Used Turret Winder for sale (1,997)

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Itedoxaigqepfx Abcod

Condition: used, mileage: 32,468 km, power: 177 kW (240.65 HP), first registration: 11/1996, overall weight: 13,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, parking heater, MB 1224 SK with short double cab in exceptionally good condition from the Technical Relief Agency (THW) Itedpfxexvgdxe Abcod 7 seats with 3-point seat belts, 5t hydraulic winch (rear extension up to 10t), pneumatically assisted clutch actuation – very comfortable. Center and rear axle differential locks, transfer case with off-road reduction. Towing hitch with ring eye, trailer load up to 18t with continuous brake system. Wheelbase (axle spacing) 4,000 mm – possible body length approx. 4,500 mm. Thanks to its 6-cylinder turbo engine with 6-speed gearbox, the truck runs excellently and pleasantly quiet – even at higher speeds. Top speed Vmax = 92 km/h according to papers, 100 km/h according to speedometer. Both starter batteries are new – ready for immediate operation – TÜV (main/ emissions test) will be renewed. An air parking heater is installed in the cabin – it works. Recently serviced, including check of all fluid levels and central lubrication system. Both fuel filters, air dryer cartridge, and wiper blades have been replaced. The cab and superstructure have been professionally refurbished in our own body shop and then partially repainted. The cab had paint flaking on the roof. This was completely sanded down and professionally repainted with the correct paint build-up. The chassis was also reconditioned and professionally repainted in black. Due to the short double cab, it is also suitable as a base for an expedition vehicle. Dimensions: Body: 3,870 x 2,500 x 1,600 mm (LxWxH) Cab rear: 1,400 x 2,100 x 1,520 mm (LxWxH) Main frame width (external): 92 mm +++ Errors, changes and prior sale reserved

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm Itsdpfx Absxu Nnwjcjd * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04090810, Equipment: type plate available, AutoTurret ABG Vectra+ slitter Ashe. Width 410mm. Slitting 25, 41, 76mm. Automatic roll ejection. Glueless. Good condition. Magnetic cylinders: 96, 99, 102, 104, 108, 110, 111, 114, 116, 120, 124, 130, 131, 135, 136, 138, 140, 141, 144, 147, 151, 154, 156, 167, 168, 180, 185 Iodpfx Abswyvf Ascotd

Condition: used, GEWINDEROLLMASCHINEN VEB WMW Itodpfxeig Txme Abcsd GWR 80GR WITH A LOT OF TOOLS

Condition: good (used), Year of construction: 2005, Printing width: 1050 mm Material width: 1100 mm Print repeat: 350 – 750 mm Isdpfxeymdato Abcotd Mechanical speed: up to 400 m/min Materials: PE, PP, OPP, PET, Paper Unwinder: • Turret unwinder, non-stop • Max. roll diameter: 1000 mm • Expanding shafts: 3”, 5” Winder: • Double unwinding shaft with dancing rollers • Max. roll diameter: 1000 mm • Expanding shafts: 3”, 5” Drying System: • Gas drying Inking System: • 10 pneumatic pumps Control & Equipment: • Motorized longitudinal register • Doctor blade system • Video system: BST • Web guides before CI and before winder • Dancing rollers system • New BST IPQ print control/view system (installed 2023) Retrofit (2022): • Main OCS computer replaced • Valve island for CI replaced • Valve island for winder and rewinder replaced

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Itjdpfspy Eufox Abced

Condition: good (used), working width: 850 mm, total width: 4,500 mm, total length: 14,300 mm, total height: 4,200 mm, overall weight: 10,000 kg, Equipment: CE marking, Coating and laminating line for the production of multilayer materials such as BOPP, PET, CPP, paper, and aluminum foil. Equipped with double turret unwinders and winder, coating unit, laminating unit, and electric dryers. Full specification available in the photos. Iedpfsyfuhlox Abcjtd

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame Itjdpswq Ay Isfx Abcjd MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Itedpfxorn Sqhj Abcjd Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: excellent (used), Year of construction: 2011, The electricity and gas operated system enables surface treatment of plastic films by flame treatment. Field of application: e.g. Reverse foils in the solar industry MAIN COMPONENTS • PSA turning roll and turret winder 2200/12 PSA W / ARW 2200/12 - Fyling Splice Iodpfx Ajvydy Nsbcetd • Hill/Jungwirth burner unit for gas/air mixture • Suction • Erhardt + Leimer web edge control • Detect the OCS camera system for the error • Semket labeling system to identify the errors • GWK temperature control units for roller cooling SKL SP HC300 330KW

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Itsdpfxeyn Nybs Abcod Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Itsdpfxjypdw Dj Abced Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Iodpfx Ajyqx Ugobcjtd Total power: 1.5 kW EQUIPMENT CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. External reference: 6724

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, bar passage: 32 mm, The following work has been carried out on the machine in recent years: June 2023 – Counter spindle motor replaced July 2023 – Counter spindle tachometer replaced November 2023 – Ti axis cable replaced November 2023 – Ti axis motor replaced June 2024 – Hard drive replaced July 2024 – complete NC TECHNICAL DETAILS Iodpfjyux I Ijx Abcjtd Bar capacity: 32 mm EQUIPMENT 10 tool stations on turret with Y-axis for front and rear machining 5 gang tool positions 3 tool stations on drilling block for rear machining 4 driven tools for cross machining C-axis main spindle Milling interpolation Cutting radius compensation Synchronous tapping ER16 tool holders

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TAKISAWA EX-122 CNC LATHE Category: CNC Turning Centers Reference No.: 311121 Capacity: Ø610 X 1524 MM Year of Construction: 2007 Technical Specification: CNC Control : Fanuc 21iT Isdjx Ehhdjpfx Abcotd WORKING CAPACITY Max Turning Diameter : 610 mm Max Turning Length : 1524 mm Swing : 910 mm Guideways : LM TURRET Turret : 10 Stations TAILSTOCK Tailstock : MT5 SPINDLE Max Rotation Speed : 1200 RPM Spindle Nose : A2-15 Spindle Bore : 200 mm Spindle Type : Gear Driven

Condition: used, Year of construction: 2008, CNC lathe BIGLIA B658YS with Y-axis and sub-spindle CNC: FANUC 18iTB with Manual Guide Maximum turning diameter: 410 mm Bar working diameter: 80 mm Isdpfx Aoyvuaqjbcotd Spindle nose: ASA 8″ Max spindle speed: 3500 rpm Main spindle motor power: 22 kW Sub-spindle ASA 5″ Bar working diameter: 55 mm Max spindle speed: 5000 rpm Sub-spindle motor power: 18 kW Axis travels: Z-axis travel: 670 mm X-axis travel: 255 mm Y-axis travel: 110 mm (+60 / -50) B-axis travel: 660 mm Turret: Number of tool stations: 12 Number of driven tool stations: 12 Driven tool motor power: 5.5 kW Max driven tool speed: 4000 rpm - Prepared for bar feeder - Documentation included - Tool probe - Parts catcher - Chip conveyor with tank and pump - 3 driven toolholders - 9 static toolholders

Condition: used, Year of construction: 2005, MAZAK QT6 year 2005 Kitagawa B205 chuck 8-position turret spindle bore 32 mm max diameter 130 mm max turning length 195 mm included with the machine: documentation chip conveyor Iedpfeyvr Hzex Abcotd sump with pump

Condition: good (used), Year of construction: 2007, In good technical condition. Year of manufacture: 2007. Max. turning length: 406 mm. Max. turning diameter: 173 mm. Spindle diameter: 44 mm. Number of tools on turret: 12. Adjustable spindle speed: 6000 rpm. Iodpfxoyvr D Hj Abcotd

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Itodpfx Aov Tb Hgsbcjd Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2011, CNC lathe Mori Seiki SL403B/800, year of manufacture 2011, Japan 2 axes - X axis 345 mm - Z axis 995 mm max spindle speed 2000 rpm Fanuc mapps MSX 500-IV control 18" Kitagawa B-18 (450 mm) chuck turning diameter 620 mm max turning length 958 mm Itedpfoyffctsx Abced 12-position turret tailstock chip conveyor Renishaw probing system.

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Itjdpoxppnmefx Abcjd Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW Itjdpfxsyvlxqs Abcsd TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Itodpfjv Drigex Abcjd Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: new, Year of construction: 2026, CLSM 2100×60 Sheet Straightening and Stress Relieving Machine The CLSM 2100×60 Sheet Straightening Machine is an industrial sheet flattening and stress-relieving machine designed to eliminate deformations and internal stresses that occur in sheet material after laser cutting, plasma cutting, and punching operations. In sheet processing and metal fabrication, stresses that develop after laser cutting or punching can negatively impact production quality. Sheet straightening machines eliminate such deformations, ensuring parts are perfectly flat and stress-free once again. The CLSM 2100×60 Sheet Straightening Machine delivers high-precision sheet flattening thanks to its heavy-duty steel frame, servo-hydraulic adjustment system, and precision-calibrated straightening rolls. Developed by CRONOSSTECH, this machine is the ideal solution for eliminating deformations that occur post-laser cutting. Key Advantages • Heavy-duty steel frame with high rigidity • Servo-hydraulic precision gap adjustment system • 19 hardened straightening rolls • High stability with 233 support rollers • European-origin hydraulic and electrical components • 0.01 mm adjustment precision • Sheet straightening after laser cutting • High production repeatability • Durable industrial design Applications • Sheet straightening after laser cutting • Elimination of deformations after punch and turret punch operations • Sheet processing centers • Metal service centers • Steel service centers • Sheet fabrication plants • Automotive and sub-industry manufacturing Standard Features • Programmable control unit • Servo-hydraulic gap adjustment system Isdjytb Rvspfx Abcjtd • 19 straightening rolls • Hardened and ground rollers • European-origin hydraulic system • Inverter-controlled drive system • Digital encoder measurement system • Overload protection system • High-strength shaft and drive system • Remote technical support infrastructure Technical Specifications Model: CLSM 2100 × 60 Straightening Width: 2100 mm Minimum Sheet Width: 100 mm Material Thickness: 1 – 15 mm Straightening Speed: 2.5 – 5.4 m/min Number of Rolls: 19 (10 lower / 9 upper) Roll Diameter: Ø60 mm Roll Material: 4140 grade steel / spring steel Roll Hardness: 60 – 62 HRC Support Rollers: 233 units Gap Adjustment: Servo-hydraulic system Adjustment Precision: 0.01 mm Measurement System: Digital encoder Drive System: Gear motor + inverter Total Motor Power: 15 kW + 7.5 kW Machine Dimensions: 4500 × 2350 × 2500 mm Machine Weight: ≈ 21,200 kg Production Note This machine is manufactured by CRONOSSTECH in Turkey. It is engineered for high durability and long service life in industrial production environments.