Used Tunnel Furnace for sale (1,532)

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 400220/659/2017, functionality: fully functional, temperature: 650 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, Warwick dry nitriding furnace, in very good condition, like new. Guedoy Eg U Ejpfx Anxob

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg Gusdpfx Aneytpxhexob

Condition: good (used), Year of construction: 2010, Secomak Shrink tunnel Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph Gujdsyw S Tdopfx Anxeb

Condition: used, functionality: limited functionality, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, empty load weight: 20,650 kg, maximum load weight: 6,000 kg, Year of construction: 2023, Operation: Radio remote control Fire suppression system: Ansul Width: 2,335 mm Height with bucket raised: 4,400 mm Length, standard machine: 8,945 mm Height with bucket lowered: 2,235 mm Gjdpfxoytcy Ee Anxeub Engine power: 168 kW / 225 HP Engine: Cummins B6.7, EPA Tier 4F/EU Stage V Tipping force, mechanical: 12,500 kg Breakout force, hydraulic: 13,400 kg Handling capacity, standard bucket: 6,000 kg Operating weight (empty): 20,650 kg Axle load front/rear: 8,910 / 11,750 kg

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Gusdpeycvxmofx Anxeb Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Godpfx Anoywpabsxeub Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: ready for operation (used), Italdibipack Semi-Automatic Shrink Wrapping Machine + Shrink Tunnel Complete shrink packaging line – ready for immediate use! High-quality Italian Italdibipack shrink wrapping line consisting of a semi-automatic shrink wrapping machine and a separate heat shrink tunnel. This reliable packaging system is ideal for packaging products such as boxes, printed materials, food products, cosmetics, hardware, and many other retail or industrial items. The machines are currently mounted on euro pallets and ready for immediate pickup. Main features: • Manufacturer: Italdibipack (Italy) • Semi-automatic shrink wrapping machine • Separate heat shrink tunnel • Complete packaging line • Reliable industrial construction • Easy to operate control panels • Suitable for many product types • Immediate availability Technical details: Shrink tunnel: • Tunnel opening height: 150 mm • Conveyor width: 330 mm • Conveyor type: rotating belt • Power supply: 3-phase Wrapping machine: • Semi-automatic operation • Power supply: single phase Condition: The machines are in good used condition and were previously used in production. They are being sold due to closure of the previous operating location. Both units are already placed on euro pallets, making loading and transport easy. Delivery:• Immediate pickup available • Machines are ready for transport • Located in Finland Perfect for: Guedeywn Nbopfx Anxob • Contract packaging companies • Food producers • Printing houses • E-commerce packaging • Small and medium manufacturing Contact: Please contact for additional information, pictures or transport arrangements. Machine can be demonstrated powered on before loading. Price negotiable for quick deal. Keywords: Italdibipack, shrink wrapping machine, shrink tunnel, shrink wrapper, heat shrink tunnel, L sealer, semi automatic shrink wrapper, packaging machine, Smipack shrink wrapper - used shrink wrapping machine for sale - Italdibipack shrink wrapper - shrink tunnel packaging machine - Smipack - Minipack Torre.

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation Guodjywuzwspfx Anxeb - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Guodpfx Aefzccnonxsb ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Gusdpfxsfx Nfmo Anxjb Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Gusdoxcb Hnspfx Anxeb

Condition: ready for operation (used), RESERVED!!! We are selling a premium continuous dryer due to a restructuring, suitable for ambitious beginners and professionals alike: HIX Dryer Model 3616 - Sophisticated recirculation system with 2 separately controllable motors (more information available upon request) Gedpfoyzbbrex Anxoub - Extraction at both the dryer inlet and outlet - 6 heating zones - Belt width: 91 cm - Temperature sensor directly inside the drying tunnel - Low energy consumption thanks to excellent insulation and 3-wall design - 380-400V, 18.5 kW connected load - Dimensions: 489 x 112 x 148 cm - Mounted on lockable castors NOTE: There is a German company specialized in these premium machines, ensuring professional maintenance and spare parts supply are available. THE SYSTEM IS CURRENTLY IN OPERATION AND CAN BE TESTED BY APPOINTMENT! Loading assistance can be provided. Both the intake and discharge sections can be dismantled for transport if necessary.

Condition: like new (used), Year of construction: 2002, Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Producer: Schur Machine Model: E 340 Year of production: 2002 Gusdpfx Ashqfnljnxeb Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!

Condition: good (used), Year of construction: 2007, 347 USED Hobart tunnel washer. Gusdpfx Ansyt Nwwjxob EXTERNAL DIMENSIONS (in cm): - H: 220, - W: 145, - L: 540. ENTRANCE DIMENSIONS (in cm): - W: 86, - H: 46. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° Gedpfxjvhazfo Anxoub MARCELS MASCHINEN AG

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW Guodpfelkb Ezex Anxob - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: as good as new (ex-display), operating hours: 1 h, Crate and basket washing machine. Plc controlled washing and drying tunnel for parts cleaning. Operating Principle : This is a worldwide patented machine which has a special procedure for washing and drying. (Patent number : 2016 / 02545) After the basket (or part like KLT, box etc.) is placed over the loading conveyor, a special unit locks and draws the basket inside the washing tunnel (auto loading) and once the basket is inside the machine spray washing begins. Basket is rotated 360 degre on its own axis while washing and drying. Rotation movement provides perfect washing and drying for the parts. All of the washing process is controlled via PLC. Machine has 2 washing unit , 2 rinsing unit and 1 drying unit. Cycle time : 30 seconds for 1 basket or KLT box Machine external dimensions : 12500 mm (length) Dimensions of basket: 600 x 400 mm , Height (adjustable) : Max : 280 mm Heating : Electrically heated with resistances. Washing pumps : Heavy duty stainless steel washing pumps. Gsdpfx Anod Izzxjxjub Automatic liquid fill valfes and liquid level control for all tanks. Machine will be manufactured according to your technical specifications. Please feel free to contact us for further details.

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Gusdpfx Aned I E Iroxob Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: -Spray wash -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.

Year of construction: 2023, condition: new, Spiral washer, used for cleaning small parts like bolts-nuts-screws etc. Tunnel-type spiral washer, parts are loaded via vibrating table and transferred via spiral conveyor. Washing-rinsing-drying options are available Guedpfxsfhb Ice Anxob Parts washer for small parts. Automatic washing machine, small parts washing, stamped parts washing machine, spiral washer, bolt washer, nuts washer, screw washer

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Operation Process ► Pre wash ► Main wash ► Rinsing ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. Gsdpfx Aod I Azvonxoub tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Gedpfeyuztgsx Anxjub Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Gjdpfxex Dy Sfj Anxeub

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Model: HTC5030D Year of manufacture: 2018 No operating hours! Pass-through width: approx. 50 cm Pass-through height: approx. 30 cm Overall length: approx. 220 cm Godpfx Asx Avxrjnxsub 21225

Condition: used, functionality: fully functional, Capacity will depend on the product to be used. Gsdewny Spjpfx Anxjub

Condition: like new (used), Machine that enables cooling of any format. The cooler is divided into the following groups: 1- Can inlet. 2- Cooling corridor - ZONE 1 - ZONE 2 - ZONE 3 3- Jar outlet. 4- Drying. Includes: - Infeed and outfeed belts with variable speed motor. - 3 centrifugal pumps - Chemical dosing pumps. Output may vary depending on the format. Gusdpfjx S Iu Tjx Anxeb