Used Trough Auger for sale (729)

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. Nsdpfxon Hwqvo Advocp MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz

Year of construction: 2023, condition: new, The PNEUMATICO WORKBENCH, model WT-2, is designed to provide a pallet repair station with a robust and ergonomic work table. Pneumatico manufactures two table models, the WT-1 and WT-2. Nodeivz Dvepfx Advscp The PNEUMATICO pallet repair table, model WT-2, is a special model for the repair of EPAL / EURO type pallets. The table is equipped with a work surface with dimensions: 1350 x 1430 mm. During the design process, great attention was paid to discussions with companies in the pallet repair industry, which showed the engineers the elements of the table that are important from the user's point of view. Therefore, the Pneumatico WT-2 pallet repair table was equipped with a pneumatic pallet lift. Pressing down the pneumatic foot pedal raises the pallet by a few centimetres so that the pallet to be repaired can be easily rotated 360 degrees, minimising the operator's workload. Another important design element is the "trough" for turning the pallet vertically. This is the most energy-intensive activity in pallet repair. Pallet repairers have unanimously found that this element is very functional and has a direct impact on productivity.

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1270 x 508 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1324 x 457mm, Spindle speed 7500 rpm, Spindle taper BT40, Nodeyt Hf Sopfx Advscp Spindle Motor 40Hp, HAAS Control, 20 Station ATC, Programmable Coolant nozzle, swarf auger, Low Volt light

Condition: used, maximum load weight: 36,100 kg, overall weight: 49,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design, optimized for loading bed length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg * Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Low bed: * Low bed designed as a telescopic vessel bridge in a low construction with front extension and mechanical locking * Dimensions (L x W) approx. 6,850 mm x 2,540 mm * Supply lines are protected in the extendable beams and automatically adjust to the respective low bed length Nodpfex Uvllex Advocp Axles and suspension: * PENDLE-AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve for axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-plugs for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed outer frame, checker plate cover and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Braking system: * WABCO EBS-E braking system compliant with EU regulations, without connection cable to the tractor unit Painting: * Trailer color, RAL 3002 Carmine Red Included accessories: * Plug-in front wall made of steel, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches, without installation of supply connections on the tractor unit * Outer beam of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * One locking position every approx. 500 mm on the extension * 1 pair of steel ramps with climbing bars and locking bolts to bridge the low bed hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading platform * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading platform (LC 10,000 daN) on the top chord of the outer beams * Cutouts above the lashing rings * 1 hanging lashing ring each left and right on the outer rear crossmember (LC 10,000 daN) on the outer beams of the loading platform * Preparation for removable loading floor * Mounting strip at the front of the rear chassis to the low bed for loose approach ramps * Chassis with chamfered corners at the rear * Mounting strip for loose aluminum approach ramps at the end traverse of the vehicle * Remote steering from front and rear operable via wired remote control with push buttons, axle tracking control, without installation on the tractor unit * Mechanical bolt-lug coupling from the low bed to the chassis, for changing the loading platform or installing extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories: * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized

Condition: good (used), Bunker with auger bag ripper control auger in good condition wear cookies available please contact via fue mobile number Ncjdpfx Aopith Tsdvop

Condition: used, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2024, Year of construction: 2023, Equipment: ABS, Accident damage to the ramenfer floor 6x new tires with rims 40 foot tipper Own tipping unit, powered by the truck batteries Lift axle Water tank with soap dispenser Tool box LED lights Possible for transporting 40 feet We have the following for rent: 20 foot 2 or 3 axles 20 foot tipping chassis 40 foot tipper chassis 40 foot chassis with rear extension 45 foot multi-chassis 18 to 26 m³ rear tipping troughs Are you interested? You can request our price list at any time without obligation. We sell tires and rims for trucks & trailers of Nedpfx Adevvfwzevecp brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5

Condition: used, axle configuration: 2 axles, first registration: 06/2019, next inspection (TÜV): 06/2024, Equipment: ABS, Leaf spring drum brakes galvanized good condition 15x available Price 9900 Write to us with your requirements so that we can create an individual offer for you If not in stock, delivery time 7 to 9 weeks We sell tires and rims for trucks & trailers of brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 Ncsdevvfwuspfx Advsp 385 / 65 ? 22.5 We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Sillo trailers

