Used Vacuum Membrane Press for sale (15,272)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Rcedpfjzvz Tbjx Anyef Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Rodjzv Skdspfx Anyecf Year of manufacture: 1977 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP Hydraulic CNC Press Brake 1320 mm / 40 t Touchscreen Control + Servo System Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to hundreds of companies across Europe. The MTP 1320/40 hydraulic press brake is designed for accurate and efficient sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is suitable for workshops and manufacturers in the electromechanical, automotive, agricultural, shipbuilding, aerospace and light-industry sectors. MTP-3212 TOUCHSCREEN CONTROL The modern MTP-3212 controller combines simple operation with advanced programming functions: - Touchscreen interface - Automatic bending-angle calculation - Storage for thousands of programs - Manual programming without visualization - Tool library and editing - SD card memory - Crowning correction - Angle correction - Axis correction AMADA-PROMECAM TOOL CLAMPING The machine is equipped with a fast and secure AMADA-Promecam-style manual tool-clamping system. It enables quick punch replacement without additional tools, reducing setup time between jobs. SAFETY EQUIPMENT - Side safety guards - Safety light curtains - Secured rear safety zone - Automatic machine stop when intrusion is detected TECHNICAL DATA - Nominal force: 400 kN / 40 t - Working table length: 1320 mm - Distance between columns: 900 mm - Throat depth: 180 mm - Ram stroke: 100 mm - Maximum daylight: 290 mm - Back-gauge range: 500 mm - Approach speed: 80 mm/s - Working speed: 9 mm/s - Return speed: 80 mm/s - Main motor power: 4 kW - Dimensions: 1500 × 1300 × 1600 mm - Controller: MTP-3212 touchscreen - Tool clamping: AMADA-Promecam style - Crowning correction: Yes - Angle correction: Yes - Axis correction: Yes The MTP 1320/40 combines compact dimensions, intuitive touchscreen control and reliable hydraulic technology. It is an efficient solution for precise bending and repeat production work. Rcsdpfjyr N E Eox Anyof Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 40 t * Stroke under nominal load: 6 mm * Slide stroke: 120 mm * Strokes: 55 strokes/min * Maximum die height: 220 mm * Die height adjustment: 80 mm * Throat depth: 260 mm * Working table: 710 × 480 mm * Table thickness: 80 mm * Table hole diameter: Ø180 mm * Bed opening: Ø200 × 150 × 300 mm * Slide surface: 320 × 270 mm * Maximum frame inclination: 25° * Distance between columns: 300 mm * Punch hole diameter: Ø50 mm * Punch hole depth: 70 mm * Motor power: 4 kW * Machine dimensions: 1600 × 1180 × 2310 mm * Machine weight: 3580 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. Rcsdpfxsytdl As Anyef We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: good (used), The HSM 35/2100 is a horizontal channel press/baler for waste materials, including paper, cardboard, film, foam, and rubber. Pressing force: 32 t / 320 kN Pressing cycle time: approx. 34 s Loading aperture: 2100 × 740 mm Pressing chamber: 2900 × 800 × 1000 mm Maximum bale size: 1200 × 800 × 1000 mm Bale weight: approx. 400–700 kg Throughput: approx. 5–10 bales/h Rcjdpfx Anjv Alacoyjf Motor: 11 kW, 380 V, 3-phase Feed height: approx. 1200 mm Overall dimensions: approx. 6500 × 1450/1630 × 2300 mm Machine weight: approx. 4500 kg

Condition: ready for operation (used), functionality: fully functional, pressing force: 70 t, table width: 495 mm, table length: 650 mm, TECHNICAL DETAILS Pressing force: 70 t Stroke, min.: 10 mm Stroke, max.: 90 mm Table length: 650 mm Table width: 495 mm Column width: 400 mm MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,600 x 3,350 mm Dry weight: 9,000 kg Shipping packages: 4 pcs. EQUIPMENT Documentation Rcedpfozrmm Ssx Anyef

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 400 t, stroke length: 355 mm, operating speed: 110 mm/s, reverse speed: 110 mm/s, table length: 4,100 mm, throat depth: 410 mm, distance table to ram: 550 mm, total length: 5,800 mm, total width: 2,500 mm, total height: 3,800 mm, overall weight: 30,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, COLGAR SYNCHRONIZED PRESS BRAKE, PIS SERIES, WITH DOUBLE VARIABLE DISPLACEMENT PUMP: FLOOR-MOUNTED INSTALLATION BENDING LENGTH: 4100 MM Rcedszvb Rtspfx Anyef CAPACITY: 400 TONS AXES: Y1-Y2-X1-R1-Z1-X2-R2-Z2 WITH ANTHROPOMORPHIC REGISTER CNC CYBELEC, COLOR VIDEO GRAPHIC, MODEL MODEVA 10S AIR-CONDITIONED ELECTRICAL CABINET WILA CENTERING TABLE AUTOMATIC PUNCH AND DIE CLAMPING SYSTEM SET OF TOOLS INCLUDED

