Used Turning Rolls for sale (12,753)

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2000 Measurements depth 5100 mm Measurements height 2100 mm Machine weight 7000 kg Main Drive Spindle speed range 2800 Spindle motor power 30 kW Spindle bore 111 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 1315 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm 490 mm Workpiece X 1315 mm Ljdpfxjx D Ir Hj Aanjhr This Biglia Smart Turn 1200 was manufactured in 2008. A robust horizontal turning machine with a bar capacity of 92 mm and a maximum machining diameter of 490 mm. It features a spindle bore of 111 mm and a chuck diameter of 315 mm, powered by a 30 kW motor. Ideal for handling substantial workpieces, the machine we have for sale weighs 7000 kg. For more information about this horizontal turning machine, please reach out to us. Application Types Turning

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Ljdpfsx Ih Rtsx Aanohr Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: good (used), Year of construction: 2018, functionality: fully functional, The following are for sale here: Ljdpfx Aox Na Sleanohr 1 x MultiSwiss 16-6 from year 2018 2 x MultiSwiss 14-6 from year 2017 2 x MultiSwiss 14-6 from year 2015

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available. Lhedpfx Aaexukr Doner

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min Ljdpjx I Ir Rjfx Aanshr turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Ljdpfjw Rgcfsx Aanehr Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Year of construction: 1983, condition: ready for operation (used), General Data Machine weight 4400 kg Main Drive Number of axis 3 Lhjdpfxsx Imrco Aanor This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery Lhodpjx Ik Twefx Aansr if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Lhedpfx Aaex I Rkpsnor Descriptionis and technical details are on photos.

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Lhjdox I A Awjpfx Aanjr Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, Original purchase price of the machine was over €500,000! Turning-milling center equipped with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle nose (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Counter spindle (BigBore 77) Counter spindle speed range: 0 - 4,000 rpm Counter spindle drive power: 29 kW Counter spindle nose (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck diameter: 250 mm Counter spindle draw tube connection: M85 x 2 BMT turret (upper right) Lhjdsx Iz U Sspfx Aaner Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW EQUIPMENT Hollow clamping cylinder including draw tube Part ejector Through-spindle coolant for sub spindle Sinumerik 840D-sl/OPERATE CNC control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and counter spindle TRANSMIT Software Chip conveyor Minimum quantity lubrication Control cabinet air conditioning unit Hydraulic unit Machine lamp 230 V power socket at the operator panel 5 leveling elements Documentation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Ledjx Hxv Depfx Aanohr Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Year of construction: 2024, condition: ready for operation (used), General Data Machine weight 4200 kg Measurements height 2085 mm Movement X-Axis Movement 235 mm Z-Axis Movement 580 mm Lhedpfox Imr Njx Aanor Y-Axis Movement 105 mm B-Axis Min 580 º Main Drive Spindle Speed 4500 RPM Spindle motor power 19.95 kW Number of axis 4 Dimensions Machine Length 2790 mm This 4-axis SMEC SL 2000 BSY + WSF Joker horizontal turning machine was manufactured in 2024. It features a swing diameter over bed of 650 mm, a maximum turning diameter of 395 mm, and a maximum machining length of 450 mm. The main spindle supports a maximum bar diameter of 68 mm and achieves speeds up to 4,500 rpm. Consider the opportunity to buy this SMEC SL 2000 BSY + WSF Joker horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the Ljdpfxox Ik Tdo Aanshr scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2014, condition: good (used), functionality: fully functional, We are offering the Nutek model NTM310-CXL. This is a turning station/inverter. The PCB length can be adjusted by handwheel from 80 mm to 460 mm, and the PCB width from 75 mm to 460 mm. Removable drip tray made of stainless steel. The running direction is from left to right. The item is currently located in Satu Mare, Romania; upon purchase, the system can also be relocated to Germany. Lhsdpfx Aaexgc N Ssnsr We will be on company holiday from 19.12.2025 to 06.01.2026. From 07.01.2026, we will be available for you again.

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! Lsdpfextgkasx Aanshr - hydraulic clamping on table - tool taper for turning: KM63 - 18 000 rpm - HSK 63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm Ljdpfjr Dwpmjx Aanjhr weight of the machine ca.: 18 t Available from 01.08.2024 *

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Lhodpfxjxl Nfqo Aansr Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: good (used), Year of construction: 2003, movable headstock Lhodpfxoxp Nf Se Aanjr 10 axes Spindle speed 0 - 10,000 rpm C axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools - Drive unit 100 - 8,000 rpm for up to 4 driven tools on X2-Y2 NO front attachment SUB-SPINDLE (X4-Y4-Z4) - Spindle speed 100 - 8,000 rpm - Slide with 3 independent axes SECONDARY OPERATIONS - Turret with 7 positions (4 axial and 3 radial) - Spindle speed 100 - 10,000 rpm Part conveyor Bar feeder Robobar SBF 532

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm Ledpfxex Ik S Ts Aanjhr x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm Lhjdpfxex I Shpj Aanjr control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 2,000 rpm, turning diameter: 800 mm, turning length: 750 mm, controller model: Fanuc Oi-Td, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 800 mm Turning length: 750 mm Spindle power: 30 kW Spindle speed: 2000 rpm Turret stations: 12 positions Chuck size: 21" MACHINE DETAILS Control: Fanuc Oi-Td Machine weight: 9,800 kg EQUIPMENT Lhsdpfx Aex I Augjaner Chip conveyor

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret Lsdex Hy R Njpfx Aanshr - Knoll compact filter unit - Automatic workpiece measurement

Year of construction: 2022, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TF Main Drive Spindle speed range 5000 Movement X-Axis Movement 300 mm Z-Axis Movement 175 mm Tools Slots in storage 7 Additional Equipment LNS Bar Loader 3m This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information. Application Types Turning Ledpfx Aox D Nptoanjhr

Condition: good (used), Year of construction: 2001, movable headstock 10 axes Spindle speed 8,000 rpm C-axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools - Drive unit 8,000 rpm for up to 4 driven tools on X2-Y2 FRONT UNIT (X3-Z3) - Cross slide with 4 positions SUB-SPINDLE (X4-Y4-Z4) - Speed 6,000 rpm - Slide with 3 independent axes SUB OPERATIONS - Holder with 7 positions (4 end and 3 cross) Lhsdsw Exk Sspfx Aanor Workpiece feeder Coolant pump 20 bar KNOLL chip conveyor Bar feeder ROBOBAR 532, 3m bars