Used Venture Distributor for sale (400)

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Dwodpfx Adozmtl Rsroa Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: used, Year of construction: 2009, Homag BOF 211 VENTURE 16L Dodpfozpf Trsx Adrowa Year 2009, 5-axis machine.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. Dwjdpfx Aozp Ih Eodrsa It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: excellent (used), Year of construction: 2008, used CNC machining center Manufacturer: Weeke Type: Venture 1 Year of manufacture: 2008 Machine with console table, 6 supports adjustable in the X-axis, 2 vacuum cups per console, vacuum pump Busch 76 m³/h vacuum connection for templates laser pointer for indicating the position of the vacuum cups Working area X: 200 – 3250 mm Working area Y: 70 – 1050 mm Working area Z: 12 – 100 mm Djdpfx Adezp E Hlsrewa 18 vertical drilling spindles 6 horizontal drilling spindles, 4 of which are in the X-axis and 2 in the Y-axis. Nut saw in X/Y direction, swiveling by 90° Milling spindle 9 kW up to 24000 rpm, with 6-position tool changer at the rear Control system POWERCONTROL PC 85T with TFT 17″, WoodWop 5.0 incl. MDE and production list software Delivery includes only the tools and HSK collets shown in the pictures!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used 4-axis CNC machining center Manufacturer: Homag Type: BAZ 211 Venture 21L Year of manufacture: 2010 Highlights! - Flex 5+ unit - PowerEdge gluing unit - MPU drilling head - and more Console table with 8 manually adjustable consoles, 2 vacuum cups each, side and end stops, LED position indicator for vacuum cups 6 sets of extraction rails, vacuum connection for templates WORKPIECE PARAMETERS: – Workpiece dimensions / work table: 4175*1550 mm – Workpiece thickness: – Max. 300 mm including clamping devices for milling; with standard clamp max. 60 mm; gluing: max. 40 mm – Up to max. 60 mm with standard clamp SAFETY AND PROTECTION DEVICES: CE compliant; SAFETY GUARD ON THE RIGHT WITH DOOR left and rear: wall mounting! Tooling: 18 kW spindle and 18-position tool changer (turret) + 10-position turret changer, C-axis and interface for Flex5+ unit MPU drilling head with 30 spindles (V20/H10/S360°) (integrated swivel axis 0-185°) Flex5+ sawing/drilling/milling unit Power Edge 360° gluing package with pre-trimming station and 1-roll Blowing nozzle for workpiece edge 2* combined edge/radius milling and pull blade unit Tool change station on the right VACUUM PUMP 100/140 m3/h Control: POWERCONTROL PC85 CONTROL PANEL FOR PROGRAM START; WOODWOP Version 6.0 DOCUMENTATION AND CONTROL TEXTS: GERMAN Djdezp Edqspfx Adrewa Delivery includes only the tools and HSK chucks shown in the pictures!

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Djdpfjx Ey H Iex Adrjwa

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. Djdpozr N H Usfx Adrewa • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Working range X: 4200 mm Working range Y: 1550 mm Working range Z: 260 mm 10kW, 5-axis DRIVE5CS electro-spindle, HSK63F connection Number of vertical drilling heads: 12 Number of horizontal drilling heads X: 4 Number of horizontal drilling heads Y: 2 90-degree grooving saw unit 15-position tool changer 8-position tool changer at the rear of the machine Work table with 8 rows of supports Chip conveyor 2 vacuum pumps Power Touch control Dwsdoytyidjpfx Adrea Software: woodWOP 7.1, WoodWop Office Professional New 5-axis electro-spindle motor (21,645 Euros according to invoice) to be installed on November 27, 2025! Includes suction cups and 8 PowerClamp clamping devices for frames. Available mid-October 2026.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 Dwodeyxn Tispfx Adrja WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Dodpoy Edqqofx Adrewa Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Dwsdpfjd I Eqiex Adrsa -Connection: 460 x 400 mm -Material: sheet steel -Dimensions: 765/440/H630 mm -Weight: 12 kg

Condition: used, Socket distributors, site power distributors, connection cabinet -Equipment Dwjdpfx Aoc Sml Dsdrsa -Circuit breaker -Main fuse -1x socket: 16 A -1x socket: 32 A -Schuko: 3 -Dimensions: 270/280/H340 mm -Weight: 8 kg

Condition: used, Sensor-actuator distributor, distributor strip Dwodpfx Ajdntfdjdrea -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg

Condition: used, Statomat distributor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: AER drive electronics -Type: P8801 -Type: P8801 -Number: 1x control cards available -Price: per piece -Dimensions: 80/120/H30 mm -Weight: 0.11 kg Dwsdpfxocc Ap Ro Adrja

Condition: used, Sensor-actuator distributor, distributor strip Dodpfx Asdntffodrswa -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

Condition: used, Socket distributors, site power distributors, connection cabinets, power distributors, damp room distributors, wall distributors, power distributors Dwedpfx Adehibmkjrsa -Power distributor: wall distributor power connection box -FI circuit breaker: 25/63 A -Sockets: 1x 63A, 3x 32A, 1x 16A, 2x 220V -Individual components: see photos -Dimensions: 1200/300 / H250 mm -Weight: 16.8 kg

Condition: used, Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g Dwjdpfedntfgjx Adroa

Condition: used, Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 Dwjdpfxjd Tqkqo Adroa -8-way: distributor -Weight: 800 g

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor -Hydraulic distributors: Hydraulic distributor block from CNC machining center Santenberg GTC S 2 -Individual components: see photos Dedpfx Aektm D Aedrewa -Submission/Price: complete -Dimensions: 300/210/H190 mm Total weight: 8.4 kg

Condition: good (used), Field distributor Dsdpfxjb A I Trs Adrowa -multiple distribution boxes available -Price: per piece -Dimensions: 250/170/H110 mm -Weight: 2 kg

Condition: good (used), Statomat distributor, control card, output card, control unit, edgebander, edgebander -Manufacturer: AER Drive Electronics -Type: P9101 -Type: P9101 -Number: 7 tax cards available -Price: per piece -Dimensions: 80/135/H30 mm Dwsdpfxjcc Aqfs Adroa -Weight: 0.11 kg

Condition: used, Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp Dwjdpfx Adjhz Utyjrja -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available Dedpeirf Eyofx Adrswa -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve Dwodpsyx Dfnsfx Adrsa -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Djdpfx Ajffphbedrjwa -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg