Used Universal Milling Head for sale (18,598)

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition Dodjw A Af Iopfx Adtock

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Dcsdpfx Aoty A Ehedtsk Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition Dcsdpfjr D T U Djx Adtjk

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Dedpfxsznvmye Adtjck Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain TNC 426 rapid traverse 10 m/min table dimensions 1.200 x 550 mm Dcsdpfx Ajy Dh U Djdtsk spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th axis Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1989, Technical details: x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm spindle taper ISO: 40 milling head speed: 25 - 4200 U/min table surface area: 560 x 1200 mm Dedpfezn N Rxsx Adteck total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4,3 x 4,4 x 2,3 m with CNC HEIDENHAIN TNC 415 *

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 850 mm Djdpfoy Ty R Aex Adtsck z-travel 800 mm Control Heidenhain MillPlus

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the Dcodpfx Ajzmn Ruedtsk technical data and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2010, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, quill stroke: 105 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, table length: 1,400 mm, table width: 400 mm, total height: 2,150 mm, total length: 2,300 mm, total width: 1,800 mm, overall weight: 3,600 kg, table load: 400 kg, Universal Milling Machine, capacity Ø 80 mm, swiveling head +/- 30, feed range X/Y/Z 1000/400/500 mm, table size 1400x400 mm, motor 7,5 KW, speeds 40-1800 rpm. stepless, ISO 50, quill travel 105 mm, depth 510 mm, digital readout on 3 axis, automatic and rapid feeds, coolant system, dimensions 2300x1800x2150 mm, weight ca. 3600 kg; accessoires into cabinet Dedpfxeyzacbo Adtjck

Year of construction: 1989, condition: ready for operation (used), X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clamping devices, a three-jaw chuck with clamping ring and documentation. The screen has burn-in marks but is still readable. An on-site inspection is possible. Dsdpjzrn Ikjfx Adtock

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dedozman Eopfx Adteck Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Dcjdpfxezmhlfj Adtsk Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vice.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Dcodpfx Adszrbvnjtok Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Dedpezrbu Dsfx Adtock Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2102-2821, Offer 26207 Technical data: - Machine originates from the Weser Ems vocational training center and underwent a complete overhaul at - FPS Werkzeugmaschinen GmbH in Warngau in 2015-2016. - Table size 600 x 220 mm - Working range of the axes: - X (longitudinal) 300 mm - Y (transverse) 340 mm - Z (vertical) 150 mm - Distance between table axis and stand 655 mm - Tool holder ISA 40 - 16 working spindle speeds 40 - 2000 rpm - Feed rates X - Y - Z axes 10 - 500 mm/min - Rapid traverse 1200 mm/min - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 650 x H 1600 x D 1000 mm - Weight approx. 600 kg - Including: Dcedpfjzrfifex Adtsk - Positioning control with Active digital display - Adjustable vertical milling head with drilling spindle - Central lubrication system - Fixed angular table - Collet set, various holders + milling cutters - Rotary table - Drawer cabinet with drawers on roller bearings

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Condition: Like new. Dsdpfxozq Hzyj Adteck

Year of construction: 1994, condition: excellent (used), Dear customers, we are currently offering a universal milling machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of the machine: Work table: 750 x 500 mm Longitudinal travel: 810 mm Transverse travel: 315 mm Milling height: 0 - 470 mm T-slots: 6 x 14 mm Spindle speeds: 56 - 4,500 rpm Tool holder: ISO40 / SK40 - Digital display with Heidenhain scales - Motorized vertical adjustment of the table Space requirement: 2,000 x 2,500 x 2,400 mm Weight: 2,400 kg !! Condition and scope: see pictures !! Dcedpozlibfefx Adtek Price plus VAT, which will be shown separately on the invoice. Worldwide transport is possible for an additional fee! If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2016, x-travel 560 mm y-travel 320 mm z-travel 400 mm turning speeds 25 - 2000 U/min turning speeds 18 Stufen spindle taper ISO 40 SK quill stroke 100 mm table: 320x1000 / 450x950 mm table load 125 kg feed range 5 - 600 mm/min feed 18 Stufen rapid traverse 1200 mm/min total power requirement 5,4 kW weight of the machine ca. 1780 kg. range L-W-H 1800 x 1500 x 1780 mm From a training workshop - good condition (!!) Commissioned in April 2017 Features: Dodpfx Ajzmanxjdteck - 3-axis digital display - Ball screws on the X and Y axes - Rapid traverse in all 3 directions - Electromagnetic brake for spindle stopping - Coolant system - Chip tray - Vertical milling head with quill adjustment * Milling head rotation 90° * ISO 40 tool holder - Fixed box table 950 x 450 mm * Number/size of T-slots: 7 / 14.0 mm * T-slot spacing: 63 mm * Minimum distance between base table and spindle axis: 163 mm - Machine light - Slatted guard on the vertical column guide - Operatorâ??s manual

Condition: used, Year of construction: 1970, x-travel 3000 mm Dcedoyqu Rqjpfx Adtjk y-travel 1350 mm z-travel 1400 mm spindle taper ISO 50 turning speeds 22-1400 U/min Rotary table 800x600 mm Table dimensions 2500x1200 mm Feed 5-3000 mm/min ball screw The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, travel -x axis 2.100 mm travel -z axis 1.400 mm travel -y axis 1.200 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 92 tool taper SK 50 BIG PLUS max. tool length 600 mm max. tool diameter 250 mm max. tool weight 20 kg rotary table dia. 1.700 mm max. swing dia. 1.800 mm total connected load 100 A 5-axis simultaneous machining center | REIDEN - BFR-22 equipped with 2-axis swivel head (A+B), NC - rotary table, 92-way tool changer, double gripper, ITC and chip conveyor. Scope of delivery: Dodpfx Adozlkwzotjck - probing system The machine has been regularly maintained by the REIDEN factory service team. In recent years, extensive repairs have been carried out and numerous wear parts have been replaced, including a complete overhaul of the milling head with a new intermediate shaft and bearings, as well as various electrical components. As a result, the machine is in a technically well-maintained and fully operational condition. It can be inspected under power upon request. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BFR 22 | BFR22

Condition: used, Year of construction: 2010, x-travel 400 mm y-travel 300 mm z-travel 400 mm total power requirement 3,6 kW weight of the machine ca. 1,3 t Dcedpev T Np Nefx Adtok

Condition: used, Year of construction: 1965, x-travel 1000 mm y-travel 600 mm Dsdpewqrw Nsfx Adtsck total power requirement 2,5 kW

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm Dcedot Hxbwjpfx Adtsk z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Dodpfov Td Eljx Adtjck Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: excellent (used), Year of construction: 1983, x-travel 450 mm y-travel 200 mm z-travel 465 mm total power requirement 2,6 kW Dcedpfx Asxdnpljdtok weight of the machine ca. 1.2 t