Used Trim Saw for sale (8,495)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 82900 € 1566.81 € Doppelsäulenführung Kjdewirb Ejpfx Aanjnf 8400x54x1,6 mm 20-100 m/min 650 mm 1000 x 600 mm rechteck 660 x 600 mm rechteck 440 x 600 mm rechteck 660 x 600 mm 880 mm 4 kW 7.5 kW 0.12 kW 4400 mm 2270 mm 2660 mm 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste Kjdpfx Aasdynpcjnenf -Coolant system -Manual

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm Kjdpfxox I Siyj Aanonf cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Kedpfx Aov A Hgdjanonf Weight 570 kg Total power requirement 3 kw

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Kjdpeufgnzefx Aansnf Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Year of construction: 2019, operating hours: 1,650 h, condition: ready for operation (used), Additional Equipment Knsdpfx Aajx D Irtsnsf Spray unit capacity: approximately 12 liters / Hydraulic oil capacity: approximately 5 liters / Coolant capacity: approximately 180 liters This MEBA MEBAmat 434 Metal Band Saw was manufactured in 2019. It features a band saw drive power of 7.5 kW and a cutting speed of up to 150 m/min. The machine can handle round material up to Ø434 mm and square material up to 434 × 434 mm. Weighing approximately 4000 kg, it's designed for robust performance with a hydraulic clamping system. If you are looking to get high quality cutting capabilities consider the MEBA MEBAmat 434 machine we have for sale. Contact us for more information. Application Types Sawing

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27700 € 529.07 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 560 mm 560 mm 750x560 mm rund 410 mm, quadrat 410 590 mm 1.1 kW 4 kW 0.12 kW 3400 mm 1000 mm 2050 mm 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump Knjdpfxswiqt He Aanof 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: Knedpfx Aaex Irx Ionjf - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Roller conveyor Kedpfx Aajx I Sitsnonf - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Ksdpfx Aajv A E Ndsnonf Weight 1600 kg Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: used, functionality: fully functional, – hydraulic blade stroke TECHNICAL SPECIFICATIONS: – motor power: 5 kW – max. blade diameter: 500 mm – max. cutting height: 145 mm Kjdpjx Ekm Ssfx Aanenf – max. cutting width: 750 mm – hydraulic blade stroke – overall table size: 1080 x 780 mm – height from base: 750 mm – infeed roller table: 260 cm / outfeed roller table: 240 cm – roller width: 510 mm – roller diameter: 80 mm – distance between rollers: approx. 400 mm – machine dimensions (L/W/H): 145 / 115 / 130 cm – weight: ~ 300 kg

Year of construction: 2019, condition: ready for operation (used), Main Drive Spindle speed range 3500 Table Table load 6500 kg Additional Equipment Shredder for waste Tiltable side pressure rollers in the cross-cutting area Vibration conveyor for waste after longitudinal cutting Tiltable grippers in the longitudinal cutting area FLEXCUT 02 with 2 movable sets and 3 double grippers in each set Label editor with barcode printer capability Online diagnosis Kedpfx Aaox D Ngrjnjnf This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information. Application Types Sawing (Wood)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 20700 € 397.44 € Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm Knjdpewiqtyefx Aanef 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2024, Used machine Year of manufacture: 2024 Condition: as new, machine is unused Features and technical specifications: Cutting height: 2200 mm Cutting length: 5100 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Saw blade speed: 4800 rpm Scoring blade diameter: 80 mm Scoring blade speed: 8500 rpm Stops: 2 pcs Sound pressure level: 89.2 dB(A) Lower material support with metal rollers Automatic retractable slatted frame Vertical digital measurement display Horizontal digital measurement display Panel positioning on movable rollers without lifting Dimensions and weights: Height: approx. 3100 mm Length: approx. 6300 mm Width: approx. 1800 mm Kjdpfx Aox H Dabjanonf Weight: approx. 800 kg Dust extraction connection: Extraction port diameter: 1 x 100 mm Air requirement for extraction: min. 1000 m³/h Air velocity: min. 20 m/s Electrical specifications: Drive motor power: 3 kW Connection voltage: 400 V Line frequency: 50 Hz Scope of delivery: Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal Scoring blade Ø 80 x 2.8-3.6 mm Z20 Availability: short notice Stock location: Röllbach

Condition: good (used), Machine is in good working condition. Kjdpfx Asx I Rdpoanonf

Condition: new, Year of construction: 2025, Machine type: Bandsaw - semi-automatic Band dimensions: 3055 x 27 x 0.9 mm Cutting capacity (rectangular): 200 x 350 mm Cutting capacity (round): 260 mm Cutting speed: 18 - 87 m/min Main drive motor power: 1.5 kW Weight: approx. 460 kg Dimensions (W x D x H): approx. 1700 x 1200 x 1600 mm Standard equipment: - Infinitely variable cutting speed control via control panel with display - Raising/lowering via control panel (hydraulic) - Manual vice, quick-clamping and lengthwise adjustable - Material stop - Emergency stop on control panel Kodpfex Narlex Aanonf - Brush for band cleaning - Coolant tank: 17 litres - Manual in English Options: - 2 pieces of standard 2-meter roller conveyor without measuring scale - 1 band saw blade 3,055 x 27 x 0.9 mm

Condition: used, Year of construction: 1997, functionality: fully functional, cutting width (max.): 610 mm, saw blade diameter: 600 mm, type of input current: three-phase, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm Knedpsx Ekmrofx Aanef - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm - Weight: 600 kg

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 1800 kg Knedpfx Aaex D H Tijnsf This SCHÜCO PDG SET was manufactured in 2008. A robust circular metal saw featuring a motor speed of 2800 rpm and a saw blade diameter of 500 mm. Weighing 1800 kg, it is fully functional and has been regularly maintained. Available for viewing under power on site. Contact us for further details regarding this machine. Application Types Sawing

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 23800 € 456.96 € Doppelsäulenführung Knedpfx Aewiql Njanef 5200x41x1,3 mm 20-100 m/min 460 mm 460 mm 650x460 mm rund 380 mm, quadrat 380 590 mm 0.55 kW 4 kW 0.12 kW 3100 mm 1000 mm 1800 mm 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping from above

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Kodpfx Aajvtdztsnonf

Condition: new, neu 060027 prompt, Zwischenverkauf v Türkei 7000 € 135.1 € 1 Schwenkrahmen 2730x27x0,9 mm 35/70 m/min 230 mm Knjdpjwirybofx Aanjf 230 mm 320x130 mm rund 210 mm, quadrat 190 rund 130 mm, quadrat 100 rund 180 mm, quadrat 150 805 mm 0.37 kW 1.3 kW 0.12 kW 1350 mm 700 mm 1300 mm 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 17770 € 341.18 € Schwenkrahmen 3010x27x0,9 mm 35/70 (PLC) m/min 20-100 (CNC/Touch) m/min 260 mm 240 mm Knedowiqpuspfx Aanof 330x120 mm rund 200 mm, quadrat 190 rund 120 mm, quadrat 115 220 mm 835 mm 0.37 kW 0.12 kW 2800 mm 2050 mm 1900 mm 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7" touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices material chute chip brush suggested max. diam. in automatic mode for full material: 150 mm user manual in English or German ALTERNATIVES: Model 330 AE CNC € 20.490,00 Model 330 AE Touch € 22.600,00

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min Knjdpfx Aewiq Iqsanof 450 mm 425 mm 695 x 425 mm rund 430 mm, quadrat 425 rund 320 mm, quadrat 290 690 mm 0.55 kW 4 kW 0.12 kW 3090 mm 1200 mm 1940 mm 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 53900 € 1018.71 € Doppelsäulenführung 7000x41x1,3 mm 15 - 120 m/min 560 mm 540 mm Knodpewiqx Nofx Aanof 810 x 530 mm rund 520 mm, quadrat 520 rund 520 mm, quadrat 520 rund 330 mm, quadrat 330 875 mm 1.1 kW 4 kW 0.12 kW 3850 mm 1700 mm 2450 mm 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Ksdpjwiqndsfx Aanenf Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. OPTIONS: Roller tables and band saw blades on request