Used Valve Dn 50 for sale (38,019)

Condition: good (used), 25 running meters tire rack Used, very good condition, see pictures height 2,5 m depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Cpsdpfxofdik Is Afpsu Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 5.250,-- net ex stock Offer consists of: + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Cedpfxsi Hl T Ie Afpopu (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 50 rm pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 7 m Depth 110 cm, blue Beam length 2.7 m orange girder with load /shelf 3050 kg Negotiable price: € 10.150,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 7 m +144 pcs. beams, length 2,7 m, 3050 kg payload/slot +288 pcs. suspension locks + 38 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Cpodpfxsfkgq So Afpou Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, 50 rm pallet rack Jungheinrich type MPB new goods New goods, see pictures height 9 m depth 110 cm, blue beam length 2,7 m yellow girder with load / compartment 3000 kg Negotiable price: € 12.750,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 9 m + 144 pcs. beams, length 2,7 m, 3000 kg payload/slot + 288 pcs. suspension locks + 78 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Bay load 12 tons. Beam yellow. Product is in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances Cpedolp Ntgopfx Afpsu company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), DN Solutions Boring Bar Holder | 80mm | L70510537C Here you have the opportunity to purchase a like-new boring bar holder for a horizontal lathe. DOOSAN/DN Solutions item number L70510537C or 850418-00830B Shipping within Germany including packaging is €20.00 net. Shipping outside Germany is available upon request. We welcome inquiries for additional original DOOSAN tool holders for your CNC machine tool. We have over 1,000 spare parts in stock. Scope of delivery: See photos Codpjr Hnvdefx Afpopu This sale is subject to exclusion of any liability for material defects. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Cjdougmwlspfx Afpopu

Condition: new, Year of construction: 2024, Rod material New with a length of 6000mm per rod Codpfx Aerkz Tmsfpepu

Condition: new, Year of construction: 2024, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm Csdpodkxlkefx Afpspu - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: new, Hammel shredding shafts Wood, garbage, metal 5-7-7 6-8-8 8-10-10 10-10-10 Cpsdpfx Afeudy I Eopju AT-TEC Recycling Solutions GmbH is a metal construction company specializing in the manufacture of shredding tools for shredder machines with an attached welding shop. Our experienced team is proud to offer high-quality and customized solutions. We focus on quality, innovation and customer satisfaction to ensure that our products fully meet our customers' requirements. Our customers come from various industries, including waste management, recycling companies and machine manufacturers. We maintain long-term partnerships and are happy to supply our products and services to companies looking for reliable and high-performance shredding solutions.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Cedou Hrf Dspfx Afpopu Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 750 mm Codjpam E Rjpfx Afpspu cutting width 170 x 310 mm cutting speed 25 - 90 m/min 130 mm 130 mm 205 mm Impact energy 205 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm

Condition: new, empty load weight: 858 kg, maximum load weight: 2,642 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 2,200 mm, loading space volume: 18 m³, color: grey, construction height: 3,040 mm, working width: 2,060 mm, Hydraulics, automatic reversing, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3.500 kg - Unladen weight: 858 kg - Payload: 2,642 kg - Interior dimensions: 405 x 200 x 220 cm (L x W x H) - Exterior dimensions: 561 x 206 x 304 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: Included! Standard equipment: - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic support wheel in the middle Special equipment included in the price: - Low chassis 195/50R13C - Parabolic suspension incl. shock absorber for 100km/h fitted instead of rubber-sprung axles - Parabolic suspension axle with shock absorber for absolute driving comfort! - PLane and bows 220cm interior height - Truck tarpaulin quality with water drainage on the roof - Sliding tarpaulin on the left in the direction of travel - Fitted tarpaulin incl. skid locks New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cpsdpfju Htt Nsx Afpeu

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, Machining centre from year 2019 with only 253 cutting hours! TECHNICAL DETAILS Travels Travel X: 800 mm Travel Y: 450 mm Travel Z: 510 mm Rapid traverses Rapid traverse X: 36 m/min Rapid traverse Y: 36 m/min Rapid traverse Z: 30 m/min Worktable Worktable dimensions: 1,000 x 450 mm Maximum table load: 600 kg Spindle Head: 12,000 rpm BT 40 Tool changer: 30 positions Rotary axis 4th axis: Tsudakoma Rotary axis diameter: 160 mm MACHINE DETAILS Control: Fanuc iSeries Cpjdpjxlip Nofx Afpeu Operating hours Cutting hours: 253 h Operating hours: 300 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1061276, filter area: 50 m², total height: 2,760 mm, total width: 1,520 mm, total length: 1,520 mm, operating pressure: 6 bar, Submission of a bid obligates timely collection by 27.02.2026! Cpjdpeyfn Sdofx Afpou TECHNICAL DETAILS Filter area: 50 m2 MACHINE DETAILS Control type: 24 or 230 V Opening/closing time: max. 2 s Operating pressure: 6 bar Dimensions (L x W x H): 1,520 x 1,520 x 2,760 mm EQUIPMENT Sendzimir-galvanised pipe components Shaped parts Machine connections Flame-retardant antistatic PU spiral hoses Hose cuffs Pipe clamps Mounting material for conveying chips and dust from 7 woodworking machines Pneumatic shut-off slides Slide housings made of die-cast aluminium

Condition: refurbished (used), functionality: fully functional, The VF 50 is specifically designed for quality and pressure, making it an excellent choice for butchers, specialty processors, and those working with difficult, firm products. Condition: Fully Refurbished — Guaranteed peak performance and dependability. Extreme Filling Pressure: Industry-leading 55 bar pressure, essential for the firmest product masses, such as very dry, cold, or highly textured sausages. Compact Design: Remarkably small footprint ideal for limited production space. High-Quality Portions: Excellent filling accuracy across a wide range, from 5 gr. up to 100,000 gr. (100 kg). Reliable Technology: Equipped with vane cell feed system for air-free filling and consistent product quality. Control System: Classic, reliable Digital Motor control system with clear analog pressure gauges. Cpedpfx Asxu Trtefpsu Throughput: Solid production capability of up to 2,600 kg/Hour for its size class.

