Used Uv Drying for sale (3,220)

Condition: ready for operation (used), Heidenhain UV 101B ID 317559-13. The costs only cover the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Todpjy Nrkmjfx Airsd

Condition: ready for operation (used), Heidenhain UV 106B ID 546581-01. The costs cover only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will undergo a complete overhaul and will come with a 3-month warranty from us. Tsdpfoy Nrlksx Aired

Condition: ready for operation (used), Heidenhain UV 120 ID 344504-02 The costs cover only the repair analysis of your component, which you can send to us. After the inspection of your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the costs for the analysis will be waived. During the repair process, your component will be fully overhauled and will receive a 3-month warranty from us. Tsdpfsy Nrl Rox Airsd

Condition: ready for operation (used), Heidenhain UV 130 inverter ID: 324 998-03 SN: 8275519 – with test report, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Tjdpoy Nrmhsfx Airod

Condition: ready for operation (used), Heidenhain UV 130 converter ID: 324 998-03 SN: 8781155A – with test report. The item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Tsdpfey Nrmnsx Airod

Condition: ready for operation (used), Heidenhain UV 130 ID 324998-02. The costs cover only the repair analysis of your component, which you can send to us. After evaluation of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will receive a 3-month warranty from us. Tjdpfxey Nrmzo Airsd

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8275519 – with test protocol, expertly fully overhauled and tested, includes 3 months warranty, 100% functional, delivery scope as shown in the photos. Please note: In the exchange procedure, your defective part must not exhibit any mechanical damage such as breakages, as these are no longer repairable. In such cases, an additional invoice of €500 incl. VAT will be issued. Attention: You are bidding on a Heidenhain UV 130 inverter, ID: 324 998-03 SN: 8275519, on an exchange basis (exchange service), professionally overhauled and tested, with a 3-month warranty, 100% functional, and scope of delivery as per photos. In both repair and exchange procedures, your defective exchange component must be free of mechanical damage such as breakages, since these cannot be repaired. Otherwise, a subsequent charge of €500 incl. VAT will apply. Tjdpfsy Nrnfex Aired

Condition: ready for operation (used), Heidenhain UV 140 ID 335009-02. The costs cover only the repair analysis of your component, which you can send to us. After evaluation of your component, you will receive a quotation with the actual repair costs. Upon your repair approval, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and will receive a 3-month warranty from us. Tjdpfx Ajy Nrnxjirod

Condition: ready for operation (used), Heidenhain UV 150 ID 361170-02 The costs cover only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. During the repair process, your component will be completely overhauled and covered by a 3-month warranty provided by us. Todpfey Nrpijx Airod

Condition: used, Drying machine HENRI PETIT JEAN ECO 600A Tedpfeyvk Scex Airod

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Tsdpfx Aoygk A Ijirod Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm - Space requirement: approx. 700 x H 750 mm - Weight: approx. 25 kg

Condition: used, Manufacturer: Triventec Type: Dry ice blasting machine (exact type unknown) Available quantity: 2 units Todezf Uy Hepfx Airod Condition: used Application: Cleaning and surface treatment using dry ice blasting.

Condition: used, Manufacturer: OspreyFrank Todpfszf U Ausx Airod Model: iSteam iS18 Type: Dry steam cleaner Steam pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Todpfx Aszvxxnoirod Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg Todpfx Aijglpywored - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Condition: used, TECHNICAL DETAILS - capacity : 56 [l] - max weight : 80 [kg] - speed : 950 [rpm] - power : 1.5 [kW] - total weight : 265 [kg] - drum size : 500 x 300 [mm] EQUIPMENT Tedpfxev Eg Uge Airod - hoist

Condition: new, 26-HT-Wooddry365-SET Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. Tsdpfx Aiewzzg Ierjd CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Condition: good (used), Telecentric lighting, LED lighting, telecentric lens, measuring lens, industrial camera Tedpfx Aewz Ianjirjd -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: TM-6CN -Lens: Schneider XNP 1.9/35-0501 -Dimensions: 600/80/H100 mm -Weight: 2.5 kg

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Todpfx Aexw D Nhsirsd Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡 Tjdpfx Aofzb Nbeirsd

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Todpfx Aefn Ndcoirod TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. Todequ R Naepfx Airod - Control for temperature regulation This machine is connected and ready for testing in our machine hall.

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Tsdpjr Nclaefx Aired Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. Tjdpfeywh E Aex Aired 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 503382, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, total length: 1,300 mm, total width: 650 mm, total height: 1,750 mm, overall weight: 150 kg, number of chambers: 2, year of last overhaul: 2023, We are offering this ready-to-use Amboss Langbein D2x8 dry air dryer with cooler, manufactured in 2006. Manufacturer: Amboss Langbein Model: D2x8 Year of manufacture: 2006 Condition: ready for use Type: Dry air dryer with industrial cooler Tjdpfszarqmox Airsd Hopper volume: 2 x 50 liters Flow rate: 2 x 15 kg/h Drying temperature: 30-160 degrees Celsius Dry air volume: 80 m3/h - 180 m3/h If you have any questions or would like more information, please feel free to send us a message or call us.