Used Twin Shaft Shredder for sale (10,723)

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic Kedpebq Su Njfx Adbsnd hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Kjdpeu Thabsfx Adbsnd Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, overall weight: 2,000 kg, filling opening length: 600 mm, filling opening width: 700 mm, type of input current: three-phase, Weima ZM 30 S Shredder Motor power: 2 x 18.5 kW! Chamber dimensions approx. 600/700 mm. Screen. Weight approx. 2000 kg. Additional second set of knives included. Price on request. Kjdpfjxlk T Aex Adbjnd More photos and a working video available upon request. Testing can be arranged. For more information, please call.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 10791/89, overall weight: 2,500 kg, rotor diameter: 235 mm, number of blades: 27, total length: 2,550 mm, total height: 1,350 mm, control cabinet length: 300 mm, control cabinet width: 800 mm, control cabinet height: 1,200 mm, total width: 1,900 mm, rotor length: 1,050 mm, rotor width: 235 mm, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 120 rpm, hopper volume: 2 l, rotational speed (min.): 120 rpm, rotor flight circle: 235 mm, filling opening width: 1,200 mm, filling opening length: 1,050 mm, ejection height: 500 mm, year of last overhaul: 2025, working width: 1,050 mm, sieve perforation: 25 mm, warranty duration: 6 months, input voltage: 400 V, torque: 10,000 Nm, blade width: 40 mm, Equipment: CE marking, Intake length: 1200 mm intake width & rotor length: 1050 mm ᴓ rotor: 235 mm nº de cutters: 27 un (40x40 mm) rotor speed: 120 rpm Motor: 18,5 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm - other sizes available Machine weight: 2500 kg Knsdpfxsxrzzqs Adbsd Machine fully revised; including all wear parts new Scope of supply includes: - Infeed funnel - Steel support - Electric control pannel - Wiring between shredder and electrical cabinet

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Kodpfx Adowxmb Eobjnd Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE Kjdpfx Aoxmvp Ssdbend - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Complete machine with control cabinet and hydraulic unit. The machine is dismantled. Preferred contact: WhatsApp. Knjdpoxfu N Iofx Adbjd

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. Knjdpfx Aoxp Nm Njdbjd All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle.

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 750 mm, Untha RS 50 Shredder Power: 2 x 22 kW / 380 V 50 Hz Electrical cabinet – Siemens S7 Chamber dimensions: 700/750 mm Knjdpfx Asxlgqwodbod Quick-change screen system. Weight approx. 3,500 kg. New knives. Machine in perfect condition. Price on request. More photos and a video of the machine in operation available upon request. Possibility to conduct tests. For more information, please call.

Year of construction: 2024, condition: new, max. cutting height 200 mm max. cutting width 400 mm max. passage width 490 mm feed rate 5-30 m/min. sawing motors 2x 37 kW ( also more KW possible ) feed motor 2,2 kW saw shaft diameter 70 mm saw blade diameter 325 mm weight 2.800 kg Basic equipment Electrical height adjustment of the upper rollers Kodpfxeu I Duj Adbjnd Special equipment Laser with adjustment device Driven roller gear Electronic braking device

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Kodpfx Adowtbyxobsnd Counter knife: yes Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: refurbished (used), Year of construction: 2009, Stationary single-shaft shredder Doppstadt DW2560E 1 Buffalo - Year of construction 2009 - Electric motor 315kW - Central lubrication - Control cabinet - remote control Knsdpfx Adsxmvpfebsd - Weight 26500Kg Machine is completely overhauled

Condition: used, Year of construction: 2022, operating hours: 250 h, functionality: fully functional, machine/vehicle number: P3SRU02, total length: 9,111 mm, total width: 2,060 mm, total height: 3,347 mm, overall weight: 14,500 kg, hopper volume: 2,300 l, rotational speed (max.): 45 rpm, torque: 1,80,000 Nm, power: 129 kW (175.39 HP), The P3 tracked shredder is a compact and highly efficient two-shaft shredder which can be used in numerous applications from waste wood processing to construction waste. - Heavy duty full metal shafts which are easy to replace - Tiltable loading platform to feed the shredder - Easy service and maintenance access - More torque - Volvo Penta TAD581VE, 129kW at 2300 rpm engine - Equipped with wood & green waste shafts - Grid 100 x 120 Kjdpfx Adexphy Ujbsnd Machine is located currently in SPAIN

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. Kjdpfogwcfzsx Adbsnd 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: new, Year of construction: 2024, Shredder machine is only braek the materils. You will crush thick cables to 6 - 8 - 10 cm so the capacity will increase and the machine will work easily. You can break with 30-40-50 mm before crush breaking machine. Knsdjtu Hntopfx Adbsd Only shredding is done with the shredder machine. When you throw the cables, when you shrink them to 30-40-50 mm and then throw them into the MLK 103-120 Machine, you both work more efficiently and increase the capacity and at the same time extend the life of the blades.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF Kodpfx Aexlm Trsdbjnd This machine is still in operation and will be available on October 20th. For more information, please contact us.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Knedpsv S Hyvjfx Adbsd Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, Year of construction: 2000, operating hours: 15,036 h, Machine is available immediately, if you are interested please contact us and arrange a viewing appointment Knsdpfev Incdjx Adbjd

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Kedpfx Adsxiu Dmjbend Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 160 = 320kW 2. Machine Weight: 38.000 kg 3. Shredding Capacity : up to 6 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material DIN 1.2746 Dimension : 105x105x49 mm . Blades are easy to replace. 5. Loading Chamber Dimensions: 2200 mm x 4500 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The loading of the shredder can be done by grape or conveyors 11. A Hydraulic Oil cooling system is implemented. Knodpfxsvtw Iyj Adbod 12. Rotor work at 20-30 rpm. 13. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 14. All electrical parts will be SCHNEIDER and SIEMENS brands. 15. The machine is fully automatic with SIEMENS PLC control. 16. • The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health or environmental requirements. 17. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled) Knedpfx Asw U Tqdodbod

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Kjdpfxewtbyrj Adbsnd Scraper comb: yes Counter knife: yes Hydraulic unit: complete Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: new, Year of construction: 2025, 1. Electric Motors Total Power: 360 kW 2. Machine Weight: 44.000 kg 3. Shredding Capacity: 10 - 15 tons/h (Iron & Steel) 4. Blade Quantity: 78, Blade Thickness: 150 mm. 5. Loading Chamber Dimensions: 2350 x 4085 mm Ksdpfxodfc Uzo Adbend 6. Shredding Chamber Dimensions: 1500 x 2000 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4,5 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under Aymas Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Ksdpjw Tk Udjfx Adbond Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 180 kW 2. Machine Weight: 20.000 kg 3. Shredding Capacity: 10 t/h (Steel) 15 t/h (Copper) 4. Blade Quantity: 90, Blade Thickness: 100 mm. 5. Loading Chamber Dimensions: 1.600 mm x 2.400 mm 6. Shredding Chamber Dimensions: 1.000 mm x 1.600 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. Kjdpfogwcc Ajx Adbend 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.