Used Vacuum Bench for sale (5,785)

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Laedpfx Agjucw Tpo Ajf

Year of construction: 2001, condition: ready for operation (used), Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible. Lajdjurwy Aspfx Ag Asf

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Laodpfx Aewih Arog Ajf

Condition: ready for operation (used), Year of construction: 2021, A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible. Lodpfszcfkrjx Ag Asaf

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Lajdpexaphbsfx Ag Ajf

Condition: good (used), mileage: 4,63,570 km, power: 243 kW (330.39 HP), first registration: 04/2004, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 8,000 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2004, Equipment: ABS, electric window regulation, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction Laodpfxezu Rrde Ag Asf - PTO - Rear suspension: Air = More information = Cab: single Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Technical condition: good Visual appearance: good

Condition: used, mileage: 1,15,034 km, power: 301 kW (409.25 HP), first registration: 11/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained MAN FE 410 suction and flushing combination body from Assmann with a water treatment system and radio remote control, as well as a box boom, a Wittig vacuum pump with a Uraca high-pressure pump (P3-45) - Assmann combination suction and high-pressure flushing unit - Water treatment (recycling) - Type: 11.0/229 P-WRG III - Wittig Aqualine 2100 vacuum pump, approx. 1700 cbm/h, 200 bar. - Uraca P3-45 HD pump with 346 l/min - Pneumatic piston extension - Combination cassette boom - HBC radio remote control - 6x4 drive axles - 11,200 liter tank capacity - German vehicle from 1st owner - Leaf spring suspension Ljdpfx Agozdcv Ij Asaf - Air-suspended cab - Cruise control - Differential locks - Radio - Electric windows - Double H gearshift - Financing is available through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend an inspection and testing to ensure that the buyer is not misled about the condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 5,47,604 km, power: 338 kW (459.55 HP), first registration: 08/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: parking heater, Well-maintained MAN 27.460 suction/flushing combination unit from Müller, Canalmaster F130 EG, with a remote control, a telescopic boom, and a Rottec Tec 200 vacuum pump with a Uraca high-pressure pump (P3-45/60). - Müller combination suction/high-pressure flushing unit - Canalmaster F130 EG - Rottec Tec 200 vacuum pump, rotary compressor vacuum pump, water-cooled Lasdpfx Agszuq U Ee Aof - Max. 1500 rpm, 1170 m3/h max. flow rate with free passage - Uraca P3-45 high-pressure pump with 205 bar and 330 l/min - Piston extension – pneumatic - Combination cassette boom - Remote control - Tank capacity: 13,000 liters - 10,500 liters sludge - 2,500 liters fresh water - Discharge/emptying piston as an adjustable partition between sludge and water chamber (3-stage pneumatically adjustable) - Suction/emptying nozzle DN 100 (shut-off slide valve) - Ball valve as a second shut-off valve on the outside. Level indicator on the rear side - Flushing system: HD hose reel DN 25, hydraulically swivelable approx. 180° to the left - HD hose reel DN 13 - Cassette boom: Suction hose cassette DN 100, hydraulically extendable approx. 1250 mm - Approx. 17 m hose length, approx. 8 m lifting height. Connection arm fittings with tanker couplings (brass) DN 100 - Storage compartments: Hoses on both sides, tool/equipment cabinets with approx. 140 liters capacity - 6x2 drive axles - German vehicle, second owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks - Radio - Auxiliary heater - Bed - Dual H-shift transmission - Financing available through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer it on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, and errors. We strongly recommend and encourage an inspection and assessment to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and assessments are possible and expressly desired by appointment.

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: Lasdozuvbqspfx Ag Aef -Working width 1400mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 125kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 9 t, total length: 3,100 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 750 kg, operating temperature: 200 °C, Equipment: CE marking, documentation/manual, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Lsdpfx Ageiimw Ao Asaf Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: good (used), Hardly used Elektra-Beckum double bench grinder with stand and container, in good, fully functional condition. Shipping not possible Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only possible by prior telephone arrangement! Ledpezur Uaefx Ag Asaf Subject to change, interim sale, and errors.

Condition: ready for operation (used), Year of construction: 2015, HANDTMANN VF-620 F,P,A + grinder drive PCK-4 The machine after technical inspection. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. THIS MACHINE IS CURRENTLY UNDERGOING A GENERAL OVERHAUL, WHICH WILL END IN APPROX. 6 WEEKS – Laodew E D Suopfx Ag Aof IF YOU DECIDE TO PURCHASE, PLEASE MAKE A 15% ADVANCE PAYMENT – BECAUSE THERE IS A VERY LARGE INTEREST IN THIS MACHINE WE INVITE YOU TO VIEW THE MACHINE WOLF-GRINDER GD-93-3 - HOLDING DEVICE HV 414 - EXTRA OPTION

Condition: good (used), Vacuum pyrolysis cleaning oven, vacuum pyrolysis oven, pyrolysis oven, cleaning oven, vacuum oven -Vacuum pyrolysis cleaning oven: Vacuum pyrolysis oven -Type: unfortunately without a type designation -Entrance opening: Ø 600 mm -Interior dimensions: Ø 600 x 2480 mm -Vacuum pump: 2.35 kW 1.33 m³/min -Individual components: see photos Lasdozpii Depfx Ag Aef -Dimensions: 5200/1635/H1760 mm -Transport dimensions: 3200/1635/H1760 mm / 2000/650/H610 mm -Weight: 1210 kg

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm Lajdpezpbrksfx Ag Ajf - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Good condition

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Lodpfx Agezp E Dkj Ajaf Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Lasdpfshmmfksx Ag Asf Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Ledpfx Aottc Uasg Aoaf

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! Lasdjiz A Ezspfx Ag Aef The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t equipped with Rockstroh Drain Jet 100-2 high-pressure flushing unit Internal Number: #558 Rockstroh Drain Jet 100-2 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF32 * Approx. 120 liters / minute at 180 bar (40KW) Lsdpfx Ajxc Syreg Asaf * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED roof-mounted warning lights * Various storage options * Watertight, non-slip plastic floor covering * Standard cleaning nozzle set Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, trailer socket 13-pin, battery disconnecting switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, suspension: stability level III, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), ambient lighting in passenger/cargo compartment, charging package dashboard (USB sockets and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, fog lights with cornering function, auxiliary drive 2B with reduction gear, parameterizable special module, crossmember for trailer coupling, crossmember with integrated step, sliding door cargo/passenger compartment left, mud flaps rear, seats in the driver's cab: driver's seat comfort, fuel level sensor for auxiliary heater, separating relay for battery additionally, front axle reinforced, preparation for transmission oil cooler, preparation for cargo compartment partition, winter package, sliding door assist left, sliding door assist right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, automatic activation of driving lights, entry handle on rear pillar rear right, entry handle for sliding door on cargo compartment partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: driving information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: intelligent speed assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: box high

Condition: used, mileage: 4,40,202 km, power: 390 kW (530.25 HP), first registration: 02/2021, fuel type: diesel, overall weight: 34,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro4, total width: 2,500 mm, total height: 3,450 mm, Equipment: ABS, air conditioning, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ DAF Semi-Trailer Tractor XF530 FT #631 Technical Data * Chassis: DAF XF 530 FT, 4x2 * Transmission: Automatic * Engine Power: 530 hp / 390 kW * Emission Standard: EURO VI * Color: blue * Permissible Total Weight (D): 18,000 kg * Unladen Weight: 8,278 kg * Dimensions (L x W x H): 6,160 x 2,55 x 4,00 m * First Registration: 04.02.2021 * Mileage: approx. 440,202 km * VIN: XLRTEH4300G335279 ----Kroll ADR Suction/Pressure Tank Trailer #614 Structure * Manufacturer: Kroll * Type/Model: K 1,5-23,5/36 PESASP * Tank Material: Stainless steel 1.4301 * Total Volume (Air): 23,900 l * Sludge Volume (Air): 19,000 l * Discharge Type: Extension piston * Radio Remote Control: yes * Outrigger Arm: yes, telescopic, mounted on the tank lid High-Pressure System * Speck P52 / 100-150 * Performance: 100 l/min at 150 bar * Flushing Hose 1: approx. 60 m DN13 * Reel: small hose reel for 60 m DN13, position at the rear right in the frame area Vacuum System Ledpfx Agjzuiygs Ajaf * CVS VacuStar 1300 * Performance: approx. 1,220 m³/h * Suction Hose: approx. 20 m DN100, intake via suction hose storage cassette Special Features * Waste bin/scrap box: yes * Work Lights: 2 LED each side + 2 LED on the outrigger * Reversing Camera: yes * Noise Protection Cladding: in front of the pumps on the left and right Technical Data * Permissible Total Weight (D): 34,000 kg * Unladen Weight: 13,300 kg * Dimensions (L x W x H): 11,870 x 2,55 x 3,65 m * First Registration: 27.05.2020 * VIN: W09K36226LWK67604 For further detailed information and/or images, please contact us directly. You can find more vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: new, mileage: 50 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: # 533 Mercedes Benz ACTROS 2546 6x2 / Kroll ADR Suction Tanker, K 1.0 - 13.5 / 36 PESP This Mercedes-Benz Actros 2546 6x2 is equipped with a powerful KROLL suction/pressure tank body, ADR class L4BH, and offers a robust and efficient solution for demanding industrial, sewer, and emulsion suction work with a 14,500-liter tank volume, VacuStar W1300, and Speck P45/85-160. With a telescopic DN100 boom, extensive special equipment, and comprehensive safety and comfort features, this vehicle is optimally equipped for professional operations. Body Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5 / 36 PESP * 14,500 liters tank size (air volume) * 10,000 liters sludge volume / 3,500 liters emulsion chamber * 1,000 liters flushing water volume (non-pressurized) Lodpfx Agex Eqmxo Asaf * Emptying with ejector piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 hp / 338 kW * 2,200 Nm * EURO 6 * Fuel volume approx. 500 l * Cab color MB 9147 Arctic White * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Cooler box Vacuum System CVS VacuStar W1300, approx. 1,200 m3/h at 400 mBar Suction hose cassette with telescopic boom and 20m DN100 High-Pressure System * Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HD hose reel for 60m DN 13 * Approx. 60m flushing hose DN 13 Special Features ADR design L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-chamber DN100 remote controlled * Manhole DN500 on the left side * HD pistol * Soundproofing cladding in front of the pumps on the left and right * LED ambient lighting * Radio remote control with two batteries * Tilting scrap container * Reversing camera * Ladder with bracket and locking points * Advertising panel on the left and right of the tank Technical Data GVW 26,000 kg * Length 10,700 mm * Height 3,800 mm * Width 2,550 mm * Wheelbase 3,900 mm Conclusion: A professionally equipped Mercedes-Benz Actros 2546 with a powerful KROLL ADR suction/pressure tank body, VacuStar W1300, Speck high-pressure system, comprehensive comfort and safety features, and a telescopic DN100 suction arm. An ideal solution for industrial, sewer, and emulsion suction projects where performance, efficiency, and reliability are essential. For further detailed information and/or pictures, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Worldwide delivery / Dealer inquiries welcome! Internal number: #646 The images are example images. Actual equipment and color may vary. STS V-1.5 Vacuum Tank Trailer Tank * Tank capacity 1,500 liters * Tank hot-dip galvanized * Tank slightly tilted backwards for easier cleaning * Side flushing opening in the tank to remove contaminants or blockages without opening the tank lid * Tank lid can be opened