Used Used Prouction Lines for sale (51,325)

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: Bwjdpfe Af I Hdox Afgjw - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: excellent (used), 572 USED Line for croissants and crescent rolls FRITSCH CTR + CRH. EQUIPMENT: - calibrator - guillotine with cutting dies for triangles and tubes/waves - croissant rolling/winding unit EXTERNAL DIMENSIONS (in cm): - W: 133 - L: 732 - H: 166 (224 when open) TECHNICAL DATA: - power supply: 3x400V+N+PE 50Hz Bodpfx Afsz Su Dwegsww The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2018, condition: used, functionality: limited functionality, ABM PRESTIGE Line (2× PRESTIGE + 1× LOAD-5) Subject of Sale: Used circular saw sharpening line Model: 2 × PRESTIGE (HSS/CERMET grinders) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Bedpfxsy Ed Snj Afgoww Location: Poland / Katowice Availability: Immediate • High level of automation, minimal operator involvement • HSS & CERMET grinding in a single cycle • High precision and repeatability • 5-station magazine (LOAD-5) • Fast and efficient production • Wide functionality (face/top/side grinding, chipbreaker, automatic measuring) • Price: below (as a set, i.e. two stationary machines and 5-station automatic loader) • Transport & disassembly: by the buyer • Warranty: none • Training: optional (paid) • Year of manufacture: 2018 + 2021 (Both Prestige machines can also operate independently as standalone stationary machines) • New line price: 321,000 EUR

Condition: used, Year of construction: 2004, operating hours: 3,862 h, machine/vehicle number: LC619, Used Tetra Pak TBA-8 SQ 1000 ml filling lineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours).Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Shrink Tunnel TTST-51Conveying: Accumulation conveyor system with Dicolube TP lubricationManufactured by: Tetra Pak engineeringLine application: Beverage production and industrial packagingAdvanced Automation & Control SystemsThe line integrates Tetra Pak automation across its modules for coordinated operation and optimized throughput. The TBA/8-1000 SQ aseptic unit ensures controlled filling conditions, while the cap applicator, conveyors, and end-of-line equipment synchronize for smooth handling and minimal bottlenecks. Safety interlocks and CE-marked protections support secure operation. Quick adjustments on the capper and packer facilitate efficient format handling within the 1.0L range.Centralized module controls for synchronized line operationAutomated cap application for Stream Cap closuresCE-compliant safety architecture across major modulesLubrication-assisted conveyor operation with Dicolube TPProduction Line Integration CapabilitiesDesigned as a cohesive packaging machinery set, this second hand line offers plug-and-produce integration across filling, capping, conveying, packing, and shrink-wrapping. The accumulation conveyor system stabilizes product flow between units, protecting upstream aseptic operations and downstream secondary packaging. The configuration is ideal for producers standardizing on 1.0L cartons.Inline configuration from aseptic filling to end-of-line wrappingConveyor accumulation for balanced flow and reduced stoppagesSuitable for beverage production requiring aseptic carton packagingOptimized for 1.0L cartons; straightforward adjustments within this formatMachine Condition & Maintenance HistoryThe equipment is presented in excellent working order and ready for immediate use, representing a dependable used bottling line for rapid deployment. Component-level details include:TBA/8-1000 SQ: 3,862 operating hours; excellent, ready for immediate useTetra Cap Applicator 88: 7,709 operating hours; working condition for Stream Cap c... Bsdpfszc Impsx Afgoww

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. Bwodpfow Ahfysx Afgew T...