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, Year of construction: 2019, Equipment: ABS, 2x lift axles 1x20 rear flush 2x20 1x40 1x45 Water tank tool box LED lights Write to us with your requirements so that we can create an individual offer for you We sell tires and rims for trucks & trailers of the Brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 If not in stock, delivery time 6 to 9 weeks Ncsdpfx Adov Afrxovsp We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Sillo trailers

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Model: TV 95 SL Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Filling volume: 70 l equipped as standard with: -Timer Nsdpfxjdwq Hgo Advjcp -Water tank -Water pump -Manual

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, Nedpfxjyvh Nxe Advjcp motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Cassel metal detector Nsdpfx Adsyvfl Ajvscp Approx. 40 linear meters of vibratory troughs

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection Nodpfx Asymkbdedvocp • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: excellent (used), Extraction installation Termoaspira 70M Power 7.5 kW Ncjdjyh T Sxepfx Advjp Pneumatic filter bag cleaning system Air return to the hall Auger for chip removal Rotary airlock valve

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Nedpfx Ajykn T Ssdvjcp Specifications: Capacity: 550 ft³ Dimensions: 44.8819 x 32.0866 x 39.9606

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. Nsdpefyadbjfx Advscp The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Depth: 1185 mm Height: 1440 mm Weight: 690 kg Nsdpfx Ajyh En Eodvjcp Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Nedpfxjyw Thco Advocp Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice).

Condition: used, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2024, Equipment: ABS, 3-axle SCHWARZMÜLLER aluminum half-pipe tipper semi-trailer 25 cbm Nodpfxeylr Uce Advjcp First registration: 04/2024 Mileage: 49,490 km Internal dimensions (LxWxH): 7,650 x 2,330 x 1,470 mm Unladen weight: only 5 t Loading height: 3,100 mm Fifth wheel height: 1,200 to 1,250 mm Aluminum trough in semi-circular segment construction Continuous 6 mm floor plate Wall thickness also 6 mm plus additional 6 mm aluminum wear plates in the rear area, approx. 3,500 mm long, continuously welded External aluminum tailgate, without discharge chute Automatic mechanical 2-hook central locking High-pressure front-mounted HYVA cylinder, 250 bar Roll-over tarpaulin with central locking Chassis: steel frame Crank landing gear WABCO trailer EBS with RSS anti-sway protection SAF axles with large 430 mm disc brakes, reinforced off-road version 1st axle: lift axle Speed-limited traction aid (Traction Help Plus) Automatic tipping lowering system Tyres: 6 x 385/65 R 22.5 Aluminum air tanks Tire pressure monitoring with sensors in wheels, display in driver's cab Full LED lighting 2 additional LED reversing lights RENTING is the new BUYING—available immediately from us with full-service rental or leasing.

Year of construction: 2025, operating hours: 100 h, condition: like new (used), functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine, purpose-built for the automatic filling and packaging of a wide array of products, ranging from fine powders to granular or chunky materials such as nuts, legumes, rice, seeds, or snacks. It merges high precision with intuitive operation, ensuring optimal production efficiency—an ideal solution for small, medium, and large-scale operations across the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging Solution: Automated workflow from pouch feeding, opening, filling, and sealing to date coding—delivering uninterrupted and highly efficient production processes. Versatile Applications: Suitable for a comprehensive range of products: - Powders: e.g., flour, spices, protein powder - Granular products: e.g., lentils, beans, rice, nuts, snacks, seeds - Granulates or blends Compatible with Pre-Made Bags: Handles high-quality pre-formed pouches made of multilayer laminated film or paper—with or without zipper. Precise Dosing: Features an integrated auger filler or optional volumetric dosing for precise filling by weight—with an accuracy of ±0.3–1.5%. Intuitive Control: Equipped with a modern SIEMENS touch screen for complete management of all parameters via a user-friendly interface. Hygienic Stainless Steel Construction: All product-contacting components are made from 304 or 316 stainless steel, are compliant with international hygiene standards, and are designed for easy cleaning. Safety & Efficiency: Automatic error detection prevents sealing defects or product loss. Integrated alarms for air pressure, overload, and pouch handling ensure maximum operational safety. 🔩 Technical Specifications Parameter Value Model HMD-G200 Packaging speed 5 – 55 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-formed pouch, with or without zipper Power 2.1 kW Power supply AC 380 V ±10%, 3-phase, 60 Hz Air pressure 5 – 8 kg/cm², Air consumption 0.4 m³/min Noise level ≤ 80 dB Bag opening Vacuum system Additional features Date coding, nitrogen flushing, vibration, air evacuation 🧠 Key Components from Industry-Leading Brands Component Brand Touch screen & Control SIEMENS Frequency inverter Bosch Rexroth Temperature controllers & Relays OMRON Pneumatics & Valves AIRTAC / Festo Vacuum pump ORION 🚀 Included in Scope of Delivery - Auger filler for powders and fine granular products - Stainless steel screw conveyor for automated product feeding - Integrated date coder - Horizontal conveyor belt for finished pouch discharge 💡 Your Key Advantages Nedpfx Adexqccmjvocp ✅ Reduce labor costs through full automation ✅ High throughput with consistent, repeatable quality ✅ Flexible configuration for powders, nuts, pulses, and blends ✅ Hygienic, robust, and easy to maintain ✅ Simple, intuitive operation with intelligent Siemens controls

