Used Turning Insert for sale (9,577)

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Rodpfx Adjydl Dbsbobt Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Rsdpfx Adoydl Awobobt Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min Rjdpfx Adjydvfcsbebt tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Redpfowp E Hzjx Adbebt Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI Rodpfx Adsyf H E Nsbobt

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm Rodpfx Aoyf H Eiedbjbt spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min Redpfx Adewth Szsbobt In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Rjdpjwz Rifefx Adbobt Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2008, feed length Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, Model Year: 2008 Width: 1,150 mm Rbodpfx Adex S I Tisbet Length: 600 mm Height: 600 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (rpm): 8,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm Rbjdpfx Aeyfh R Hedbst y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 +++ Note: This machine is part of an online surplus sale! +++ Rjdpfxsx Ahg Ue Adbobt

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2017, Machine No.: 9438, Control system by Rexroth, Type: IndraControl V, Max. workpiece diameter: 250 mm, Max. workpiece length: 800 mm, Multifunction head by WMZ, Type MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. speeds: C-axis workpiece spindle: 1,000 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Max. feed rates: Z-axis 30 m/min, X-axis 60 m/min, Workpiece spindle by WMZ, Type W160A, Tailstock by WMZ ZN28-011-00K, Coolant system, Cooling unit by Rittal, Type SK3303500, Chip conveyor, Automation module by Upload, 1 lot of fixtures and accessories Rsdpfx Asx Ahk Hedbebt +++ Note: Machine is part of an online direct sale! +++

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2019, Machine no.: 2360, Control system: Rexroth, Model IndraControl V, electronic handwheel, IndraControl operator panel, Maximum workpiece diameter: 250mm, Maximum workpiece length: 800mm, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. C-axis workpiece spindle speed: 4,500 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Maximum rapid traverse: Z 30 m/min, X 60 m/min, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Workpiece spindle from WMZ, Model W160A, Tailstock from WMZ ZN28-011-00K, Coolant system, Cooling unit: Rittal, Model SK3303500, Chip conveyor, Automation module from Upload, 1 lot of chucks and accessories. Rjdpfx Adox Ahkmsbsbt +++ Note: The machine is part of an online direct sale! +++

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Rodpfsx Ahivjx Adbsbt +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Note: Machine is part of an online open sale! +++ Rodpfx Aox Ahfwedbobt

Condition: excellent (used), CATALOG NUMBER 7714 TECHNICAL DATA - Machined diameter range: 40-140mm - Minimum input material length: 750mm - Allowance for machining (on diameter): max 50mm - Cutter head drive motor: 22kW - Infinitely variable feed speed + forward/reverse - Feed motor: 2.2kW - Pneumatic cylinders: 6 pcs Sequence: - Infeed roller - 3 toothed feed rollers - 3-knife cutter head - 3 smooth outfeed rollers - Outfeed roller - Extraction port diameter: 200mm - Brake - Dimensions (L/W/H): 3300x1450x1750mm - Weight: 2100kg ADVANTAGES – Manufactured in Poland – DTR documentation Redpfx Aew Ipccsdbsbt – Used rounding machine – Excellent condition Net price: 78,900 PLN Net price: 18,780 EUR depending on the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI Redpfxsx Rkvqs Adbebt

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Okuma OSP-P200L controls Renishaw Probe Redpfxjx Ap A Dj Adbebt Chip Auger Under maintenance / parts missing Sublocation - Building 3