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Bwodpjy Uduusfx Afgew

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Bwedpfx Aokucxlsfgew Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) Bwedpfxjzuynhj Afgjw With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Bedpfx Afey Ud Alegsww

Condition: excellent (used), 590 USED Bread, ciabatta, and bun, roll line KEMPER QUADRO. EQUIPMENT: - dough divider-rounder with belt dough feed - dividing and rounding station + longitudinal cutting rollers + 3 rounding drums - stamping station Bsdpez Rivrsfx Afgeww - cross-cutting guillotine - two stations for double-sided seed topping - tray-loading station (for 60x80 and 60x100 trays) The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Bsdpjz E Dkxefx Afgsww

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion Bwjdpfjvgva Uex Afgew The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Bodsyxd D Repfx Afgsww Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Capacity: 8,190 L Internal Pressure: 6 bar Internal Temperature: 120°C Jacket Pressure: 6 bar Jacket Temperature: 120°C

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Bsdpfx Afoz E Dk Esgsww

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Bwodpfxsxhgl Tj Afgow Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2004, operating hours: 51,870 h, machine/vehicle number: LC692, Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical configuration and installed power follow the standard European TBA 19 line arrangement.The integrated straw applicator supports automated application of drinking straws to compatible 200 Slim cartons, helping prepare finished packs for downstream industrial packaging operations.Production Line Integration CapabilitiesThis second hand Tetra Pak carton filling line is suited to integration with upstream juice preparation and product supply systems, as well as downstream carton conveying, accumulation and secondary packaging equipment. It is configured as a compact filling and pack-completion solution for 200 Slim juice cartons.Machine type/categoryManufacturer/modelYearFilling MachineTetra Pak TBA 19 200 Slim V0202004Various EquipmentStraw applicatorMachines of this type typically operate as part of an aseptic carton packaging line, with conveyors and accumulation equipment coordinated to maintain a steady flow between filling and final packing stages.Machine Condition & Maintenance HistoryThe line is in operation and reported in very good condition. Recorded operating hours are 51,870. Regular Tetra Pak service has been performed at 500-hour and 2,000-hour intervals. No modifications or upgrades are reported, and spare parts are available.Operational Performance & VersatilityConfigured for juice production, this Tetra Pak filling line handles 200 Slim carton packs and incorporates straw application for consumer convenience. The format-specific configuration makes it suitable for producers seeking a used bottling line for carton-based beverage production and industrial packaging where a compact retail format is required.... Bwsdpfx Ao Adtr Nofgjw

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder adhesive binding machine with PUR with remote diagnostics with cooling and drying section with three-knife trimming system DGR D09 with compressor Base machine for solo or inline operation for connection with a three-knife trimmer Equipment - rotary feeder, integrated vacuum technology Winjector R - scoring station with split scoring tools for 2 and 4 grooves - feeder and pressing station including 1 set of standard pressing strips - ejector lift with gripper system for lightweight products - stack delivery (standing delivery) - industrial PC with TFT color display and touch screen function - graphical user interface Navigator E - motorized thickness adjustment * PUR spine gluing unit, mobile - Europe for the production of an adhesive-bound brochure with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR bulk melting system * Cooling and drying section * Hotmelt side gluing unit, mounted on the spine gluing unit Bodpfx Asimqucofgeww * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of adhesive-bound products in offline and inline operation - Offline or inline operation possible * Compressor system 1800 dm³/min.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bedpfx Aoxhf Hisfgoww - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Included in the price - Dismantling - Loading onto trucks - Export documents

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts. Bjdpfxow Nriuj Afgeww

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic Bwsdou Tp N Dspfx Afgsw - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: used, Log band saw Pilous CTR750E, year of manufacture 2024, very good condition, stepless electric feed, 5.5 kW Prices subject to change, errors, printing and typesetting errors reserved Bwedpfevrvlbsx Afgow

Condition: used, Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: Bjdpfxeztv Die Afgeww 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Technical data: - Clamping length: 640 mm (8 x 80) mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: welding and deburring line with a rotating table for PVC windows. Bwedpjz A R I Esfx Afgow The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame rotation - ROTOX EPA 472, year 2005. The production line was used only in Germany and is in very good condition, having been regularly serviced. Negotiable price: 22,000 euros + VAT.

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: - Total power: 31.7 kW - Shredder motor: 7.5 kW - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h Bwsdjzrx Hdepfx Afgsw

Year of construction: 2026, condition: new, PLN-75 Bwsdpfx Afsz Nlfmegew Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls