Used Turning Rolls for sale (14,642)

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning/milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approximately 9,000 machining hours! Travel distances: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Features and equipment: - Tool turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Main electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling system installed Kwjdpexzqhrefx Abcjw - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - In-machine tool measurement - Manual measuring arm for sub spindle - Short bar loader, Make: LNS Quick Load Servo III - Including tooling: 8 fixed tools, 3 driven tools included - Including extraction unit, Make: Indusa - Complete documentation included Machine is available immediately! The machine has been fully cleaned and inspected! We will take care of loading! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Kwjdpfx Absxzq Ncjcsw Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Kwodpfxoyvy Uto Abcsw Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: new, AUMA 07.1-F10 Multi-turn actuator New -Auftragsnr: 23078028 -NR: 2218NS66675 -PTB 01 ATEX 1119 -SKE0 56-2/80 Kodpfsv Uaicsx Abcsww -Art nr: Z048.703 - AZ F-3-S-ISO-STD

Condition: used, functionality: fully functional, Year of construction: 2006, roller (top) diameter: 420 mm, roller length: 3,000 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, number of digital displays: 1, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, swiveling upper roller, We are offering this used Birlik sheet metal rolling machine, year of manufacture 2006. Kwodpfeyu Tm Sox Abcjw If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2015, condition: good (used), Carl Wezel Cold Rolling Mill BW500/420 – Refurbished Strip Rolling Mill Kwsdpoyvgi Sofx Abcjw Carl Wezel Cold Rolling Mill BW500/420, refurbished strip rolling mill Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Model: BW500/420 Year of manufacture: 1975 Machine type: Cold rolling mill / Strip rolling mill Modernisation: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel rolling mill Year of modernisation: 2015 Operating voltage: 3AC 400 V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24 V

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm Kwjdpjyuy Enjfx Abcsw 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: good (used), Year of construction: 2012, operating hours: 22,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Brand: STAR Kjdpfxsyu Uhws Abcjww Model: SR-32J Year: 2012 with: FANUC 32i control Backworking unit Synchronous spindle Driven tools C-axis Oil mist extraction system Fire suppression system FMB TURBO 3-36 bar feeder

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 10400 € 199.68 € 20000 kg 10000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request. Kwodpfxsx Urrns Abcsw

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 8700 € 167.91 € 10000 kg 5000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, Kwsdpfx Asx Urrbsbcjw due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 16000 € 307.2 € 20000 kg 10000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, Kodpfjx Urq Rjx Abcoww with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, neu Kodpox Urp Tsfx Abcoww ca. 3-6 Wochen ab Auftrag Türkei 13200 € 253.44 € 10000 kg 5000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: good (used), Year of construction: 2013, operating hours: 35,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type lathe Make: STAR Model: SV-32 Year: 11/2013 with: FANUC 16i TB control backside machining synchronous spindle turret driven tools C-axis high-pressure pump fire extinguishing system chip conveyor Kodpfeyu Nqyex Abceww bar feeder magazine FMB TURBO 3-36

Condition: used, mileage: 51,050 km, first registration: 06/2021, color: white, IVECO 120E25, Year 2021, white color, Euro 6, Wheelbase 3105 mm, 51,050 km, ZF 9-speed manual gearbox, air conditioning, front and rear leaf spring suspension, equipped with new MEC 12-ton hook-lift system, with tilting, vertical roller, hydraulic box locking, hydraulic system for crane body. Kedpfxjxlc I Ss Abceww

Condition: used, Year of construction: 2018, controller manufacturer: Fanuc, controller model: 31i-B5, _____ Description: Year of manuf. : 2018 Control : Fanuc 31i-B5 Turning diam. : 500 mm Kwjdpfx Aeyul E Hebcjw Turning length : 1280 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:94 mm Workpiececlampig:3-Jawchuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):40 kW Torque (max.):286 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok HFK-N-210-52-3 Movement in W:1.130 mm Toolcarrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:10.000 rpm Power (max.):20 kW Torque (max.):110 Nm Taper:HSK-A63 Swivelrange in B:+/- 105° In general: Toolmagazine:Chainmagazine, 40 Stations Movement in X/Y/Z:515/210/1.360 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolantmanagement:Internal coolant unit with Paperbeltfilter and Highpressure, 70 bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 :Rawmaterialfeeed. Interface Barloader prepared Finished part removal:Interface Partscatcher prepared Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used Toolholder HSK-A63 Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2013, controller manufacturer: Fanuc, controller model: 31i-B5, _____ Kjdpfoyul Disx Abceww Description: Year of manuf. : 2013 Control : Fanuc 31i-B5 Turning diam. : 500 mm Turning length : 1280 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:94 mm Workpiececlampig:3-Jawchuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):40 kW Torque (max.):286 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 210BB Movement in W:1.130 mm Toolcarrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:10.000 rpm Power (max.):20 kW Torque (max.):110 Nm Taper:HSK-A63 Swivelrange in B:+/- 105° In general: Toolmagazine:Chainmagazine, 40 Stations Movement in X/Y/Z:515/210/1.360 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolantmanagement:Internal coolant pump with Filter and High-pressure, 20 bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 Rawmaterialfeeed:Barloader, Breuning Irco ILS-RBK 10016 Finished part removal:Interface Partscatcher prepared Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used Toolholder HSK-A63 Further Equipment:Rinsing pistol

Condition: excellent (used), Year of construction: 1986, Max. turning diameter over bed: 300mm Max. turning diameter over rear slide: 250mm Max. turning length: 630mm Distance between centers: 1000mm Kwjdpfx Ajyt Spvjbcjw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Kedpfxsyuq Dzs Abceww Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2008, operating hours: 3,858 h, CNC controller: MSX-850III X-axis travel mm: 260 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 275 Upper turret Ksdpfjyuy H Sjx Abcoww Number of tool slots St .: 12 Main spindle Speed ​​spindle rpm: 4000

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Kwodpevh I Tvsfx Abcow Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Kodpfoxghngjx Abceww Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg Kwsdpfx Abjx D Nfujcow This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2006, operating hours: 65,945 h, condition: ready for operation (used), General Data Machine weight 2500 kg Kedpfx Asx D Nh Nsbcsww Control Unit Brand FANUC Main Drive Spindle speed range 4500 rpm Spindle motor power 7.5 kW This Takamaz X-100 was manufactured in 2006. A robust horizontal turning machine featuring a max turning diameter of 203 mm, spindle speed up to 4500 rpm, and a chuck diameter of 153 mm. Weighing 2500 kg, it underwent a spindle and ball screws overhaul in 2021. If you are looking to get high quality turning capabilities consider the Takamaz X-100 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 1780 mm Measurements depth 2765 mm Measurements height 1840 mm Machine weight 5100 kg Control Unit Kwjdpfx Absx D Rmtocow Brand MAZATROL Main Drive Spindle speed range 5000 Spindle motor power 26 kW Number of axis 3 Movement X-Axis Movement 230 mm Z-Axis Movement 575 mm Turret Number of turrets 1 Tools Number of station 12 This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), General Data Machine weight 3300 kg Control Unit Brand FANUC Model Series 21i-TB Main Drive Number of axis 2 Movement X-Axis Movement 185 mm Kwsdpfxsx D R Sps Abcsw Z-Axis Movement 370 mm This Takisawa TC 200 was manufactured in 2005. It features a standard turning diameter of 225 mm and a maximum of 340 mm. With X-axis movement of 185 mm and Z-axis movement of 370 mm, it also includes a 12-position turret. Consider the opportunity to buy this Takisawa TC 200 horizontal turning machine. Contact us for more information. Application Types Turning