Used Transformer 200 Kva for sale (42,958)

Condition: like new (used), As new Tote Bins Capacity 200 Ltr Mobile on 4 nylon wheels Some complete with lids Qty 10 available Nedpfx Aasu Ti Sle Asdd

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Njdewc Rk Espfx Aa Aedd Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Nodjmnqc Hspfx Aa Aedd Loading possible

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder Nedpfxeh R Tvto Aa Ajdd double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: used, 200 running meters of Schäfer Palflex pallet racking Used goods in good condition, see pictures. height 6,5 m depth 110 cm, galvanized bay load 24000kg Beam length 4.1 m orange Beam with additional load / compartment 3000 kg Negotiated price: € 13.790,- net ex stock Offer consists of: + 49 pre-assembled frames, depth 110 cm, height 6.5 m +288 beams, length 4.1 m, 3000 kg load per compartment +576 pcs. suspension locks +196 concrete anchors Njdpfsvfnnzox Aa Ajdd Used corner protectors available immediately, surcharge per piece 15,- € net! Load capacity plates, documents etc. are included. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,685 kg, fuel type: diesel, tank capacity: 155 l, color: yellow, power: 102 kW (138.68 HP), output current: 158 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 88 kW (119.65 HP), nominal power (apparent): 110 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,390 mm, total width: 1,058 mm, total height: 1,681 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, PRP-Leistung: 80 kW / 100 kVA ESP-Leistung: 88 kW / 110 kVA Motor: AKSA A4CRX46TI Abgasstufe: 2 Drehzahl: 1.500 U/min elektronischer Drehzahlregler Betriebsspannung: 24 V Kühlung: wassergekühlt Generator: Aksa AK 480 Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 6120 - Notstromautomatik Njdpfx Ajwy Iyrsa Asdd Batterieladegerät: 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (155 L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Ndsdpfx Aajudvt Rj Aed Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Ndedpfx Aaovmzwxo Aed Generator: Piller Power: 1400 KVA Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: excellent (used), Year of construction: 2012, Viessmann Vitoplex 200 270Kw Used Year: 2012 Type:SX2A Power: 270Kw Njdpfx Aaetu Txzo Aodd Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Ndsdedz Agdepfx Aa Asd

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,685 kg, fuel type: diesel, tank capacity: 155 l, color: beige, power: 102 kW (138.68 HP), output current: 158 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 88 kW (119.65 HP), nominal power (apparent): 110 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,390 mm, total width: 1,058 mm, total height: 1,681 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: AKSA, type of cooling: water, PRP-Leistung: 80 kW / 100 kVA ESP-Leistung: 88 kW / 110 kVA Motor: AKSA A4CRX46TI Abgasstufe: 2 Drehzahl: 1.500 U/min elektronischer Drehzahlregler Betriebsspannung: 24 V Kühlung: wassergekühlt Generator: Aksa AK 480 Spannung: 400/231 V Spannungsregler: SX460 Nodpfx Aswy Ixzoa Asdd Steuertafel: DSE 6120 - Notstromautomatik Batterieladegerät: 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (155 L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Nedpfxstu Trus Aa Ajdd Loading possible

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Ndsdpfx Aaowu Ectj Asd Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: used, Year of construction: 2003, Steam boiler used Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture 2003 Nominal heat output: 375kw Boiler water capacity:1400l Operating overpressure: 8 bar Gas burner Weishaupt G/1E -Version ZMD-LN Power 80-550KW: year of construction: 2003 Connection pressure 15-500mbar. With existing fittings Dungs DN40 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Njdpofm E Ifofx Aa Asdd Of course we also take care of all formalities Loading possible

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA Ndjdpfx Aewu D Unoa Aod ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Nodjtu T I Uepfx Aa Aodd Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 915 kg, fuel type: diesel, tank capacity: 70 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,100 mm, total width: 960 mm, total height: 1,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: John Deere, type of cooling: water, AVS-Dieselstromaggregat DW 30 JD2 15 AK14A PRP-Power: 24 kW / 30 kVA ESP-Power: 26.4 kW / 33 kVA Engine: John Deere 3029DFG20 Emission Stage: 2 Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Mecc Alte ECP 28-VL/4 C Voltage: 400/231 V Voltage regulator: DSR Control panel: DSE 6120 Battery charger: 5 ampere Type: Canopied aggregate; weather-protected, soundproofed Njdpfx Aowu D Nlsa Aodd • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (70 L) and vibration dampers • Coolant preheater • Voltage and frequency regulation as per ISO 8528-5 • Unit suitable only for stationary use Please note that, according to applicable EU regulations, these units are not approved for mobile use. The generators are sold as B-grade goods. B-grade means that the units may have cosmetic defects such as surface rust or rust on the housing. However, these defects do not affect the functionality or performance of the generators in any way. By accepting this offer, you expressly acknowledge the described properties of the units and their associated condition.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Ndodpfx Aaowu Dbus Aed Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: good (used), Year of construction: 1998, Robot Kuka KR125/150/200 Ndodpfx Aaebywf Do Aed Manufacture Date 1996/1998 Reach 2400 mm Weight 975 kg/1025 kg Payload 125 kg, 150 kg, 200 kg Controller Type VKRC1 (VW/Audi Version) Weight 136 kg Software Version 4.1.7 SP08 Teachpendant Kuka VKCP1 Cable length 7m Larger number of pieces available Large volume sales preferred !

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 2,500 mm, retraction force: 200 t, Equipment: safety light barrier, FOR 400/200 TON H TYPE HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING KESTLUB CAPACITY (RAM) 400 TON CAPACITY (POT) 200 TON MOVABLE TABLE DIMENSIONS 1200 x 1500 mm FIXED TABLE TABLE DIMENSIONS 1200 x 1500 mm LOWER EXTRACTOR TABLE DIMENSIONS 1050 x 1330 mm PARALLELITY TOLERANCE 120 micron/mt. HORIZONTAL TOLERANCE 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. INTERMEDIATE SPACE 200 mm MAX. INTERMEDIATE SPACE 1200 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) PROPORTIONAL SPEED and PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. By entering different speed, stop and pressure values at different points of the pressing process, the effect of material and mold deformations on the work done is minimized. MAX. WORKING PRESSURE 250 Bar – Adjustable from Proportional Screen TOTAL MOTOR POWER 37 kW– IE3 MAIN PUMP 140 cm³ – REXROTH – Piston Power Regulated MOVING TABLE FAST Descent Speed 50 ~ 400 mm/sec. – Adjustable from Proportional Screen Ndjdov Dvv Repfx Aa Aed MOVING TABLE PLASTERING Speed 5 ~ 21 mm/sec. – Adjustable from Proportional Screen MOVING TABLE RETURN SPEED 50 ~ 450 mm/sec. – Adjustable from Proportional Screen POT TABLE FAST Descent Speed 10 ~ 40 mm/sec. – Adjustable from Proportional Screen POT TABLE RETURN SPEED 10 ~ 70 mm/sec. – Adjustable from Proportional Screen MAIN CYLINDER INNER DIAMETER Ø 450 / Ø 390 mm – Ck45 POT CYLINDER INNER DIAMETER Ø 320 / Ø 250 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS Ø 80 / Ø 50 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 5600 mm APPROXIMATE WIDTH OF PRESS 3250 mm APPROXIMATE DEPTH OF PRESS 2200 mm LOWER TABLE HEIGHT FROM THE GROUND 1400 mm PRESS SIDE WINDOW DIMENSIONS 500 x 1300 mm PRE-FILL VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH COOLING SYSTEM SUCTION – CIESSE OFF-LINE FILTRATION REXROTH ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH AIR FILTER REXROTH – 10 MICRON PERMEABILITY RETURN FILTER REXROTH – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR REXROTH VALVES USED REXROTH FILTER CONTAMINATION WARNING ELECTRONIC CONTROLLED LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN POT STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PARKER or ORDEL PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER RADIATION BARRIERS KEYENCE, LEUZE, PILZ or SICK – 2 tk. APPROXIMATE WEIGHT 25 TONS

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm Njdpjxvb Sdjfx Aa Aedd - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Ndedpfx Aaoxywgxe Aod Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Width: 6200 mm Depth: 1300 mm Height: 1610 mm Belt Specifications: 480 x 130 x 60 x 310 mm Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm Nsdpfjxtwqdsx Aa Aedd

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) Ndedpfx Aaocnic Dj Aod -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.