completely to the passenger side and secured with hook screws * 2 safety levels installed as standard to prevent damage to the compressor * Syphon separator * Overflow with 2 balls and sight glass * Manometer on vacuum line with protective bracket * Mechanical level indicator with color scale Engine and Compressor * Vacuum compressor MEC 3000 with 3,500 liters of air capacity * Vacuum max. -0.8 bar (continuous operation at -0.5 bar) * Overpressure max. 0.49 bar * Maintenance-free V-belt drive for vacuum compressor * Industrial engine (gasoline) * Electric starter, oil sensor, control panel with ignition switch, battery and tank * Internal intake hose to avoid protection within the engine unit * Muffler for vacuum compressor with oil collection * Heat-conducting sheet made of stainless steel above the exhaust * 1 liter of biodegradable compressor oil stored in an oil bottle holder * 5 liter gasoline canister in holder * Standard funnel with long neck for changing and refilling engine oil * All engine-related components and accessories are housed in a lockable engine box * Engine box made of aluminum and powder-coated in the desired color Chassis * Self-supporting chassis, completely hot-dip galvanized * Low-loader tandem chassis 2.7t * Track width identical to passenger cars and Sprinters for optimal driving * Lowest possible center of gravity of the suction tank Ljdpfx Agezit Uqo Asaf * 2 axles with 1,350 kg load capacity each and independent wheel suspension from a well-known manufacturer * Continuous welded V-drawbar * Sturdy fenders with metal lamp housing * Lashing brackets for quick securing of the suction hoses using rubber bands * Storage option for tools and accessories Suction Tank * Overrun brake with return mechanism * Automatically locking ball coupling * Support wheel reinforced * 13-pin cable connection Connections and Hoses * 2x Suction hoses (3") 5m long with Perrot couplings * 1x Suction lance 3" (1500mm long) * 1x Perrot connection (3") in the tank lid at the bottom * 1x Perrot connection (3") on the side, on the right in the direction of travel For more detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #583 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure flushing and suction tank body, ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure flushing and suction tank body is a NEW vehicle in a complete ADR L4BH configuration. Equipped with a VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special equipment, it is immediately ready for the most demanding sewer, industrial, and hazardous material operations. Body ? Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH ? Tank material: S355J2+N (St 52.3) ? ADR suction/pressure tank Type K 14.0 / 28 PE Lodpfxjzuiyao Ag Ajaf ? Extension piston with 3 locking points: ? 3,300 l water / 10,600 l sludge ? 5,500 l water / 8,200 l sludge ? 7,700 l water / 6,000 l sludge ? Suction from open bodies of water possible ("comfort version") via cassette boom with integrated filter ? Tank wagon equipment ADR - Type class AT/FL L4BH ? Emptying via pneumatically operated piston ? Sludge water drain DN80 for pumping back via the boom into the sewer ----Vacuum system ? CVS VacuStar 1600 - approx. 1,550 m³/h at 400 mbar ? Approx. 20 m HD hose DN125 ? Hose storage cassette with simultaneous telescopic boom DN125 ? Parallel routing of suction and HD hose via boom ? Right-hand suction hose reel (hydraulic) with 30 m DN75, can be suctioned through ----High-pressure system ? Uraca KD 718 - approx. 315 l/min at 170 bar ? Large HD hose reel for 240 m DN25, 180° swiveling ? Equipped with 160 m DN25 ? Small HD hose reel for 80 m DN13 (hydraulic) ? Equipped with 80 m DN13 ----Special features ? Hose storage cassette with telescopic boom DN125 ? Infinitely adjustable height of the suction hose (hydraulic, roller guide carriage) ? Boom arm hydraulic, telescopic, 180° swiveling ? ADR L4BH incl. EX/II, EX/III and AT ? Spray gun ? LED rotating beacons ? LED ambient lighting ? Working functions remotely controlled via CAN-BUS ? Radio remote control with 14 functions ? Hot water hand wash basin ? Large equipment cabinet at the rear left (e.g. for a push camera) ? Reversing camera with 7" color monitor (day/night mode) ? Soundproofing cladding in front of the pump compartment ? Large equipment box ? Tool box ? Holder for traffic cones ? Vise ? Ladder ? Large advertising panels on the right and left ---- Conclusion A fully equipped, new Arocs/KROLL combination vehicle with a powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional companies with the highest technical requirements. For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our terms and conditions and with the exclusion of any warranty.

