Used Trumpf Minimatic 100 for sale (414)

Condition: used, Year of construction: 2021, Working area 3000 x 1500 mm Knsdpfxsxr U U Re Aanef Max. laser capacity 4 Kw (TruDisk 4001) Max. thickness 25/20 mm (Mild steel/Stainless steel) Integrated camera for process surveillance (with monitor interface) Control: Siemens Sinumerik 840 D SL with 18” touch screen Automatic speed regulation Programmerbel automatic shut down of the machine Kobber cutting package Brass cutting package Equipped with: Automatic pallet changer Price when bought in 2021: Euro. 365.000

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Kedpfewld Suex Aanonf Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: A1221E0223, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumetrik 840 D SL, Equipment: CE marking, safety light barrier, Type: TruLaser 3030 fiber (L81), Year of manufacture: 2020, Working area: 3000 x 1500 mm, Laser power: 4000 watts, Control: Siemens Sinumerik 840 D SL, Max. sheet thickness/steel: 20 mm, Max. sheet thickness/stainless steel: 20 mm, Max. sheet thickness/aluminum: 20 mm, Max. speed: 170 m/min, Accuracy: 0.1 mm Dimensions: Length 9,229 mm, Width 6,145 mm, Height 2,200 mm, Weight: 11,700 kg Machine number: A1221E0223 Equipment: • Longitudinal conveyor belt • Integrated control cabinets • Integrated storage compartment • Work area lighting • Positioning laser diode • Spray device • Permissible ambient temperature: 5–40°C • Machine status indicator • Dust protection for electronics panel TRUMPF Laser: • HighSpeed Cutting Package and Performance Package • Fusion cutting • Pump diodes drive • Laser power control Cutting Unit: • Single-cutting-head strategy • Universal cutting unit with adaptive lens system • Protective glass • Online protective gas condition monitoring • Automatic nozzle centering Control System: • SINUMERIK 840D SL control • Fast re-production • Integrated technology database • Copper cutting package • Brass cutting package • Automatic shutdown • Programmable selection of cutting gas/pressure • Microweld • Production planning • Remote support interface • Multi-sheet processing • Condition Guide • Cutting Guide • Advanced machine sensors for Condition Guide • Ergonomic control panel with 21.5" widescreen multi-touch display Functions: • AdjustLine • ControlLine • FastLine • FlyLine • NitroLine • PierceLine • FocusLine Data Transmission: • USB interface • RJ45 network port • Central Link • Online Update Manager Safety: • CE marking Kjdjxz Dwaepfx Aanjnf • Light grids • Multi-chamber extraction system • Machine enclosure with certified viewing window (right door) Additional Equipment: • Support rails made of structural steel • Compact dust extractor • TruDisk power supply via machine • Sliding roof • Automatic longitudinal pallet changer • External TruDisk 4001 solid-state laser with 1 fiber output included • 1 fiber output • BrightLine fiber • Performance Package fusion cut • HighSpeed cutting package • HighSpeed ECO cutting package • Drop & Cut • Integrated camera 1 for process monitoring • View of front work area (approx. 2.5 m) • Exhaust connection fitting for compact dust extractor • Wireless Operation Package + Including Storemaster

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 50,115 h, MACHINE DETAILS Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 50115 h Ksdpfott Nr Tsx Aanenf Laser ON: 49819 h Beam time: 12287 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Power measurement during machine dismantling: 5,462 W (end of October 2025) (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. All parts are available at short notice. Ksdjxzivbspfx Aanenf

Condition: good (used), functionality: fully functional, Year of construction: 1997, operating hours: 19,891 h, machine/vehicle number: 885170, control type: CNC control, controller manufacturer: Delem, bending force (max.): 130 t, working width: 3,050 mm, stroke length: 365 mm, throat depth: 410 mm, distance between stands: 2,700 mm, installation height: 535 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 4, table height: 970 mm, type of crowning: CNC-controlled, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 260 mm, overall weight: 12,950 kg, total length: 3,600 mm, total width: 2,250 mm, total height: 3,000 mm, power: 12.5 kW (17.00 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Technical data: - Max. working length: 3050 mm - Frame opening: 2700 mm - Max. pressing force: 1300 kN - Throat depth: 410 mm - Ram stroke: 365 mm - Pneumatic connection: 6 bar - Space requirement approx. W 3800 x H 2900 x D 2400 mm - Weight approx. 13,000 kg - 4-axis CNC control DELEM Knodpfexdhk Ajx Aanjf - Two-hand control panel with 2 foot switches - Crowning device - Controlled back gauge with height adjustment - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Indicated operating hours: 19,891 h - Hydraulic tool clamping top and bottom - Program-controlled lower tool displacement (I-axis) for 2 positions

