Used Turning Device for sale (18,319)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) Bljdpfxjyaqgyo Amnei - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Blodsxmd T Eopfx Amnei Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Bodpfxsxmd Txj Amnsli Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Bljdpsxmd S Isfx Amnji Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: used, Mobile suction unit used technical data follow Bsdpfx Amettxf Uenjli Availability: short term Storage location: Röllbach

Condition: used, used extraction unit mobile extraction nozzle 120 mm motor 0.75 kW 1180 Pa Availability: approx. end of May/beginning of June Blsdpew I U Siefx Amnei Stock location: Aschaffenburg

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Blsdpfxjy S Tm Ue Amnji Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Bjdpfx Amjyxxhqsnoli

Condition: used, Year of construction: 2010, operating hours: 29,870 h, functionality: fully functional, machine/vehicle number: 8045000191A, DMG CTX 510 eco – CNC Universal Slant-Bed Lathe Manufacturer: DMG (Gildemeister / DMG MORI Group) Model: CTX 510 eco (Ecoline Series) Year of Manufacture: 2010 Control Unit: Siemens Overview The DMG CTX 510 eco is a robust and powerful universal CNC lathe designed for heavy-duty turning and precision machining. Featuring a high-torque spindle and a 45° slant-bed design for excellent chip flow and thermal stability, this machine is ideal for both small batches and production runs. Key Technical Specifications Max. Swing Diameter: 680 mm Max. Turning Diameter: 465 mm Max. Turning Length (Z-axis): 1,050 mm Spindle Speed: 3,250 RPM Main Spindle Power: 33 kW (40% DC) / 22 kW (100% DC) Spindle Torque: 630 Nm (High torque for heavy cutting) Bar Capacity: 76 mm Rapid Traverse (X/Z): 30 m/min Turret & Tooling Number of Tool Stations: 12-position turret Tool Holder Type: VDI 40 Driven Tools (C-Axis): Equipped with C-Axis and milling capability for 3-axis machining. Included Equipment & Features Steady Rest ,Tailstock,Chip Conveyor Coolant System: High-pressure pump and tank. Bodpfx Amoy D Il Asnsli Physical Dimensions Weight: Approx. 7,800 kg Footprint: Approx. 4.5m x 2.4m x 2.0m Condition Well-maintained machine from a professional environment. Original DMG signature build from the FAMOT factory. Available for inspection

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Max. spindle power: 15 kW Bedpjzgw Aasfx Amnoli Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Bsdpszgwp Hefx Amnsli Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: used, Year of construction: 2023, operating hours: 3,700 h, functionality: unexamined, machine/vehicle number: 22260005, travel distance X-axis: 255 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 382 mm, Equipment: documentation/manual, j.stumpf [at] ivg.auction CNC turning machine SCHUSTER VD20 with automation and peripherals Technical data Blsdpfezdtqnjx Amnji Working area Maximum turning diameter: 250 mm Maximum turning length: 250 mm Number of spindles: 2 Number of tool positions: 12 Control system: SIEMENS Sinumerik 840D SL Year of manufacture: 2023 Serial number: 22260005 Recorded operating hours: 3,635 Electrical connection: 3P~ / N / PE (TN-C-S system) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V DC Total weight: approx. 14,000 kg Travel paths / feeds Z-axis: Travel path 370 mm, rapid traverse 50 m/min, maximum acceleration 8 m/s², feed force 9,000 N X-axis: Travel path 250 mm, rapid traverse 30 m/min, maximum acceleration 8 m/s², feed force 9,000 N Y-axis (optional): Travel path ±40 mm, rapid traverse 15 m/min, maximum acceleration 5 m/s², feed force 15,000 N Turning spindles Maximum spindle speed: up to 4,500 rpm Rated spindle speed: 2,500 rpm Spindle nose: DIN 55026-A6 Spindle bearing inner diameter: Ø120 mm Spindle power (100% duty cycle, S1): 26 kW Spindle torque (100% duty cycle): 100 Nm Equipment / Features The system includes a KUKA handheld unit, a KNOLL chip conveyor type 280 S-1/160, a DELTATHERM cooling unit type RKV 5.5, a KUKA handling robot of the Industrial Robot Cybertec-2 series with a corresponding KUKA robot control unit type KR C5 Dualcap AC, a KNOLL coolant filter unit type KF 150/950, and an air filter unit type AFS 1100.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 181174, operating hours: 5,600 h, 5 axis simultaneously and 5 axis free form - CAP Tool system! Accumulated time: Power on: 2026:04'40" Auto open: 1323:07'43" Auto cut: 669:16'50" Total cut: 5606:49'54" Total time: 2028:04'40" Bought new from Mazak factory. Excellent and working condition. Comes with different machining tools. You're welcome to test and see the machine. Year of manufacture: 10-2005 - Max. Schwingdurchmesser …………….…… Ø660 mm - Max.Bearbeitungsdurchmesser ( oberer / unterer revolver ) ………..Ø660 mm / Ø270 mm - Max. Bearbeitungslange ……………....…1016 mm - X – Achsen Verfahrweg ( oberer revolver ) ……………...………….580 mm - X2 – Achsen Verfahrweg ( unterer revolver ) …………….150 mm - Z – Achsen Verfahrweg ( oberer revolver ) …………….....…..1045 mm - Z2 – Achsen Verfahrweg ( unterer revolver ) …………….….990 mm - B – Achsen Verfahrweg ………….…………….….225° - C – Achsen Verfahrweg ………….…………….360° - Spannfuttergrose ……………... 8 “ - Hauptspindeldrehzahl ……………..….5000 o / min - Hauptspindelbohrung ……………...……………. Ø51 mm - Min. Hauptspindelindexierung ……………..………… 0.0001 ° - Spannfuttergrose 2. spindel ……………..………….. 8 “ - Drehzahl der 2. spindel …………….…5000 o / min Blodpfjd H Erysx Amnei - Verfahrweg des 2. spindelstocks ( W – Achsen ) ……………..…….. 1050 mm - Eilganggeschwindigkeit des 2. spindelstocks ( W – Achsen ) …….. 30000 mm / min - Min. Indexierung der 2. spindel …………… 0.001 ° - Revolvertyp ( oberer )…………… mit ATC - Werkzeugschafthohe ( oberer )……………..….. 25 mm - Bohrstangenschaftdurchmesser ……………..….. Ø40 mm - Revolvertyp ( unterer )…………….…… trommelrevolver mit 9 stationen - Werkzeuganzahl …………….….. 9 Werkzeuge - Werkzeugschafthohe ( unterer )…………….…….. 25 mm - Bohrstangenschaftdurchmesser …………….... Ø32 mm - Revolverschaltzeit ( unterer )……………. 0.14 s / 1 schaltschritt - Frasspindeldrehzahl …………….. 12000 o / min - Bearbeitungskapazitat der frasspindel ……………. Frasen : Ø100 mm , schaftfrasen : Ø32 mm , Bohren : Ø30 mm , Gewindebohren : M27 -: X – Achsen ( oberer ) …………… 38000 mm / min : X 2– Achsen ( unterer ) ………….…… 38000 mm / min - : Y – Achsen …………… 26000 mm / min -: Z – Achsen ( oberer ) …………….… 38000 mm / min -: Z2 – Achsen ( unterer ) ……………..… 38000 mm / min - Eilganggeschwindigkeit : C – Achsen …………….… 400 o / min - Tippvorschubgeschwindigkeit : X – Achsen ( oberer ) ……….…… 2000 mm / min - Tippvorschubgeschwindigkeit : X2 – Achsen ( unterer ) ………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Y – Achsen ( oberer ) ………….… 2000 mm / min - Tippvorschubgeschwindigkeit : Z – Achsen ( oberer ) …………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Z2 – Achsen ( oberer ) …………… 2000 mm / min - Tippvorschubgeschwindigkeit : C – Achsen …………….… 2000 ° / min - Werkzeugschaft / Werkzeugaufnahmekapazitat …………….. CAPTO C6 No 20 Werkzeuge - Max. Werkzeugdurchmesser …………….. Ø90 mm (Ø125 mm bei freien Nebenplatzen ) 300 mm / 10 kg - Werkzeugwechselzeit ( werkzeug-zu-werkzeug ) …………….. 1.3 s - Hauptspindelmotor ( 30 min -/Dauerbetrieb ) ……………..AC 22 kW / AC 15 kW - Motor der 2. spindel ( 30 min -/Dauerbetrieb ) ……………....AC 18.5 kW / AC 15 kW - Frasspindelmotor ( 20 % ED ) ……………. AC 15 kW - Kuhlmittelpumpenmotor ……………1.2 kW - Leistungsaufnahme (Dauerbetrieb ) …………….….. 66.0 kVA - Druckluftanschluss ……………..…..5 bar , 500 l / min - Kuhlmittel frassungsvermogen des Tanks ……………..….. 300 l - Maschinenhohe ……………..……..2597 mm - Aufstel

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 320 - 915 mm -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete Bjdpfezg Urlox Amnoli -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,597 h, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: Smart, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details. • Supply Voltage: 3 Phase, 400 V, 50 Hz • Control Circuit Voltage: AC100 V / DC24 V • Main Breaker Interrupting Capacity: 20 kA • Supply Voltage (Ue): 400 V, 3~ • Rated Current (Ie): 3.5 A • Frequency: 50 Hz • Weight Barfeeder: 500 kg • Breaking Capacity (Icn): 5 kA • Control: Mazatrol Smart • Turret: 12-Position • Bar Capacity: 65 mm • Hainbuch Chuck (Standard Chuck Also Included) • Optional, not included: IEMCA KID 80 Bar Feeder (2012) Bodpfxszhbqko Amneli Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar Bjdpfjvllbrox Amneli All manuals and documentation available

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, Counter spindle: 6,000 rpm, C-axis Turret: 12 stations Blsdpfx Ajzf Hqksmnji Siemens 840D Powerline Counter spindle Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: new, weight max. 1000 kg workpiece diameter Ø 80 - 700 mm table turning speeds 80 - 1600 mm/min. roll diameter Ø 250 x 50 mm voltage 230 V / 50 Hz range L-W-H 500 x 300 x 384 mm Antrieb weight 85.0 kg range L-W-H 500 x 160 x 384 mm Mitläufer Description: - Device for rotating and positioning containers and cylindrical workpieces - Unit constructed of solid steel with polyurethane-coated metal rollers - Stepless speed control with DC drive system - Rotary knob for continuously adjustable rotation speed - Switch for clockwise/counterclockwise rotation - Foot switch for start/stop, - High-frequency protection Bsdpfx Amezhcgtjneli Scope of delivery: - 1x drive unit with integrated control system - 1x rotating unit

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Bjdpfxoxmb Nwe Amneli Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Blodewhui Aspfx Amnoi Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Blsdpfewhui Njx Amnji Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Operation via special handle on the vacuum lifter. Bodpfxjzc Agde Amnsli Lifting movement is infinitely variable by frequency converter Availability: by arrangement Storage location: Hesse

Condition: new, Year of construction: 2021, - Deduster up to 160 mm Bljdpfx Aew I Uuksmnoi

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Bledowx Aadopfx Amnsi Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Bljdjx Rv Dtspfx Amnoi