Used Vacuum Laminator for sale (4,153)

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Fjdpfx Agox R D Efo Rjpb Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: excellent (used), Gernal vacuum tumbler. 2,000 litres, fully programmable. Immaculate condition. Fpedox R N Ulopfx Ag Reb

Condition: new, Year of construction: 2026, workpiece weight (max.): 350 kg, load capacity: 350 kg, Vacuum Lifter STEEL SYSTEM UP300 (suitable for sheet metal – for use with a plasma cutting machine) This device enables the removal of small parts from the work table, even in areas where a magnet cannot be used. Equipped with a rechargeable battery and a battery level indicator. Compatible with all lifting machinery. Fedpfx Agjxqaw Us Ropb • DIMENSIONS: - Height: 307 mm - Width: 215 mm - Depth: 247 mm • Device weight: 12.5 kg • Lifting capacity: 250 kg • 1 DS. SYSTEM suction pad ∅250 with replaceable sealing gasket • Integrated inspection manometer • Power supply: external battery (1 included – DeWalt, Milwaukee, Makita compatible) • Features an ergonomic, non-slip handle • Material dimensions: Minimum working area dimensions: 30x30 cm Material dimensions: 1×1 m See our other listings for additional equipment. We offer different machine configurations – contact us with your requirements and we will tailor the machine to your needs!

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Fpedoxgg Tbspfx Ag Reb Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: good (used), mileage: 2,25,500 km, power: 286 kW (388.85 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, loading space volume: 16 m³, Year of construction: 2008, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = Volvo FM380, 6x2*4, 16 m³ sludge and high-pressure truck with crane, first registration: 2008 Further information: Engine: 380 HP Fpedpfx Agjx Iv Rzj Rjb Transmission: I-Shift Suspension: leaf spring Mileage: 225,500 km Wheelbase: 4,300 mm Emissions standard: Euro 5 First registration: 23.01.2008 Year of manufacture: 2007 Electric windows and mirrors Air conditioning Reversing camera Webasto cab heater and pump compartment heating, engine pre-heating No warning messages! Last service at 222,500 km (08.10.2025) Last technical inspection at 218,700 km (02.04.2025) Tachograph recently inspected: 08.10.2025 The truck is in good and fully operational condition, with no active faults/warnings present. Superstructure: Korp&Son 16 m³ with 2 remote controls, sludge suction and high-pressure flushing unit with stainless steel floor and tipping device. Compartment (1): 8 m³ for high-pressure flushing water. Compartment (2): 8 m³ for sludge. Water pump: URACA with 1-inch high-pressure hose and ½-inch high-pressure hose. Vacuum pump: Moro model PM200, 930 m³/h, pressure 0.9 bar, vacuum -0.9 bar; all in flawless and fully operational condition! All components serviced in October 2025. Front tyre tread depth: 70% Rear tyre tread depth: 70% Price: €, Stockholm, Sweden = Further Information = Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 70%; Right tyre tread: 70%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Double tyres; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyre size: 385/65R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Left tread: 70%; Right tread: 70%; Suspension: air suspension Crane: Year of manufacture 2007 APK (General Technical Inspection): valid until 03.2026 Technical condition: good Visual condition: good

Condition: used, Item: D-8667-Becker-Side Channel Blowers Used Side Channel Blowers – Available Ex Stock Several individual side channel blowers with electric motors and silencers. Originally used in a food and dairy packaging line. Suitable for vacuum and low-pressure air applications. Units are not mounted together and can be sold separately. Fsdpfxjx N E T Ue Ag Rspb Ex stock – ready for delivery. Can be sold individually or as a lot.

Condition: used, Year of construction: 2008, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight> Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Fpjdpfox R D D Ijx Ag Rjb Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Electrical cabinet

Year of construction: 2026, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Fpsdped Ecc Tsfx Ag Rsb Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, functionality: fully functional, Year of construction: 2026, Vacuum Lifter/Suction Cup PANEL SYSTEM DS550 MINI Vacuum device for installing all types of wall and roof sandwich panels at various inclinations. The unit can be upgraded with additional accessories to increase its range of operation. FREE WITH DEVICE! - FULL RADIO REMOTE CONTROL UP TO 200m. Device features: • Compatible with all types of cranes and truck-mounted cranes (HDS) • Tool-free adjustment and configuration of suction cups • Power supply: 12V or 24V battery (up to 12 hours of operation) • Max lifting capacity: 350 kg Fpjdpfxexpha Ue Ag Rsb • Suction cups: 500mm x 100mm with REPLACEABLE FOAM The device can lift: • Horizontal wall panels up to 8 m long, vertical panels up to 8 m long • Roof panels at different roof angles up to 8 m long • Other panels, e.g. sinusoidal profile • Skylights Safety systems: • Acoustic and visual alarms for vacuum pump operation • Side safety straps • Vacuum tank with safety valve Basic machine configuration includes: • 2 arms, each 1.25 m long • 2 cross-arms with adjustable mounting for suction cups • 4 suction cups • Control unit with charger • 2 safety straps Included in the price: • Operation manual, warranty card (12 MONTHS) CONTACT US FOR DETAILED OFFER * Option to purchase a central suction cup as additional equipment CHECK OUR OTHER LISTINGS! *The stated dimensions refer to panels with double trapezoidal profile and a minimum thickness of 10 cm Feel free to contact us DS SYSTEM

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Fpodpfx Agox Ryuie Rjb Dimensions: 2,150mm tan to tan x 1,600mm diameter

Year of construction: 1998, condition: used, Manufacturer: CERAMModel: Ecovac 08-1Type: Pneumatic transfer for bulk productsYear: 1998Motor power: 4.07 kWSuction capacity: 184 / 200 m³/hSuction pressure / vacuum: 3 / 3 mbar Fodpfx Agsx R D Dns Ropb

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. Fsdpfx Asdvltysg Rjpb VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, functionality: fully functional, empty load weight: 130 kg, lifting power: 1,000 kg/m, Year of construction: 2026, machine/vehicle number: 550, Vacuum Lifter Panel System DS 550 MAX - Radio Remote Control Configuration can be customized to individual requirements SPECIFICATION: • 6 arms, each 1 m long • 6 cross arms with adjustable suction cup mounting • 12 side suction cups • Wall adapter • Control unit with charging function • Control unit with radio remote control Fjdpfexnanzex Ag Repb • Radio remote control handset • 2 safety belts • Maximum lifting capacity: 1000 kg FEATURES: • Compatible with all cranes and HDS systems • Suitable for various working conditions • Suction cups can be configured independently without tools • Power supply: 12V battery (up to 12 h of operation) • Battery charge indicator • Vacuum gauge • Vacuum reservoir • Max lifting capacity 1000 kg • Device weight approx. 130 kg • Suction cups 500mm x 100mm with REPLACEABLE SEAL

Condition: used, Year of construction: 2003, Manufacturer : CFMModel: 3156Year: 2003Type: vacuum cleanerConnection diameter: Ø 50 mmPower: 1.6 KW Fpjdpfx Agjx R Dlrs Rsb

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Fjdpfodwh E Asx Ag Ropb Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Fedpfx Agswutibo Rjpb Weight of the device: 50 kg Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: used, Year of construction: 1998, Manufacturer : VMI Rayneri Model Trimix (TXR) 10 litres Year : 1998 Type : Vacuum mixer Application : Dispersion, dissolution, homogenisation, deaeration, heat exchange > gels, creams, pomades, …   Total volume : 10 Litres Empty weight : 300 kg Power : 3.5 KW Fpedpfxex R Di Dj Ag Rsb Power supply: 230 V Pressure : 2 bars Temperature : 120°C Jacket + insulation Mixing : – Anchor blade with scrapers: 0 – 60 rpm – Counter agitation: 0 – 180 rpm – Dispersion/emulsion turbine: 200 – 3000 rpm   Sold with water temperature controller : Manufacturer : SOLEV Model : RE 50-3-SC-R-20-2D Year : 1998 Heating capacity : 3 KW   Documentation available

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: DS550, VACUUM LIFTER PANEL SYSTEM DS550 ROTO Vacuum device for installation of all types of roof and horizontal wall sandwich panels at various inclination angles, additionally equipped with 180° panel rotation. The most versatile model in the PANEL SYSTEM product range. Available with radio control, and with single or dual vacuum circuits. Can be suspended from any type of crane, HDS, or forklift. Lifting capacity: 400 kg Control: Radio remote Power supply: Battery (up to 8 hours of operation) Battery charge indicator: Yes Mounting position: Horizontal Fpjdowuryfopfx Ag Rjb Number of suction cups: 8 Number of arms: 4 Material dimensions: 1-16 m Dual circuit system capability: Yes (optional, extra charge) Device weight: 200 kg

Condition: used, Year of construction: 1980, Manufacturer: Krieger Model : Molto Mat Universal 100 (MMU 100) Year : 1980 Type: vacuum mixer   Main tank: Fodpfxjx R A Urj Ag Rjpb Total tank volume: 144 L / useful volume: 100 L Working pressure: -1/+2 bars Maximum operating temperature: 120°C Minimum load capacity: 33 L   Jacketed : Capacity: 26 L Maximum operating temperature: 150°C Working overpressure: 4 bars Insulation thickness: 35 mm   Counter-rotating mixer Slow agitation – two speeds : external mixer (anchor) /min: 9/18 – 18/36 inner mixer /min : 17/34 – 34/68 Homogeniser speed three speeds rpm: 1150 / 2300 / 4500   Raise/lower: hydraulic Tilting: hydraulic   Technical documentation available. Weight : 1280 kg  

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Fpodpfxowzafpe Ag Rjb Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Materials in contact with product: stainless steel. Useful capacity: 5 L Fpodpfx Agsx R A Huo Rob Total capacity: 6.8 L Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: new, functionality: fully functional, gearing type: other, fuel type: electric, color: other, overall weight: 110 kg, operation weight: 600 kg, maximum load weight: 600 kg, lifting power: 600 kg/m, Year of construction: 2025, machine/vehicle number: 550, Panel System DS550 Vacuum Lifter -Vacuum device for installing all types of wall and roof sandwich panels at various inclination angles. -The most versatile model in the PANEL SYSTEM product line. Detailed specifications: -Lifting capacity: 600 kg -Control: Radio (remote control included) -Power supply: Battery (up to 12 hours of operation) Fpodewt Afvspfx Ag Rob -Battery status indicator: Yes -Mounting position: Vertical/Horizontal -Vertical wall mounting: Yes -Number of suction cups: 8 -Number of arms: 4 -Material length range: 1-16 m -Dual-circuit system option: Yes (for an additional charge) -Device weight: 100 kg Device configuration can be modified (lifting capacity, control type, additional equipment). The price refers to the PANEL SYSTEM DS 550 unit with 8 suction cups and radio control.

Condition: used, Year of construction: 2018, Manufacturer: Velo Model: FTV-15MQ Year: 1990 (refurbished 2018) Type : Rotary vacuum drum filter Fpodpfxjx R Awyo Ag Rsb Drum : Outside diameter 1600 mm x Length : 3000 mm Filtrate separator Extraction pump Evacuation belt / conveyor Electrical cabinets  

Condition: used, Year of construction: 1985, Manufacturer : Dumek Model: – Year : 1985 Type: Vacuum mixer / Homogenizer Total volume: 80 L Useful volume: approx. 50 L Slow agitation : Stirring / counter-stirring Rapid agitation : rotor / stator 3.3 KW Up/down: mechanical Tilting: manual Jacketed with integrated heating unit Immersion heaters (new): 2 x 3000 W Regulation: mechanical Tank bottom sample Vacuum pump Fpedjx R Awaepfx Ag Rsb New scrapers are required; these items can be quoted separately.

Condition: used, Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at con Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Fedpfsx R Anxex Ag Rspb Max temperature : 200°C Other Sold with platform + stairs + feed hopper.