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Filter 30 m2 Rcsdoilug Sjpfx Anyjf Spindle speeds 2850

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 787515, aerzen type: GM 25 S No.: 787515 Year of manufacture: 2001 kW: 22 rpm: 2960 Rcsdjw Nfzkjpfx Anyjf m3/min: 7.8 bar p1: 1.0 bar p2: 0.6

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Rsdpfx Ansy Saursyocf Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Rcedpfx Anszrnpujysf Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: used, Year of construction: 2022, total length: 5,020 mm, total width: 2,150 mm, total height: 2,680 mm, Colour: White Weight: 9.100 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00030430-ERH - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 15.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5025mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 9100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rcsdjzkki Ujpfx Anyef Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Rcjdszvlrzopfx Anyjf Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Rsdporx S Hnsfx Anyjcf

Condition: used, Year of construction: 2007, Very little used Antares model AKER 630/50-OO chamber type filter press. - Manufacturer: Antares - Model: AKER 630/50-OO - Type of filter press: Chamber type - Dimensions of filter plates: 630 x 630 mm - Number and material of plates: (49) polypropylene chamber plates and (2) end plates Rodpfozvn Edjx Anyscf - Number of chambers: 50 - Closing of filter press: Electrohydraulic - Hydraulik Vrchlabí model SHA-45, electric motor 1.5 kW - Removal of filter plates: Manual - Filtrate discharge: Open delivery - Includes: local control panel (switchboard is not included)

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW Rcjdpfxezvmqfj Anyef - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Rcsdpott A T Tsfx Anyof Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: Rcsdpfxsugtkxo Anyef - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making Rcedpox Ry Hrjfx Anyjf • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 31230 12050, functionality: fully functional, pressing force: 120 t, table length: 3,100 mm, oil tank capacity: 190 l, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, We offer this used Dener DMP-CNC/120-3020 press brake, manufactured in 2012. Rcsdpfozuxpdox Anyjf Type: DMP-CNC/120-3020 Bending force: 120 t Bending length: 3020 mm Weight: 8000 kg Year of manufacture: 2012 The machine was manufactured in 2012 and purchased by us as a brand-new unit. Since its purchase, it has been operating in a single company under the supervision of permanent operators. I assess its technical and visual condition as very good – the machine is in continuous operation, well-maintained, clean, and fully functional. Key parameters and equipment: • Model: Dener Puma 3100 x 120 CNC • Pressing force: 120 tons • Bending length: 3100 mm • Control: Intuitive ESA S 500 CNC controller with 2D graphics (easy to program, menu in Polish). • Number of axes controlled by CNC: 4 axes (Y1, Y2, X, R). • Back gauge: Automatic, moving forward-backward (X axis) and up-down (R axis), controlled directly from the CNC panel. • Table deflection compensation: Manual. • Tooling clamping: Quick-clamping system, Amada/Promecam (Euro) type, with levers – significantly reduces setup time. • Safety: Full side protection and optical curtains (safety barriers) with CE certification. Technical condition: • Electrical cabinet and hydraulics are in their original condition, with no non-factory modifications or leaks. • The machine has been regularly serviced and has been used for light and medium-sized parts.

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible Rcjdpoq Ruvvjfx Anysf - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: used, mileage: 1,16,000 km, power: 243 kW (330.39 HP), first registration: 01/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Mercedes Model Actros 1833 4x2 Bucher FlexLine C60 Year 2022 Condition Very good Serial Number W1T96300310546463 Ref. nr. 498053 Reg. date: 17-01-2022 Last seen: 25-11-2025 Hk: 330 Km: 116000 Gearbox: Automat Eurotype: 6 Diesel tank: 1 Tank liter: 290 L Rear view camera: ? Air conditioning: ? Cabin type: Actros Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55R22,5 - 315/70R22,5 Cover% left 50% - 50% Front suspension: Air Suspension rear: Air Toolbox: ? Total weight: 18000 Kg Net weight: 12730 Kg Load capacity 5270 Kg Manufacturer: Bucher FlexLine C60 Tank capacity: 6000 L High pressure pump: Urace P3-10 High pressure capacity: 104 bar. / 200 l/min High pressure pump hours: 402 Vacuum pump: CVS Vacustar W1300 Rjdpfx Asx Nufgjnyscf Vacuum capacity: 21.666 L/min Vacuum pump timer: 512 Remote control: ? Water heater: ?

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Rcsdpfx Ansykyuzsysf Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: Redjy Ey Niepfx Anyjcf - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: good (used), Year of construction: 1990, power: 1.4 kW (1.90 HP), pressing force: 16 t, stroke length: 200 mm, table width: 300 mm, table length: 4,700 mm, table height: 850 mm, throat depth: 300 mm, total length: 4,700 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 2,800 kg, Straightening press for bars and tubes, pressing force 16 tons, press element L = 1500 mm + 2 attachment elements, each 1600 mm long, each with 1 tailstock, with numerous support blocks and plungers. Rcsdpfxszwgyps Anyjf