Condition: used, mileage: 6,800 km, power: 335 kW (455.47 HP), first registration: 01/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #536 Mercedes-Benz Actros 2546 BL 6x2 with Kroll ADR suction/pressure tank vehicle K 1.0-13.5 / 36PESP Brand new KROLL ADR suction/pressure tank vehicle on a Mercedes-Benz Actros – built for the toughest jobs right from the start. Maximum suction power, a powerful high-pressure system, and high-quality ADR L4BH technology make this vehicle an excellent choice for professional disposal companies and industrial operations. Superstructure * Manufacturer: KROLL * Tank material: S355J2+N (St 52.3) * ADR suction/pressure tank K 1.0–13.5 / 36PESP * Container volume, air: approx. 13,500 l; sludge volume: approx. 11,200 l * Emulsion chamber: max. 4,589 l * Rinse water (non-pressurized): approx. 1,000 l * Discharge via extension piston * Chassis: * Mercedes-Benz Actros 2546 L 6×2 * PowerShift 3 automatic transmission * 460 hp / 338 kW * EURO 6e; diesel tank: 400 l * Cab color: Arctic White * 2x LED rotating beacons on the cab * Rearview camera * Navigation system * Air conditioning * Vacuum system: * CVS VacuStar W1300 – approx. 1,200 m³/h at 400 mbar * Suction hose reel for approx. 50 m DN75 (tank lid, passage through the tank) incl. 30 m plastic suction hose DN75 * High-pressure system: * Speck P45/85-160 * Delivery rate: 85 l/min at 160 bar; small hydraulic HD hose reel for approx. 60 m DN13, hydraulically operated * Incl. 60 m HD hose, rubber DN13, hydraulically operated * Special features: * ADR design L4BH (incl. EX/II, EX/III, AT) * Upper suction port DN100, remote-controlled * Manhole DN500 on the top, with ladder and work platform * HD pistol * Soundproofing cladding on the left and right in front of the pumps * LED ambient lighting * Remote control * Tilting scrap container * Ladder with bracket and fixing points * Advertising panels on the left and right of the tank Conclusion: An extremely robust, fully ADR-approved KROLL suction/pressure tank on a Mercedes-Benz Actros base – with a powerful W1300 vacuum system, a high-performance HD unit, and complete safety and comfort features. Immediately ready for use in industry, waste disposal, sewer services, and hazardous goods transport. Laodpfjv Nu Sbox Ag Ajf For more detailed information and/or pictures, please contact us directly. You can find a wide selection of other vehicles for PURCHASE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Worldwide delivery/Dealer inquiries welcome! Lasdpfezi Ir Rox Ag Asf Internal number: #650 The images are example images. Actual equipment and color may vary. STS V-2.0 Tank * Tank with a capacity of 2,000 liters * Tank hot-dip galvanized * Tank slightly tilted to the rear for easier cleaning * Lateral flushing opening in the tank to remove contaminants or blockages without opening the tank lid * Tank lid opens completely to the passenger side and is secured with hook screws * 2 safety levels installed as standard to prevent damage to the compressor * Siphon separator – overflow with 2 balls and sight glass * Manometer on suction line with protective bracket * Mechanical level indicator with color scale Engine and Compressor * Vacuum compressor MEC 3000 with 3,500 liters of air output * Vacuum max. -0.8 bar (continuous operation at -0.5 bar) * Overpressure max. 0.49 bar * Maintenance-free V-belt drive for vacuum compressor * Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery and tank * Internal intake hose to avoid protection within the engine unit * Muffler for vacuum compressor with oil collection * Heat-conducting sheet made of stainless steel above the exhaust * 1 liter of biodegradable compressor oil stored in an oil bottle holder * 5-liter gasoline canister in a holder * Standard funnel with long neck for changing and refilling engine oil * All engine components and accessories are housed in a lockable engine box * Engine box made of aluminum and powder-coated in the desired color Chassis * Self-supporting chassis, completely hot-dip galvanized * Low-loader tandem chassis 3.5t * Track width identical to passenger cars and Sprinters for optimal driving * Lowest possible center of gravity of the suction tank * 2 axles with 1,750 kg load capacity each and independent wheel suspension from a well-known manufacturer * Continuous welded V-drawbar * Sturdy fenders with metal lamp housings * Rung holders for quick securing of the suction hoses using rubber bands * Storage option for tools and accessories Suction tank * Overrun brake with return mechanism * Automatically locking ball coupling * Support wheel reinforced * 13-pin cable connection Connections and Hoses * 2 suction hoses (3") 5m long with Perrot couplings * 1 suction lance 3" (1500mm long) * 1 Perrot connection (3") at the bottom in the tank lid * 1 Perrot connection (3") on the side on the right in the direction of travel For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.