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Axis Travel: Z = 400 mm Y = 200 mm X = 410 mm Power / Thrust Force Z-Y: 2.5 kW / 550 daN (option with linear motor = 7.2 kW / 350 daN) X: 4.8 kW / > 550 daN Traverse Speed X-Y-Z: 40 m/min (option with linear motor = 50 m/min) Rsdpoyf Angofx Adbebt Acceleration X-Y-Z-W: 8 m/s² / 0.8 g (option with linear motor = 10.4 m/s² / 1.1 g) Resolution X-Y-Z-W: 0.0001 mm MAIN SPINDLE + C1 Power: 7.5 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm Rotational speed (turning): 72,000°/min Clamping force (turning): 4,900 N at 6 bar B AXIS (TILTING TOOL SPINDLE AXIS) Power: 4.3 kW Torque / peak: 119 / 226 Nm Angular range: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Support torque: 200 Nm TOOL SPINDLE Power: 5 kW Torque: 6 to 800 min⁻¹ Max speed: 30,000 min⁻¹ Clamping force drawbar: 2,000 N Locking torque: mechanical by straight-tooth coupling Tool shank interface: HSK 40 (A or E) Tool clamping force: 1,000 daN TOOL CHANGER Number of positions: 30 (for HSK 40) CNC control: Fanuc 30i/31i type Y Axis (cross axis) Travel: 200 mm Power: 4.8 kW Feed force: 240 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Z Axis (longitudinal axis) Travel: 400 mm Power: 7.2 kW Feed force: 360 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Includes 8 kW cooling unit and integration of an emergency stop system. Inventory no. 2220114, machine includes: CONTROL Fanuc 30i/31i, with 14” screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION With integrated indexing system (8 positions) on the tool spindle, tool changer adapted for HSK40-A, spindle speed increase to 5,500 min⁻¹ WORKPIECE RE-CLAMPING UNIT "PRM" WITH 4 POSITIONS FOR 6-SIDED MACHINING: When not in use, the unit is protected under the main spindle C1. The re-clamping unit moves on the W axis, which is parallel to axis C. Max W axis speed: 40 m/min. Travel on W axis: 310 mm. Equiped with: 2 vices – force at 5 bar: 3,500 N; 1 tailstock. SPINDLE BORE CAPACITY UPGRADE Increase from 1 to 50 mm (main spindle) TOOL MEASURING DEVICE "RENISHAW" T27 Tool length measuring for turning tools. Routine detection via M-code. Automatic tool breakage control. TOOL MAGAZINE EXTENSION Capacity increased from 30 to 60 positions COOLANT THROUGH SPINDLE 100 bar, 25 L/min, 400 L tank HP PREPARATION & ADAPTATION FOR MILLING SPINDLE Mechanical and electrical integration of turning clutch. WORKPIECE UNLOADING CONVEYOR Left side machine discharge, adjustable speeds PAPER BAND FILTRATION SYSTEM CLAMPING SYSTEM FOR F-48 COLLETS ADAPTATION FOR W-20 COLLETS PREPARATION FOR BAR FEEDER INTEGRATION Technical data provided without engagement, errors and omissions excepted.

Condition: new, Year of construction: 2024, Protec welding rotary table 20000 Kg load capacity speed infinitely variable 0,05 - 0,35 rpm Rbsdpjid Szkofx Adbot Hand remote control foot remote control extra charge 390.-€ height 700mm diameter 2000mm

Condition: excellent (used), Year of construction: 1997, CNC Lathe Spinner TC67H-MC Year of manufacture: 2002 . Tailstock . Chip conveyor . High-pressure pump . Chuck . Driven tools Technical specifications: Control: Siemens 840 D X-axis travel: 221 mm Z-axis travel: 590 mm Turning diameter: 300 mm Turning length: 600 mm Spindle speed: 4500 rpm Rbsdpsydlugsfx Adbjt

Condition: not inspected (used), CNC lathe MONFORTS Type RNC 4 Ser. No. 133/72 CNC control, SIEMENS, SINUMERIK Chip conveyor and oil mist extraction Redpfsyfnc Aex Adbjbt

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Rbodpenximujfx Adbet Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Year of construction: 1984, condition: ready for operation (used), Multi-edge lathe Rbjdpfxjmn Tpdj Adbet For 2-4-6 edge turning on turned parts . Fabr.WERA Type: Profilator RSM-150 Bj.1984 Application machine documentation Completely available.

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Rbsdpfsx D H Awjx Adbot Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN