Used Upc 80 120 for sale (24,068)

Condition: used, Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 Bdjdpfxsdaa Hns Aqljc -Diameter shaft: Ø 17 mm -Protection class: IP 23 -Number: 2x motor available -Price: per piece -Dimensions: 395/140/H190 mm -Weight: 11 kg

Condition: used, clamping rail, guide rail, support rail, stop rail -Mounting rail: with T-slot -Length: 1200 mm Bdodsuu U T Ejpfx Aqlsc -Groove width: 15 mm, dimensions see photo technical drawing -Dimensions: 1200/80/H30 mm -Weight: 18.4 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Bdsdpfx Aqeww H Nyelec Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Mounting plate dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between plates: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history available

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component (2K) injection moulding machine Control system: NC4 Control Drive type: Hydraulic Technical Data – Clamping Unit Clamping force: 800 kN Tie-bar spacing: 420 × 420 mm Mounting platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection Unit – Two-component First system (horizontal): Nitrided screw Screw diameter: 22 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General Data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Bdsdpjww H S Ijfx Aqlec Equipment and Additional Information Control language: German Complete machine history – available

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Shaker 4x LDS V721 air-cooled Amplifier : PA 1000L Controller : imv K2 MIMO (Multi Input Multi Output) Software : imv K2 Excitation modes : Sine / Noise / Shock / Real-time profiles Force vector per shaker : 2.9 kN (peak sine) / 1.9 kN (RMS noise) / 4.6 kN (peak shock) Max. load : 100 kg per shaker Acceleration : max. 44 g RMS / 66 g peak Velocity : max. 0.7 m/s Displacement amplitude : max. 25.4 mm p-p (1 inch) Frequency range : 5...4000 Hz Clamping surface for test specimens : 1000 x 1000 mm aluminum profile frame Special features : The four shakers can be operated synchronously or asynchronously with the MIMO controller. With an aluminum profile frame, a clamping area of 1x1 m² can be achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large test specimens such as complete vehicles is possible. The lightweight oscillating elements of the shakers enable excitation frequencies of up to 4000 Hz. Weight: 2000 kg Climatic chamber: Bjdpfour Hrbjx Aqljdc Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / monoblock, welded Dimensions:(mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of power unit: 1,200 2,400 2,200 Door: 2,000 2,000 2 test room windows in the door: 460 460 Weight: 4,500 kg Insulation 140 mm PU, CFC-free, B1 to DIN 4102 External cladding: sheet steel 0.6 mm, painted to RAK 7035 Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K temporal Climatic range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of delivery: (see picture) Example pictures! Actual pictures will follow! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2005, SECOND-HAND BENDING PRESS VECCHIATO MM. 2600X1300 - CE RULES - Opening mm. 1500 - N. 4 cylinders - Top bottom movement Bdodpfx Aqewrzbaeloc - Year 2005 - Safety nets - Manual and CE certificate

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Bjdpfx Aqsyw Ubqoledc Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 1,39,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Bdsdpfx Asy T Hz Ijqlsc Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: excellent (used), AUMA SAR 07.5-F10 + ADOR 63-4/80 Bdsdpfozagi Djx Aqloc

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track Bdjdpfozabx Hsx Aqljc - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide - pawls - track - central track lubrication - electric lifting of the saw blade shaft - electric body lifting - stepless feed speed control - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm - weight approx. 4000 kg ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR Bdsdpfxezabwio Aqlec (in case of significant exchange rate changes, the price may be adjusted)

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES Bjdpfx Aey Uxr Ijqledc – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 1,945 h, load capacity: 1,850 kg, lifting height: 4,800 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,708 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire size: 16x6-8 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2012 Battery condition: 40 - 60% Description: Inspection and safety check recently performed Bedpfx Aqsza I Eyoledc Clamp forks, side shifter, fork positioner, Clamp fork opening width 1920 mm 3rd valve, 4th valve, front work lights, roof, windshield, half cabin, heater, full cabin, full free lift, non-marking tires, interior mirror, joystick, single pedal, Single-pedal operation, joystick (Solo Pilot), comfort seat, electric steering, electric brake, comfort display, optional button panel, panoramic rearview mirror, battery can be regenerated upon request (for an additional charge).

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Bdedpow Sfptsfx Aqlec

Condition: excellent (used), For sale: a set of professional SK40 AD/B 6×80 tool holders according to DIN 69871 standard. The holders are in good technical condition, complete – some fitted with VHM/HSS drills of various diameters. Shank diameter: Ø6 mm Length: 80 mm Clamping type: SK40, DIN 69871 AD/B standard Condition: used, fully functional, visible signs of use (discoloration from heat). Ideal for CNC machining centers, milling machines, and precision drill presses. Bodpfjxcx Uvox Aqlodc

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Bodpfx Aqsw R S S Eeledc

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1025 B • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging Bsdpfjyxgc Aox Aqljdc • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1025 B pump • visible installation/connection

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). Bdedey Abr Hjpfx Aqljc ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished Bdedpfx Aqsval Nrolec T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations) Bodpsy Tkk Tsfx Aqledc

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Bdsdpfxey Tiq Sj Aqljc Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Bsdpfxsyguk Aj Aqlsdc Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps Bdjdey Sz Umopfx Aqljc - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Bedpfx Aqjy Smufeledc Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: with tilting function, without hydraulic unit -Speed: 14 m/min -Roller width: 1200 mm Bdodpfx Aouhr S Deqlsc -Roller diameter: 110 mm -Axle spacing: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Overall dimensions: 3100/2300/H2000 mm -Weight: 1180 kg