Used Trumpf L 3050 for sale (410)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,130 h, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Dkjdpfxowckt Hj Agfok Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Beam on-time: 21,660 h Laser on-time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 49,485 h, machine/vehicle number: A0270 A2061, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning variation: ± 0.03 mm Laser Cutting head: with CoolLine Model: TruFlow 5000 Power: 250 - 5,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Dedpfx Aewckyaegfokk Stainless steel: 20 mm Aluminum: 12 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 33 - 72 kW Connected load: 109 kVA Beam on-time: 26,620 h Laser on-time: 49,485 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 34,162 h, machine/vehicle number: A0220A1284, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 710 kg, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Workpiece and Speed Max. workpiece weight: 710 kg Max. axis-parallel speed: 60 m/min Max. simultaneous speed: 85 m/min Laser power: 4,000 W Accuracy Smallest programmable increment: 0.01 mm Positioning deviation Pa: ±0.10 mm Repeatability Ps: ±0.03 mm Control Control system: TRUMPF CNC path control based on Sinumerik 840D MACHINE DETAILS Electrical Data Connected load: 88 kVA Control voltage: 24 V Mains connection: 400 V / 50 Hz Fusing: 3 × 160 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Dksdswzir Eopfx Agfok Operating Hours Laser operating hours: 105,334 h Beam on hours: 34,162 h Dimensions and Weight Length (L): 9,300 mm Width (W): 4,600 mm Height (H): 1,800 mm Weight: 11,500 kg EQUIPMENT Water treatment system Vacuum pump Connections for nitrogen and oxygen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 26,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, cutting speed: 3,00,000 mm/min, workpiece weight (max.): 1,800 kg, TECHNICAL DETAILS Travel ranges X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser: TruDisk 5001 Maximum power: 5,000 W Wavelength: 1.03 µm Maximum sheet thickness Mild steel: 25 mm Stainless steel: 20/25 mm Aluminum: 20/25 mm Copper: 10 mm Brass: 10 mm Speed Simultaneous: 265 m/min Accuracy Positioning deviation Pa: 0.05 mm Maximum mean positioning deviation Ps: 0.03 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg Power consumption Dkedpfsxd Afhox Agfek Total system: 7–39 kW Resonator: 5 kW fiber Beam on hours: 26,000 h Operating hours: 68,000 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 54,710 h, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min Djdpfxswhpbto Agfokk C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: used, functionality: fully functional, Year of construction: 2008, Cooling unit Riedel / Trumpf L15/21-TR4-K03.24 Djdpfotqmigox Agfskk

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, laser power: 8,000 W, Manufacturer: TRUMPF Type: TruLaser 3060 fiber (L66) Year of manufacture: 2018 Working area 6000 x 2500 x 115 mm Laser power: 8000 watts Control: Siemens Sinumerik 840D SL Standard equipment Machine ⦁ Working area 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet with roller shutter ⦁ Automatic pallet changer in longitudinal direction ⦁ Gantry drive combined with linear direct drives ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Cooling unit ⦁ Integrated control cabinets ⦁ Longitudinal conveyor belt ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spraying system ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning Extended features: ⦁ External TruDisk 8001 solid-state laser with 1 LLK output (includes BrightLine fiber and Fusion Cut Performance Package) ⦁ DetectLine ⦁ Drop & Cut ⦁ Advanced Condition Guide sensors ⦁ Cameras 1+2 ⦁ Cross conveyor ⦁ Wireless Operation Point ⦁ Dust protection for device plate ⦁ High-speed cutting package ⦁ Copper cutting package - O2 and N2 cutting data ⦁ Brass cutting package - N2 cutting data Djdpfx Ajwl I Tvogfskk ⦁ Smart Collision Prevention (only in conjunction with TruTops Laser or TruTops Boost)

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each Dsdpfx Aowm I H Ssgfokk - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: not inspected (used), Year of construction: 2006, Laser from Trumpf Welding Cell, no warranty, preferrably for spare parts Dkedpfx Agevka Nnsfok

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h Dedpoxt Evnefx Agfjkk EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: excellent (used), Year of construction: 2008, Technical specifications: 2D laser cutting machine CNC control: SIEMENS Laser type: CO2 Working area: 6000 x 2000 x 115 mm Laser power: 7 kW Cutting capacity, steel: 25 mm Cutting capacity, stainless steel: 25 mm Cutting capacity, aluminium: 15 mm CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Pallet changer Cooling unit Operating hours “Beam On”: 13,600 Operating hours “Laser On”: 40,500 Dimensions (L x W x H): approx. 17,000 x 4,600 x 2,600 mm Weight: approx. 12 t Condition: Djdpfx Agexndmujfekk Very good condition Machine has only been used very little The seller is not liable for typographical or data transmission errors. The machine is in a condition, both visually and technically as well as in terms of wear, appropriate to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: 2D laser machine CNC control: SIEMENS Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 5 kW Cutting capacity (steel): 25 mm Cutting capacity (stainless steel): 20 mm Cutting capacity (aluminium): 12 mm Max. workpiece weight: 1250 kg Dksdpexyavvefx Agfek automatic pallet changer CE marking electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t The seller assumes no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is commensurate with its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 28,000 h, machine/vehicle number: A1240A0379, laser power: 6,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, No minimum price – guaranteed sale to the highest bidder! Machine can be dismantled and loaded for €2,000. TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Workpiece Max. weight: 1,700 kg Max. sheet size: 4,000 x 2,000 mm Max. speed Simultaneous: 140 m/min Control TRUMPF CNC control: Siemens Sinumerik 840D SL Precision Position deviation Pa: 0.05 mm Mean position scatter Ps max.: 0.03 mm Laser Data TruFlow 6000 Max. power: 6,000 W Wavelength: 10.6 µm Max. sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm Power consumption Total system electrical load: 11–82 kW MACHINE DETAILS Laser hours: approx. 28,000 h Electrical connection Frequency: 50 Hz Dkedpfxewycq So Agfjk Voltage: 400 V Dimensions and weight Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 13,000 kg EQUIPMENT Chiller unit Automatic longitudinal pallet changer Work area lighting Torque drive in combination with linear direct drive Enclosed machine frame with integrated laser unit Motion unit for high-detail processing Enclosed beam guidance Single cutting head strategy Positioning laser diodes Spraying device Machine is sold without LiftMaster and without the two scrap conveyors.

Condition: new, Year of construction: 2025, laser source manufacturer: TRUMPF, laser power: 6,000 W, Equipment: CE marking, TruLaser 1030 Lean Edition Offer Cost-Effective Swiss-Made Machine Efficient and Powerful Laser Cutting When it comes to laser cutting, value for money counts: the sturdy machines of the TruLaser Series 1000 Lean Edition perform their tasks efficiently and economically. With their relatively low investment cost, they are profitable even at low utilization rates. With 6 kW of power, they cut all materials up to 25 mm thickness and deliver top-quality results. Get started immediately: the machines are intuitive to operate, and cutting data is already integrated. Wide Range of Materials and Features Mild steel, stainless steel, aluminum, copper, brass, and FlyLine Technologies and processes for maximum process reliability and durability Collision protection, nanojoints Easy Operation Pre-qualified cutting data, cutting guide, online lens monitoring, multi-sheet processing, fully automatic pallet changer Including: Dodpfxexn Irbe Agfokk - TruLaser 1000 Lean Edition - Fully automated pallet changer and 6 kW laser - Programming software - Training & Services: * E-learning package for programming software * Operator training for software * Operator training for the machine TRUMPF Quality Worldwide, our rapid remote service support addresses your needs quickly and reliably. For further technical details, please refer to the technical data sheet or visit our website. If you have any questions, don't hesitate to contact us. About TRUMPF: With 100 years of company history, we've helped shape thousands of sheet metal fabrication operations in Germany alone. We share this experience every day with our customers. Thanks to innovative machines and features, the most comprehensive service concept on the market, and our experts in software, automation, and smart factory solutions, we always provide tailored offers to meet your requirements. PS: We are also happy to support you with financing. TRUMPF Financial Services offers financing, leasing, and pay-per-use models to help you successfully overcome financial and business challenges.

Condition: used, functionality: fully functional, Year of construction: 2000, We are offering this used TRUMPF TRUMATIC 600L laser cutting machine, year of manufacture 2000. Manufacturer: TRUMPF Model: TRUMATIC 600L Year of manufacture: 2000 Condition: used Category ID: 902 Type ID: 1180 Dkodpjx Runwofx Agfjk Type: laser cutting machine If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Dedpfx Aex Dkymogfekk Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: used, functionality: unexamined, Year of construction: 2003, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, TRUMPF Laser HL204P/4 LCU * used, MFD 2003 * av. laser power: 200 W * max. pulse power: 7 kW * max. pulse energy: 75 J Dkjdpoxxbnksfx Agfsk * wavelength: 1064 nm * beam switch for 2 fibers, min. core diameter 400 µm * fiber connector: LLK-B * incl. control PC * incl. foot switch * incl. 2 fibers, each 1 cutting- und welding head and 1 binocular * incl. documentation (German)

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm CNC control: Siemens Sinumerik 840D SL Maximum weight: 900 kg Simultaneous rapid traverse: 265 m/min Laser Laser source: TruDisk 3001 Sheet thickness steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminum: 15 mm Sheet thickness copper: 6 mm Sheet thickness brass: 6 mm Functions: PierceLine, FocusLine, NitroLine, PlasmaLine, ControlLine, FastLine Accuracy Position deviation Pa: 0.05 mm Average position deviation Ps: 0.03 mm MACHINE DETAILS Length: 8,300 mm Width: 4,000 mm Height: 2,400 mm Weight: 12,000 kg Power: 6 - 29 kW EQUIPMENT - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Automatic pallet changer in longitudinal direction - Wide longitudinal conveyor belt - Work area lighting Dsdpfev A Uzvsx Agfekk - Position laser diode - Spraying device - Automatic nozzle cleaning - Universal cutting unit with fully adaptive lens system - Protective glass to prevent lens contamination - CE marking - Light barriers - Multi-chamber extraction system - Integrated compact dust extraction system - Machine cover, certified viewing window, door on the right

