Used Upc 80 120 for sale (24,963)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,737 h, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 980 mm, fork length: 1,050 mm, empty load weight: 3,698 kg, total length: 1,995 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 200-50/10 Gisdpfoy R E Sajx Albeu Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 140-55/9 Rear tire condition: 20 - 40% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, 3rd valve, rear work light, front work light, roof cover, windshield, load guard, full free lift, safety light, interior mirror, joystick, LED, 1-pedal operation, joystick (Multi-Pilot), optional button panel, floor spot light rear + front, multi-color display, comfort seat, electric brake, electric steering, panoramic rear-view mirror, LED work light, battery year of manufacture 37/2018, battery can be regenerated upon request (for an extra charge).

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar Godpowugczefx Albjiu 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Gijdpfx Aljy E Eytjbsu Documentation, tools, spare blade, and a safety blade change tool.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 1,39,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Gisdpfxsy T Hz Ie Albsu Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 18 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: 35 mm -Protection class: IP 54 Gedpfxjchbvyo Albjiu Quantity: 1 piece available -Dimensions: 490/261/H300 mm -Weight: 38 kg

Condition: used, Included in the delivery: 01x Pallet rack beam, used Material color: yellow Beam type: 7BB Box profile: 120 x 50 mm Design: End beam Bracket: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs depend on the delivery location and scope of delivery and can be requested from us separately. Gsdpey Nxf Dsfx Alboiu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 Gjdpswhk E Hefx Albeiu DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: like new (used), Generally overhauled machine Price: 3.500EUR Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 80 liters Dimensions: 75x70x100cm Electric power: 2.5kW Gjdox N Eguepfx Albeiu Voltage: 380V 50Hz

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Gijdek Abgcepfx Albsu Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Gjdpfjq N Hmhex Albjiu Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Locker changing room 1800 x 1200 x 500 RA2221 Gedeu Sphtspfx Alboiu Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Gsdpfxjrixi Ts Albjiu Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: SDG Multi-body system 1120-1320 - Aerodynamic base plate - LED headlights with fog light - LED work lights for the rear - Preparation for all-round lights - Windshield with sun protection film - DAF Corner View - Central locking with 3 keys - Roof spoiler - FHS color: E1980 Crystal White - Driver's seat, air-suspended, Luxury Air - Adjustable armrests on both sides of the driver and passenger seats - Passenger seat, air-suspended, Comfort Air - Drawer and refrigerator - Xtra Comfort mattress - Curtains along the windshield Gsdpfxoy Tryij Alboiu - Luxury LED interior lighting - Integrated auxiliary air conditioning - Water-air auxiliary heater - Roller blind on the passenger side - Sunroof with electric operation - ECAS remote control - Paccar Connect with navigation - Digital VDO tachograph - DAF infotainment system with DAF Truck Navigation, 10.1-inch touchscreen display - Antennas: FM/DAB/DAB+, 2 mobile phone antennas, GNSS, and extra CB antenna - Acoustic reversing warning system - Front 8t air suspension 161N - Automatic operation to activate the leading and/or trailing rear axle when the axle load of the drive axle allows lifting - Tires: Continental 315/70R22.5 - Engine: MX-13, output: 355kW - 483hp - Automated transmission: Traxon, 12 gears - Driven rear axle with mechanical differential lock - MX Engine Brake - Wheelbase 5.05 m / rear overhang 1.72 m - 75l AdBlue tank - 1240-liter aluminum fuel tanks, 620 liters left, 620 liters right - Two wheel chocks - Four LED work lights - Drawbar cross member with ring spring RF40 G 150B trailer coupling, D-value 137 kN, Dc-value 92 kN, V-value 40 - Electrical connection for trailer, 24V with 15-pin socket - Preparation for aftermarket switches - LED side marker lights - Chassis frame for interchangeable body structure, BDF multi-system application - Preparation for interchangeable systems - Generator 130 A, batteries 2x 210 Ah AGM - Plus warranty for powertrain, full warranty protection for 1 year on the vehicle as delivered by the OE (excluding actual wear parts), in the 2nd and 3rd year for the powertrain without mileage limitation, and breakdown assistance in the 1st year. - Pre-delivery inspection Body: - SDG Multi-body system 1120-1320mm, HV 120KT mounted - SDG coupling VB 575 V3 - SDG telescopic underrun protection