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Njdpfx Aodzqn Djdvjcp Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions (top, LxW): 1200x1520mm - Loading hopper dimensions (bottom, LxW): 1000x1520mm - Outlet for shredded wood + auger - Rotor working width: 1500mm Nodpex Sq Rwofx Advecp - Main motor: 45kW - Pump motor: approx. 1.5kW - Number of knives: 41 pcs - Knife size: 40x40mm - Screen: 15mm x 20mm - Pusher drawer - Electric auto-reverse - Dimensions (LxWxH): 2450x2460x1720mm - Weight: approx. 3000kg ADVANTAGES – German-made – Very good condition – Used shredder Original photos Net price: 155,900 PLN Net price: 37,120 EUR depending on the 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Condition: used, maximum load weight: 29,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2024, loading space length: 13,590 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, loading space volume: 91 m³, Equipment: ABS, Coil well 9,000 mm for accommodating coils with a diameter of 900 - 2,100 mm. 20 x coil trough covers. Stake pockets in the coil well and in the outer frame. ----Kögel Light Coil. Construction specification available on request! ----* Lift axle * BPW axles * WABCO SmartBoard multi-function system * Coil well * Raise and lower device for air suspension * Sliding roof * Sliding curtain left and right sides * Anti-lock braking system (ABS) * Disc brakes * Air suspension * Roof tarpaulin de-icing system Ncodpfxeyuluzs Advjp * Load securing certified according to VDI2700 + DCE RL9.5 * Lashing rings in the outer frame * Outer perforated frame for load securing * Load securing certified to DIN EN 12642 Code XL * Aluminium rims * Tyre pressure monitoring * Rear access ladder * Rear doors * EBS * Without spare wheel ----Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We would be happy to make you a leasing or financing offer.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Njdjx Ap A Djpfx Advocp Okuma OSP-P200L controls Renishaw Probe Chip Auger Under maintenance / parts missing Sublocation - Building 3

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 12/2025, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Kempf SKM aluminum tipping trough * BPW axles with air suspension and disc brakes * 1st axle can be lifted * Tires 385/65R22.5 * Air suspension raise/lower * Spare wheel holder * Work lights * Roll-up roof tarpaulin Njdpfjvpa Nljx Advscp * Work platform with access * Aluminum drop supports * Brake pads on second and third axle replaced * Six air suspension bellows replaced * New TÜV approval We are happy to provide you with further information

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: red, empty load weight: 1,300 kg, brakes: other, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB TI-CAR 225 | Compact Loader / Mini Wheel Loader for Farming & Municipal Works The TICAB TI-CAR 225 compact loader is a multi-purpose mini wheel loader for farming, landscaping, utilities, agriculture, and municipal services. Thanks to its compact size and articulated frame, it works efficiently in narrow spaces, urban areas, sidewalks, yards, and warehouses. Ncedpfx Adjx Uqplovep Compatible with bucket, pallet forks, sweeper, snow blade, auger, and other attachments, the TI-CAR 225 is a powerful skid steer alternative with low fuel consumption and easy operation. Contact us for price, delivery, and technical details.