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: fume extraction, Trumpf HL 1003D laser unit Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. Dksdpfowxq H Esx Agfok 2 optics with cameras.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Dsdpfoxdfqmox Agfskk Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 11,851 h, controller model: Siemens Sinumerik 840 D, laser power: 3,600 W, sheet thickness steel (max.): 8 mm, working length: 6,500 mm, working width: 250 mm, Laser cutting machine with comprehensive equipment! The machine was last serviced by TRUMPF on 21.03.2025. Machine will remain powered on until 12.09. TECHNICAL DETAILS Working area: 6,500 x 250 mm Laser power: 3,600 W Accuracy: 0.1 mm Material Thicknesses Max. mild steel thickness: 8 mm Max. stainless steel thickness: 6 mm Max. aluminium thickness: 5 mm Performance Max. speed: 100/60/60 m/min Control: Siemens Sinumerik 840 D MACHINE DETAILS Dkjdpfx Agjw Nqxhefsk Laser hours: 11,851 h Operating hours: 47,778 h Dimensions & Weight Machine dimensions (L x W x H): 17,300 x 8,600 x 3,000 mm Weight: 19,000 kg EQUIPMENT Circumscribed circle diameter 200 mm 3 m unloading station with brush table Front unloading station NitroLine FocusLine SprintLine Laser power control Automatic shutdown function Work area lighting CO2 Laser TruFlow 3600 Laser logbook function Chiller unit Cutting head with 155 mm lens Teleservice RJ network connection and USB port USB interface CE marking Light barriers Extraction and compact dust collector Protective cabin with Makrolon panels Clamping jaws D 15-200 mm U-shaped guide rollers for unloading station D = 200 mm 6 m unloading station with brush table Circumscribed circle diameter 250 mm incl. clamping jaw set and guide rollers SeamLine Tube Additional cutting head with 155 mm lens LoadMaster Tube 6 m with bundle support, 2 grippers Circumscribed circle diameter 250 mm LoadMaster Tube 6 m Low-scratch bundle support LoadMaster Tube 6 m Swiveling conveyor section LoadMaster Tube 6 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 34,647 h, machine/vehicle number: A1220A1568, laser type: CO₂ laser, laser power: 5,000 W, No minimum price - guaranteed sale to the highest bidder! Regularly serviced by manufacturer Trumpf LiftMaster Compact – compact and fast loading and unloading Submitting a bid obligates collection on time by 21/06/2025 TECHNICAL DETAILS X axis: 3,000 mm Y axis: 1,500 mm Z axis: 115 mm CNC control: Siemens Sinumerik 840D SL Workpiece max. weight: 900 kg Speeds & Accuracy Simultaneous speed: 140 m/min Position deviation Pa: 0.05 mm Average position scatter Ps max: 0.03 mm Laser power max. power: 5,000 W Wavelength: 10.6 µm Sheet thickness structural steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Djdpfxowpqmgo Agfokk LiftMaster Maximum sheet size loading/unloading: 3,000 x 1,500 mm Maximum stack height loading: 90 mm Maximum stack height unloading: 250 mm MACHINE DETAILS Length: 9,300 / 6,000 mm Width: 4,700 / 7,600 mm Height: 2,200 / 2,200 mm Weight: 12,000 kg Electrical power consumption (entire system): 11 to 76 kW Input voltage: 400 V Input frequency: 50 Hz Operating time: 74,617 h Laser hours: 34,647 h Cutting time: 14,901 h EQUIPMENT - FocusLine, NitroLine, PierceLine for flexible cutting processes - SprintLine, ContourLine, MicroWeld, FastLine, AdjustLine - Cutting head with LensLine technology (250 mm focal length) - Universal quick-change device for cutting heads (UTI) - Automated technology package for lens and nozzle automation - Nozzle changer - LensLine with automatic status monitoring - ControlLine for precise control - Beam centering - BrightLine for optimal cutting quality - Cooling group with heating for constant process conditions Notice regarding collection - A forklift (min. 2 tons) with driver must be provided for removal. - Crane provision is the responsibility of the buyer.

Condition: used, functionality: unexamined, If you need more details, feel free to write. Dedpfxowp Dfcs Agfekk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,886 h, machine/vehicle number: A0270 A 0120, laser power: 5,000 W, table length: 6,000 mm, table width: 2,000 mm, Submission of a bid obligates the buyer to collect the item by 30.09.2025! TECHNICAL DETAILS Dksdpfx Ajxbpagogfsk Laser power: 5 kW Work table External length: 6,000 mm External width: 2,000 mm MACHINE DETAILS Electrical connection Supply: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V Required fuse: 3 × 160 A Operating hours (as of 30.07.2025) Operating hours “Beam On”: 14,886 h Operating hours “Laser On”: 81,673 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring Dsdpfx Asxl T Rdogfskk - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming