Used Vacuum Sintering Furnace for sale (4,303)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: Ledpfozu Nvzjx Ahtohk In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- Lhodjvq I Tnjpfx Ahtjk BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Condition: used, mileage: 4,10,000 km, power: 169 kW (229.78 HP), first registration: 12/2000, fuel type: diesel, overall weight: 15,500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, Year of construction: 2000, Equipment: ABS, Manufacturer Mercedes Model Atego 1523 4x2 Slamsuger Year 2000 Condition Good Serial Number WDB9702731K551246 Ref. nr. 618034 Reg. date: 29-12-2000 Hk: 230 Lhodpfex Iy H Hex Ahtek Km: 410000 Gearbox: Manual Eurotype: 2 Diesel tank: 1 Tank liter: 200 L Radio: ? Disc brake: ? ABS: ? Tire Size: 285/70R19,5 Cover% left 80% 50% Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 15500 Kg Net weight: 5900 Kg Load capacity 9600 Kg Manufacturer: FP Production Tank capacity: 6000 L High pressure pump: Pralissoli High pressure capacity: 120 bar - 122 l/min Vacuum pump: Jurup PR 150 (2017) Vacuum capacity: 900 m9/h

Condition: used, mileage: 3,08,000 km, power: 169 kW (229.78 HP), first registration: 05/2017, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, Manufacturer Mercedes Model Atego 1323 4x2 Euro 6 Hvidtved Larsen Cityflex Year 2017 Condition Good Serial Number WDB96720620037282 Ref. nr. 447927 Reg. date: Hk: 230 Lhedpew Ikpdsfx Ahtek Km: 308000 Gearbox: Manual Eurotype: 6 Cabin type: Atego Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 285/70R19,5 - 285/70R19,5 Cover% left 40% - 80% Front suspension: Parable Suspension rear: Parable Total weight: 12000 Kg Manufacturer: J. Hvidtved Larsen A/S Tank capacity: 4000 L High pressure pump: Uraca P3-10 127 lpm 100bar Vacuum pump: Wittig SLS 54 5400 lpm Flush hose: 50m 3/4? Suction hose: 30m 3?

Condition: used, mileage: 3,88,000 km, power: 353 kW (479.95 HP), first registration: 07/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, Manufacturer MAN Model TGS 35.480 8x4?4 Hvidtved Larsen 16.000 l. Year 2014 Condition Very good Serial Number WMA92SZZ8EM649126 Ref. nr. 897783 Reg. date: Hk: 480 Km: 388000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 400 l Rear view camera: ? Lhedev D Tgaepfx Ahtok Air conditioning: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 315/80 - 385/65 Cover% left 50 - 60 - 60 - 50% Front suspension: Springs Suspension rear: Air Wheelbase: 3600 mm. Total weight: 32000 kg. Net weight: 17250 kg. Load capacity 14750 kg. Manufacturer: Whitewood Larsen Tank capacity: 16000 liters. High pressure pump: HPP EL 122 High pressure capacity: 122 l/min at 130 bar. High pressure pump hours: 130 Vacuum pump: Samson V21 Vacuum capacity: 21.600 l/min Vacuum pump timer: 3665 Remote control: ? Water heater: ?

Condition: used, mileage: 6,16,000 km, power: 191 kW (259.69 HP), first registration: 11/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1997, Equipment: ABS, Manufacturer Scania Model P94/260 4x2 NZ SLS590 Kombi 8.400 l. Year 1997 Condition Good Serial Number XLEP4X20004373122 Ref. nr. 1327822 Reg. date: 26-11-1997 Hk: 260 Km: 616000 Gearbox: Manual GR900 Eurotype: 2 Diesel tank: 1 Tank liter: 400 l Cabin heater: ? Cabin type: CP19 Drum brake: ? ABS: ? Engine brake: ? Ledpfxjwb Rbne Ahtehk Tire Size: 315/80R22.5 Cover% left 30 - 20% Front suspension: Springs Suspension rear: Springs Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 18000 kg. Net weight: 12900 kg. Load capacity 5100 kg. Manufacturer: Simon Moos SLS 590 Tank capacity: 8420 liters. High pressure pump: Prattisolli MS55 High pressure capacity: 318 l/min Vacuum pump: Samson V15 Vacuum capacity: 1000 m3/h.

Condition: used, mileage: 4,34,511 km, power: 335 kW (455.47 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Municipal vehicle * Sun visor * ABS * ASR Lhsdpfx Aozup Ukohtsk * On-board computer * Cruise control * Hill start assist * Power windows * Power-adjustable mirrors * Heated mirrors * Central locking * Fog lights * Sunroof * Driver comfort seat * Seat heating * Differential lock, rear axle * Rotating beacon, orange * Air dryer * Driver airbag * Radio * Auxiliary heater * Cool box * Reversing camera * Lift/steerable axle * Air intake, top * Trailer coupling * 2-line air connection * Duomatik air connection * Hydraulic connection for trailer * 12-speed * Suspension: Air * Payload: 14638 * Continuous braking: Retarder ----Superstructure: Müller VACUMASTER F140 EKGH suction superstructure (year of construction 2012) with flushing system, GGVS/ADR for class AT + FL, next tank inspection according to ADR 02/27, tank material S355J2+N, tiltable, tank volume: 13,800 liters (water tank 1,155 liters), extension piston, hydraulic tailgate, floor control + remote control, hydraulic flushing hose reel at the rear left 80 m / DN 13, CVS vacuum pump VacuStar W 1300 R (1,240 m³/h), high-pressure pump Speck P45/60-160 (57 ltr/min, 160 bar). Hydraulic connections for trailer operation. Recorded operating hours: vacuum pump: 3,309 h, HD pump: 403 h----ADR class FL incl. EX/II, EX/III + AT Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations is our general terms and conditions (see imprint).

Year of construction: 2006, condition: ready for operation (used), Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible. Lhedpfxowg E Dzs Ahtjk

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Lhodpfxsy Aafrs Ahtsk

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Ljdsy N Uxgopfx Ahtohk

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Lhodpfxeyfv N Rs Ahtsk

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Lhodevxvgrepfx Ahtsk

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Lsdpfx Ahjyvix Istohk

Condition: ready for operation (used), Year of construction: 2011, A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Lhedpfx Aexltvajhtsk

Condition: ready for operation (used), Year of construction: 2018, An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible. Ljdpsy E S Dxjfx Ahtohk

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Ljdpfx Aetxb Avohtshk

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Lhsdpjzhw Sdefx Ahtsk

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Lodsygw S Aopfx Ahtshk

Condition: ready for operation (used), Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible. Lhodpfjyv H E Eox Ahtjk

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Ledpfx Ahsw Emyzotohk

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Lsdoucw Tpepfx Ahtehk

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Ljdpfx Ahjtxb Apstohk

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Lhedpfotndwuox Ahtek

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Lhsdpfx Ahowih Arstsk

Condition: ready for operation (used), Year of construction: 2021, A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible. Ljdpozcfkrsfx Ahtshk