Used Trumpf Lasercell 1005 for sale (412)

Condition: used, Year of construction: 2010, Trumpf TruLaser 1030 – Laser Cutting Machine - B&R Automation PC 820 CNC Control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of manufacture: 2010 Technical Specifications: Working Area: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Maximum Material Thickness: - Mild steel: 16 mm Iaedpfxoyghm Dj Abcop - Stainless steel: 8 mm - Aluminium: 6 mm Speed: - Max. cutting speed: 40 m/min - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ± 0.1 mm/m - Average positioning scatter: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 µm - Power stability: ± 2 % - Power distribution: TEM00 Compressed Air Consumption: - Standard cutting: 333 l/min - Air cutting: 500 l/min Electrical Data: - Drive type: maintenance-free three-phase motors - Connection: 65 kVA - Protection at 400 V: 100 A Dimensions & Weight: - Dimensions (W x H x D): 7396 x 2291 x 3287 mm - Total weight: 8850 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 63,800 h, machine/vehicle number: A0270 A0050, control type: CNC control, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 63,800 h, laser power: 5 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 6,050 mm, working length: 6,050 mm, working width: 2,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 2,000 mm, power: 87 kW (118.29 HP), overall weight: 24,000 kg, total length: 11,700 mm, total width: 3,900 mm, total height: 2,600 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, In working condition. Iasdexl Dt Ajpfx Abcjp Can be inspected in the workshop

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,15,000 h, laser power: 50,00,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 5000 W laser source and includes a LoadMaster sheet loading system for enhanced automation. The machine has an operating hour count of approximately 40,000 hours with the beam on and 115,000 hours with the laser on. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO2 laser cutting machine we have for sale. Contact us for further details. • Control voltage: 24 V • Power supply: 400 V / 50 Hz • Total connected load: 105 kVA Iodpfxoyuw Dbs Abcsap • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating hours (beam on): approx. 40,000 h • Operating hours (laser on): approx. 115,000 h Additional equipment • Automation: LoadMaster sheet loading system

Condition: ready for operation (used), Year of construction: 1995, operating hours: 85,000 h, stroke length: 215 mm, number of axes: 4, overall weight: 9,450 kg, pressing force: 87 t, This 4-axis TRUMPF TrumaBend V85 S was manufactured in 1995. It features a press force of 850 kN and a stroke of 215 mm, making it suitable for various bending applications. With a machine weight of 9,450 kg, it offers stability and durability. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 S press brake we have for sale. Contact us for further details. Ijdpfxjyuw A Rj Abcsap • Max operating pressure: 335 bar • Stopping time: approx. 97 ms • Safety distance: approx. 170 mm • Power supply: 3 × 400 V • Rated current: 22.5 A • Frequency: 50 Hz • Total connected load: 14 kVA • Control voltage: 24 V • Compressed air connection: 6 bar • Axis configuration: 4 axes (Y1 / Y2 / X / R) • Operating hours: approx. 85,000 h Technical Specification Bending Length 2500 mm

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Iaodpfjx D Nkdsx Abcjp Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. Isdpfx Absvvl I Tscjap The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Layer thickness (adjustable): 20 - 150 μm Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 24,184 h, machine/vehicle number: A0230A1546, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 24,184 h, laser power: 5,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, The machine has been serviced by TRUMPF under a maintenance contract. The machine can be inspected in operation in Budapest, and prompt collection is possible. Ijdpsyu S Ihjfx Abcsap

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, Used TRUMPF TruMatic 6000 (K01) – Medium format Ijdpewkd Efefx Abcsap Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Laser TrueFlow 2000 with laser power: 100-2,000 watts NC operating hours: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Conversion to TASC5 laser control (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Shears very good condition. Iaodpsuhm Rbefx Abcjp

