Used Universal Table for sale (38,775)

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Lajdpfxsup Aape Aanjk Table size: 1400x380mm / side Cas27Wn8Iy Load capacity: 15000 kg Turning load capacity: 7000 kg

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Ledpjxz E Exjfx Aansak *

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each Ljdpfx Aaoxy Stysneak - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: good (used), functionality: fully functional, Universal table for DECKEL ; FP - Milling machines . Dimensions : 80 x 240 cm . Lodpfxsxw Nnvj Aanoak

Year of construction: 2000, condition: used, table clamping surface: 800 x 425 mm 6 T-slots 14-H7, slot width: 63 mm table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Table top rotation range 360°, resolution: 0,001°. max. workpiece weight: 300 kg Lasdsb N Acmspfx Aanjk Dead weight: 340 kg

Year of construction: 1988, condition: used, table diameter 400 mm Ljdpfeipyx Njx Aanjak table load 0,126 t table height 100 mm weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 1985, Universal turn & tilt table from MAHO 800 with mechanical y-adjustment via hand wheel Lasdjb I Irwspfx Aansk

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Laodju N D S Uepfx Aansk Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Laodpfxsxcilrj Aanek

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm Laodpexvxfhefx Aanok 8 T-slots See photos for condition

Condition: like new (used), Universal milling table is in very good condition. Laedpfx Aehtyxwjanjk

Condition: good (used), Type / Model: Rotating-Tilt-Swivel Table Type Designation: 2038 Laodpfjvzlibjx Aanjk Number: 500 - 0252 Table Top: 700 x 430 mm Clamping Surface: 700 x 430 mm Stop Surface: 580/500 x 250 mm Slot Width: 14 / 24 mm Slot Depth: 14 / 24 mm Number of Slots: 5 Features: Rotating, Tilting, and Swiveling Condition: Good Weight: 230 kg Dimensions: 700 x 600 x 600 mm

Year of construction: 2023, condition: as good as new (ex-display), - Demonstration machine in mint condition- - 180° swivel head for rounding and deburring - Ergonomic working - Uniform rounding - Processing of small parts possible Lajdsflvc Hjpfx Aanok - anti-slip mat

Condition: excellent (used), -COM 783- A stable universal precision T-slot table with horizontal mounting surface for smaller machine milling machines is offered here. The machine table is made of solid machine casting Lsdpfx Aod Sf Imoanjak Dimensions Table: (l x w ) 800 x 325mm Clamping area: 725 x 260mm Screw-on surface: 520 x 160mm (middle distance of the screw-on grooves approx. 50mm) Slots: 4 pieces longitudinally- running T- slots DIN 650 Nominal size 14 x 25

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine Lsdsgp T D Nopfx Aanjak table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Lodpfod E A I Nox Aansak Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,345L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection / CSC valid until: 04-2028 = Further Information = General Information Year of manufacture: Dec. 1998 Model year: 1998 Weights Unladen weight: 4,250 kg Payload: 31,750 kg Gross weight: 36,000 kg Functional Load compartment dimensions: 715 x 255 x 267 cm Load compartment capacity: 31,122 l Superstructure brand: UBH Universal Bulk Handling Lsdpfsxvyc Iox Aanoak Number of chambers: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), stable angle table, used Laodew Rnziepfx Aanjk Clamping surface 800 x 360 mm 5 T-slots Distance = 65 mm

Condition: used, Year of construction: 2020, The UR5 robot is a 6-axis robot arm, it has a payload of 5 kg and a reach of 850 mm Laodpfx Aajwdl Rpsnjk 4 units of UR5 collaborative robots are currently available for purchase. Prior to shipment, each unit will undergo thorough testing, cleaning, and professional packaging to ensure optimal condition upon arrival.

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Ledpfxoxtwxue Aanjak

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Ledpfx Aajvkt N Usnjak Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 28900 kg Main Drive Number of axis 6 This 6-axis Universal Robots ur10 cb3.1 was manufactured in 2018, featuring a payload capacity of 10 kg and a reach of 1300 mm. It includes a control cabinet with dimensions 475x423x268 mm, supports TCP/IP communication, and operates with a power consumption of approximately 350 W. Ideal for tasks requiring precision and flexibility. Contact us for more information about this machine. Lodpfx Aasx I S Sbjnjak Application Types Robotics

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Laodpfx Aovuk Uijansk

Condition: good (used), Here we offer you a used shelf connector for sale. Included in delivery: 01x shelf connectors usedMaterial colour: sendzimir galvanizedShelf spacing: approx. 150 mmProfile: approx. 35 x 25 mmWeight/piece: approx. 0.214 kg /piece 02x hexagon bolts, M10 x 3502x hexagon nut, M1002x washers, M10 Laodpfed Tyhvox Aanek

Condition: used, Year of construction: 2011, 2 machines available in working condition!  Machine still in operation and will be available April/March time. Possible for video demo! Lodpfx Aaox I Na Aonsak Whats included: Double 8mm 83pcs, Double 8mm 13’’ 20psc, 12mm 48pcs, 16mm 16pcs, 24mm 7pcs 32mm 2pcs, 44mm 3pcs, Tray loader 1pcs, Lot of spare parts