Condition: excellent (used), functionality: fully functional, The Ishida Multihead Weigher is a high-speed, precision weighing machine designed to maximize packing efficiency by achieving the target weight with minimal product giveaway. It is an industry standard for maximizing yield in packaging operations. Cedpfoxxk Tijx Afpopu Precision & Capacity High Weighing Capacity: Features a dual capacity, capable of 4,000 g-2,000 g per head or 8,000 g - 4,000 g per head. Ultra-Low Giveaway: Offers extremely fine precision with a Minimum graduation of 0.5 g / 1.0 g, which minimizes product waste and maximizes profit margin. Flexible Weighing Range: Supports a broad Weighing range of 105 g - 4,000 g / 375 - 8,000 g. Operational Benefits High-Speed Operation: As a multihead weigher, it operates at extremely fast rates by calculating the best combination of weights from multiple hoppers simultaneously. Robust Construction: The "SS(WP)" designation and appearance suggest a stainless steel, washdown-protected (WP) design, ensuring durability and simplified cleaning in a food processing environment. Complex Combination: Uses multiple weighing heads (indicated by the "214W" in the model name, typically 14 heads) to achieve highly accurate weights rapidly.

Condition: excellent (used), functionality: fully functional, The FCA 50 is renowned for its speed, versatility, and precision, making it a critical asset for high-volume processors. Secure Double Closure: Automatically applies two high-strength aluminum clips to form a tight, hermetic seal, ensuring product safety, integrity, and reduced spoilage. Csdpfx Afexv Rv Sepspu High-Speed Automation: Designed for continuous, high-cycle output to match the performance of modern vacuum fillers, eliminating bottlenecks at the finishing stage. Touch Screen Control: Features an intuitive, modern control panel for easy program changes, recipe storage, and precise monitoring of clipping parameters. Maximum Product Versatility: Handles a wide range of casing types, including plastic, collagen, fibrous, and certain natural casings, and is ideal for various product shapes (straight, curved, or netted). Air-Free Precision: Works in perfect synchronization with upstream fillers to ensure the product is tightly packed and void-free before clipping, crucial for quality slicing and extended shelf life. Robust & Hygienic Design: Constructed entirely from high-grade stainless steel, built for demanding industrial environments and effortless washdown procedures.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: BORA20260001, compressed air tank capacity: 1,000 l, Inverter-driven screw air compressor from 7.5 kW to 75 kW / 10 Hp to 100 Hp. 5-year warranty, energy-efficient with performance inverter, available in 8-10 bar and 16-24 bar versions. Cedpfx Ajygib Asfpepu

Condition: used, Year of construction: 2017, operating hours: 921 h, 2017 | Genie TZ-50 DC w/ Drive 17.09 m | Used Trailer-Mounted Boom Lift | 921 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 17900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 23 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Cedpfsyf Dxyox Afpepu Considering the age of the machin everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38151 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, I will sell a butterfly valve GEFA DN200 + Prowal control. - NEW. - PRICE IS FOR 1 PCS ///// Cpjdpfev T T Amjx Afpeu

Condition: used, TERLET mixer 50 litre N° 9800 564 Cpsdpfxeygvfue Afpou Vacuum-sealed stainless steel vessel with double jacket Tilting lid Bottom agitation, agitator with scraper anchor Control : Geared motor with variable speed 1.1 kW – 3x 380 volts Pressure : Internal vessel -1/3 bars - 100°c Jacket 4 bars - 100° c - 2 litre With electrical cabinet

Condition: new, Year of construction: 2026, neu 2026 090180 Februar 2026, Zwischenver Türkei 8300 € 160.19 € 50 mm 152 mm 162 mm 3 1.1 kW 4,5 m/min 60x10 mm / 600 mm; 20x10 100x15 mm / 600 mm; 50 x 35x35 mm / 600 mm; 15x15 35 mm / 600 mm; Dm. 20 mm Codpfx Afewiqm Topepu 70x2 mm / 1200 mm; Dm. 25 70x30x3 mm / 1500 mm; 30x 50x50x3 mm / 1600 mm; 20x 50x50x6 mm / 600 mm; 30x3 50x50x6 mm / 900 mm; 30x3 810 mm 950 mm 1500 mm 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: used, Year of construction: 2018, operating hours: 625 h, 2018 | Genie TZ-50 DC w/Drive (17m) | Used Trailer-Mounted Boom Lift | 625 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 34 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rust on trailer , all functions operate 📄 Want to see the full inspection, extra photos, or a video? Cpsdpfjycy Dgjx Afpju Tip: The reference "38155 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1993, working width: 500 mm cutter head: Tersa number of blades: 4 surface table length: 2800 mm table adjustment: lever read out table height: scala sourface fence adjustable: yes Cjdpfoyhgiasx Afpspu motor power: 5,5 kW machine length: 2800 mm machine width : 1000mm weight: 900 kg

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,971 h, load capacity: 5,000 kg, lifting height: 5,440 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,194 kg, total length: 2,900 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift truck Cpsdpoxn U Icsfx Afpju Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tire size: 355/45-15 non-marking Rear tires type: Superelastic Rear tire size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a truck from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this RX60-50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment and custom construction of forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Sideshift, Full free lift,