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features Isdpouhm E Sofx Abcjap The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off Iasdpjytpimefx Abcjp - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), functionality: fully functional, Year of construction: 2008, Servo-electric press brake Make: TRUMPF Model: TruBend 7036 Year of manufacture: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 7036 Year built: 2008 Press force: 36 t Bending length: 1020 mm Working height approx.: 1150 mm Space required: 1805 x 1330 x 2380 mm Iajdpfsyr Nckjx Abcep Weight: 2,600 kg Standard Equipment - Rigid machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Optional Equipment - Tool clamping (Wila) top and bottom - Integrated TRUMPF TASC 6000 control - Safety light curtain at front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-swiveling safety doors - Protective rear cover - 2-button foot switch for standing and seated operation - CE marking Tooling - Lower tool EV/S-W10, V10/84°/R1, H 100 mm, L = 1000 mm, segmented - Upper tool OW200/K, offset, 86°/R1, H 100 mm, L = 1000 mm, segmented All information subject to change. A powered demonstration is always possible in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop Ijdpfx Aoytfyzsbcoap for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 2007, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm]: 2210 Pressing force [tons]: 85 Controller: TRUMPF TASC 6000 Operating hours [h]: 90816 Hydraulics ON [h]: 57234 Standard Equipment: - Rigid machine frame in all-steel construction - Stress-relieved press beam - 4-cylinder upper drive - Block hydraulics with quiet double pump - Backgauge with CNC-controlled X and R axes - Manual upper tool clamping - Hydraulic lower tool clamping - Manual crowning - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control - Standard safety features + Increased installation height/stroke +230 mm + 6-axis backgauge system + Hydraulic upper tool clamping + CNC-controlled crowning + BendGuard + 2x support consoles + Short park position (190 mm) + Rear work area lighting Iedpfx Aboytfrwscoap + Front work area lighting

Condition: good (used), functionality: fully functional, Year of construction: 2010, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Iodpfx Ajytfqmsbcoap Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 130 t, Bending length [mm] 3230 Pressing force [ton] 130 Control system TRUMPF TASC 6000 Basic equipment: - Sturdy machine frame as all-steel welded construction - Pressure beam with high bending strength - Electro-hydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge with rack-and-pinion drive for X and R axes, safe repositioning of the backgauge fingers from the front - Upper tool clamping system "New Standard Clamping II", manual - Lower tool holder for EV dies, hydraulic clamping, programmable positioning (2 positions) Iaodsytfktjpfx Abcjp - Safety device, rear roller safety cover - Control cabinet air conditioning - Network capable - Manual crowning, centrally adjustable + Increased installation height / stroke +230mm + 6-axis backgauge system + Hydraulic and hardened upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Rear workspace lighting + Front workspace lighting

Condition: excellent (used), Waterjet Trumpf water cutting machine for sale: It has Trumpf mechanics and new electronics: new control panel with new ac servo motors; Mach 3 water jet control software; Working table dimensions: 2.5 m x 1.25 m. There is a possibility of adding the plasma cutting technique, so the machine could be used for both plasma cutting and water cutting. The machine can be tested in our company. We also have the option of selling waterjet pumps. Ijdpfxeyghfae Abcjap

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Total power: 13 kW Weight: 8,750 kg Iasdpfsw D Abrsx Abcop Machine dimensions: 3190 x 2100 x 2375 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Accessories: - Tool change cassettes - Table with ball rollers Isdpfx Aoyrcycebceap - Operating hours: 97,000

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 9000 h Regular maintenance carried out by Trumpf Detailed information available upon request Iajdpfx Abeypcdiecep

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Iasdpfjyrf Dksx Abcop Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min Ijdpfxoym A Hro Abcoap • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,333 h, controller manufacturer: TRUMPF, This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Extra Information Iodpfxjx D R Ude Abcjap • Working Area: X=2500 mm / Y=12000 mm • Axes: 2 x 32 kW • Laser Heads: 2

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis working range: 2500 mm without repositioning • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders Iasdpfxox Uqzzj Abcjp • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, overall weight: 10,400 kg, total height: 2,900 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Laser output: 2 kw • Laser type: fiber trudisk 2001 • Beam on working: 30000 hours • Electric consumption entire unit: 11 kw • Control: siemens sinumerik 840d, b&r automation pc 620 • Simultaneous positioning speed: 85 m/min (x+y) Ijdpfx Aeyap Sbobceap • Working area (x x y x z): 3000 x 1500 x 75 mm • Brass: 3. 0 mm • Copper: 3. 0 mm • Mild steel: 25. 0 mm Extra Information Machine still under power Dimensions Machine Depth 7800 mm