distance between centers 800 mm Swinging diameter over carriage/bed 240/425 mm Length of the offset from the faceplate with 4 jaws 180 mm Spindle bore 51 mm Internal taper 60 Metric Tool holder Camlock D6" Spindle speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of the tailstock quill 70 mm Quill stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Facing 0.05-2.8 mm/rev Rapid traverse: Longitudinal Hjdpfozcvnuox Anvsnn Thread pitches: Metric 0.5-14 mm English 2-56 TPI Module 0.125-3.5 Motor 380 Volt, power 12.5 HP Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg

Condition: used, Used machine Condition: like new Hodpfx Aoxfc R Hjnvjnn Equipment and technical data to follow

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Hedpfxsw Nacvj Anvjnn Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 940 kg, total width: 1,200 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Lift kneader ++++ TOP model Diosna lift kneader ++++ Dough machine with simple, robust technology for a maximum of 200 kg of dough Stainless steel bowl and kneading arm 2 bowl carriages, 2 speeds Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Hsdpou A Hhrjfx Anvsnn Option: Delivery service Leasing & rental service Maintenance contract Service package Delivery with floor anchoring Instruction and commissioning We have a large selection of lift kneaders in stock!

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Hnedpfsvuumiox Anvjn Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: new, Manufacturer: Siemens Condition: New, original packaging opened Hjdpezcw Szsfx Anvonn Type: Control transformer Article number: 4AM6542-5CT10-0FA0 Rated power: 2.5 kVA Primary voltage: 440 V AC Secondary voltage: 230 V AC Frequency: 50/60 Hz Design: Single-phase control transformer Cooling: Air-cooled Mounting type: For switchgear cabinets and machine construction Application area: Industrial plants, machine tools, control and automation technology Series: 4AM Insulated transformer for supplying control circuits.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 07/2028, total width: 440 mm, total length: 540 mm, total height: 870 mm, input frequency: 5 Hz, overall weight: 90 kg, electrical fuse: 16 A, power: 1.1 kW (1.50 HP), Planetary mixer TOP model: SM 200 C proven technology ... already extensively tested! simple manual operation 3 gear speeds 1 stainless steel bowl, 20 liters 1 flat beater, 1 dough hook, 1 whisk bowl guard / safety guard tabletop model with bowl lift DGUV V3 certified – available only from us 220V connection Dimensions WxDxH in mm: 440 x 540 x 870 NEW machine & SAB certified 24 months warranty + spare parts service Hnjdpfx Ansu Sfglsvsn Optional: Delivery service additional bowls & beaters maintenance contract stand spare parts box leasing & rental service We have a large selection of planetary mixers in stock!

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Hnsdpfxox A Tcuo Anvon Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet Description: For sale is an industrial tempering oven / heating cabinet manufactured by Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for processing of large or multiple components simultaneously. The oven is controlled via a JUMO IMAGO 500 system, enabling precise temperature control as well as automated programs. Typical applications: - Industrial manufacturing - Plastics and metals processing - Component drying - Heat treatment - Testing technology / materials testing - Laboratory and research applications The system is built with heavy-duty industrial quality and designed for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width 2000 mm x Height 2500 mm x Depth 2250 mm External dimensions: Width 2900 mm x Height 3530 mm x Depth 2700 mm Load capacity: Interior load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Nominal power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total steam volume: 14.9 m³ Sound pressure level: < 70 dB(A) Safety temperature limiter cutoff temperature: 280 °C Adjustable temperature limiter: 270 °C Hnodpfx Ajytrzfjnvsn Weight: 1850 kg Condition: Used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Hodpfx Aszadatsnvsnn Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7881 Hodpfx Ajzac U Asnvonn Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, The Rollertech-E PM 2000 is a machine designed for automatic pallet wrapping where traditional wrapping methods are not possible due to dimensions, load instability or lack of access to a turntable. Hnjdpfx Aswn Hc Ionvsn TECHNICAL DATA • Wrapping height: 2000 mm • Display: 7-inch touchscreen • Control system: PLC controller • Charger: Built-in, high-frequency, 110–240 VAC, 50–60 Hz, 0.4 kW • Power supply: Batteries: 2 × AGM 12V, 85 Ah (24 VDC total) • Performance: Up to 100 pallets (80 pallets for PM version) per charge • Machine weight: 300 kg • Pallet height sensor: Photoelectric sensor • Pallet height: Manually set via control panel • Programs: 99 pre-programmed cycles • Speed adjustment: Lifting, lowering, upper and lower rotation • Photo sensor delay: Adjustable • Cycle types: Lifting; Lowering; Lifting and lowering with reinforcements at defined heights; Start from specific height; Top-only wrapping; Bottom-only wrapping • Password protection: Available for parameter security • Diagnostics: Shown on display • Charging monitoring: Shown on display • Distance from pallet: 110 cm • Minimum pallet weight: 80 kg (without film) • Minimum pallet dimensions: 40 × 40 cm Specyfikacja folii • Film roll height: 500 mm • Maximum film roll diameter: 275 mm • Film core diameter: 76 mm • Maximum film roll weight: 20 kg • Maximum film thickness: 35 microns

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Hnodpezca Uxsfx Anvon

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING Hnedpjwudkiefx Anven For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: ready for operation (used), IEC71L28-LC-FA2 series LC three-phase motor water cooled 400V , 200 HZ , 12 kw , IP65 , B5 - flange design, centering diameter 110 mm, 4 x bore Ø 9 on pitch circle 130 mm, shaft smooth 28 x 6 x 60 mm, rated speed: 12000 rpm, Max. Speed: 16000 rpm, dynamically balanced, coolant connection M14 x 1,5 , manufacturer unknown, used, normal traces of use, 100% functional, scope of delivery according to photos Hsdpei D Id Rsfx Anvenn