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 63,800 h, machine/vehicle number: A0270 A0050, control type: CNC control, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 63,800 h, laser power: 5 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 6,050 mm, working length: 6,050 mm, working width: 2,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 2,000 mm, power: 87 kW (118.29 HP), overall weight: 24,000 kg, total length: 11,700 mm, total width: 3,900 mm, total height: 2,600 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, Machine can be inspected at workshop. Knodpexl Dt Ajfx Aansf

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Knsdpfxexqtx Se Aanef Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: L3423M0470, laser power: 200 W, laser wavelength: 1,064 nm, overall weight: 500 kg, Trumpf TruPulse 203 Laser Voltage: 380 V -10% to 460 V +10%, 3-phase AC + PE Protection Class: IP 54 Power: 10 kW / 16 kVA Knsdpfxexnbt So Aanof Current: 23 A Frequency: 50 to 60 Hz Weight: 500 kg Short-Circuit Current Rating (SCCR): 5 kA Wavelength: 1064 nm Output Power (Pulsed): 200 W Pulse Energy: 55 to 90 J Pulse Width: 0.3 to 50 ms Repetition Rate: 833 Hz Beam Divergence: 12 mrad Peak Power: 6 to 8 kW Fiber Diameter: 300 µm

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Kodpfx Aasu S Ny Tonenf Very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 Kedpeuthz Tsfx Aanenf TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Tool presetting devices for Trumpf punches and dies. Price per unit: €300.00 net Knedpfx Aaoxk Tyconof

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Kjdpfsvu Syyjx Aanenf Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Knedpfx Aoxfim Ieansf

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Sheet return device Kodpfxoxrv Aps Aanenf Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Kedpotpguzofx Aansnf Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) Kjdeu Ibvhopfx Aanonf i.D. *

Year of construction: 2000, condition: good (used), Spare part for Sheetmaster and Gripp Trumpf medium format TC 600L / TC 500R, suction plate complete , with suckers, suction plate, valves, controllers, gearboxes, motors Y / X axis with gearbox and rotator, light barriers, claws,air cylinders etc. see pictures Knjdpfxjh Dixgj Aanef

Year of construction: 1997, condition: ready for operation (used), Press force: 500kN, bending length: 1270mm, stroke: 215mm, max. operating pressure: 290bar, throat depth: 410mm, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 2000mm/2100mm/2500mm, weight: approx. 4750kg. Documentation available. An on-site inspection is possible. Knedoxxzh Ropfx Aanof

Condition: excellent (used), Year of construction: 2011, Beam on: 26,620 h Laser on: 49,485 h Knedpexfh Evjfx Aansf

Condition: excellent (used), Year of construction: 2021, Trumpf TruLaser Tube 3000 (2021) 2000W Manufacturer: Trumpf Model: TruLaser Tube 3000 Condition: used, as new Knodpoxrpb Ejfx Aanof

Condition: excellent (used), Year of construction: 2007, Technical data: 2D laser machine CNC control: SIEMENS Kedpfxsxyavvj Aanjnf Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 5 kW Cutting capacity (steel): 25 mm Cutting capacity (stainless steel): 20 mm Cutting capacity (aluminium): 12 mm Max. workpiece weight: 1250 kg automatic pallet changer CE marking electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t The seller assumes no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is commensurate with its age; used machines are sold without any warranty.

Year of construction: 2000, condition: defective spare-parts repository (used), Sell spare parts for a Trumpf TC 600L ram control new / used die acceptance punch holder drive motors this is only a small extract of what I have. Please just ask what you need. Knsdpjffyg Hefx Aansf

Year of construction: 2010, condition: ready for operation (used), Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible. Kedpfx Aajxxzh Djnenf

Year of construction: 2000, condition: used, Tool holder underneath for punching laser machine TC 600L used. Kodpfxebh Hf Nj Aanjnf