Condition: used, height 2800 mm width 900 mm depth 1200 mm thread M 24 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gijdpfey Swg Sox Albsu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Abrasive mandrels ,different sizes also single to give away. Diameter : 8-10-12-13-14,8-15-16-17-18 mm price piece 10 Euro Diameter : 20-22-25-28 mm Price per piece 12 Euro Diameter : 30-32-34-35-36-38-mm Price per piece 15 Euro Diameter : 40-42-45-48 mm Price per piece 20 Euro Diameter : 50-52-55 mmPrice per piece 25 Euro Diameter : 60-62-65-68 mm Price per piece 30 Euro per piece Godpok R Tnpofx Albsiu Diameter 70 mm price per piece 40 Euro Diameter 80 mm price per piece 50 Euro We are also happy to offer you a package price.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, overall weight: 200 kg, total length: 3,000 mm, load capacity: 2,400 kg, stabau carpet pole ISO class 2: 1,000 - 2,500 kg Pole length: 3000 mm Gisdpfx Alsy Sbiqjbou Pole diameter: 80 mm Data can be obtained from the type plate.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Gisdpjy Evirefx Albsu Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Gijdpfsy Rnpzjx Albou Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 411 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end connectors & REMA 320 plug (other plug types can be installed on request) + Capacity: min. 90-100% (C5 capacity test protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 827 mm Width: 411 mm Height: 625 mm Weight: approx. 560 kg Suitable for the following models and others: Linde E 16 - 386-00 Linde E 18 - 386-02 - side battery change Linde P 50 Z LONG - 368-00 Godpfx Aley Rnlvobsiu Linde P 60 - Linde P 60 - side battery change Linde P 60 Z - 126-00 Linde P 80 - Linde P 80 - side battery change LInde T 30 R - 143-00 Linde W - side battery change Still LTX 70 Still R 06-06 Jungheinrich EZS 570 Crown RT 3000 Crown SC 1013 Crown SC 1016 Crown SC 3013 Crown SC 3210 Crown SC 3210-1.3 Crown SC 5310-1.3 Crown SCT 6010 Nissan AS2N1L13Q OM-Pimespo-Fiat XE 12 Simai TE80IXB Common battery sizes available – please enquire. Transport available.

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 6 milling cutters -2x: left -4x: right Gijdpeb A Sqgsfx Albou -Price: complete -Weight: 4.6 kg/piece

Condition: used, Cast iron marble plate on feet Length: 1200 mm Godpfx Aow Emp Aslbsiu Width: 1200 mm Height on feet: 780 mm Weight: approx 1,5 T

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. Gisdpfx Aljwv Trlebsu The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: new, Year of construction: 2024, functionality: fully functional, Palette board stacking machine Tech characteristics: 1. Dimensions of the processed material (mm) • length - 800-1400 • width - 60-200 • thickness - 14-50 2. Maximum package dimensions (m) • length - 1.4 • width 1.2 • height - 1.3 Gedpfx Aljr E Abvsbjiu 3. Material feed speed (m/min.) - 50 4. Packing speed (layers per minute) 5. Pneumatics • Compressed air pressure (bar) - 5-6 • Compressed air consumption (l/min.) 30-40 6. Service staff (number of people) - 1 7. Total installed power, kW - 8.2

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Giodpsyugctefx Albeu Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: good (used), mileage: 4,16,794 km, power: 206 kW (280.08 HP), first registration: 03/2015, fuel type: diesel, tire size: 265/70R19.5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,430 mm, loading space width: 2,480 mm, loading space height: 2,590 mm, Year of construction: 2015, Equipment: ABS, AdBlue, cruise control, spoiler, tail-lift, = Further Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Roof spoiler - Air suspension Gedpfoyy Ixusx Albsiu - Rear view camera - Sun visor = Notes = Iveco Eurocargo 120.250 4x2 - Thermoking T-800R Fridge - Tail Lift - Euro 6 - Automatic MY: 31-3-2015 KM: 416794 ZCFA71EJ302646721 Box dimensions: 6.43 x 2.48 x 2.59 m Thermoking T-800 R Fridge Diesel/Electric Zepro tail lift Automatic gearbox Euro 6 Camera system Cooling unit brand: Thermo King = Further Information = Axle configuration Tire size: 265/70R19.5 Front axle: Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring suspension Rear axle: Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: Air suspension Weights Unladen weight: 9,400 kg Payload: 6,590 kg Gross vehicle weight: 15,990 kg Functional Tail lift: Rear flap Temperature control: -20 °C to +20 °C Body manufacturer: Thermoking Condition Technical condition: good Visual condition: good Further information Contact VAEX The Truck Traders for more information.