Used Venture Distributor for sale (313)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. Nwedpfowzl Hxex Ag Njc • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Rotary feedthrough, rotary valve, rotary distributor Nwjdpfxob A Nbtj Ag Noc -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Condition: good (used), Quantity divider, quantity distributor -Number: several available Price: per piece -Dimensions: 360/170/150 mm Nwsdpfxob A Nfdj Ag Noc -Weight per piece: 38 kg

Year of construction: 1975, condition: good (used), Compressed air breathing apparatus, respiratory protection -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Handover: in its current condition as inspected Nsdpfx Ageb A H Nts Nowc -Weight: 100kg

Year of construction: 1975, condition: used, Compressed air breathing apparatus, respiratory protection Njdpfxsb A Hi Dj Ag Newc -Handover: in its current condition as inspected -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Weight: 100 kg

Condition: used, Year of construction: 2025, Filter system, immediately available! NEW in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damperExtraction fan, "DER4" series for clean air-side installation, single-sided suction, direct drive. Main design features: Spiral housing made of galvanized steel, pre-configured for horizontal installation in MultiStar series filters IEC standard motor High-performance impeller with backward-curved blades, designed for clean-air extraction operation Suction nozzle with spark protection Impeller made of welded steel, statically and dynamically balanced For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance:Volume flow (max. permitted): 15,000 m3/hTotal pressure increase: 3,000 PaInlet nozzle: 450 mm diameterOutlet nozzle: 450 mm x 355 mmDrive motor: 18.50 kW, 3000 rpm at 50 Hz | 3600 rpm at 60 HzVoltage / Frequency: 400 V, 50 HzMotor efficiency class: IE3, Premium EfficiencyWeight, approx.: 330 kgRotation direction: RD 0 1.1.1. STcold conductor 18.5 kW 1.2. STMultiStar VR 6.6-195.25317AMultiStar modular filter system, with vibration cleaning, for installation outside explosion hazard zones. Design features:Galvanized, self-supporting sheet steel constructionPressure surge resistance 200 mbar (type tested, Dekra-Exam 342863200a-23ExA-Sip)Housing negative pressure resistance max. 5500 Pa (avoid fluctuating stress)EU type-tested rupture discsWeather protection cladding of the filter section with inspection door(s) and required number of exhaust nozzles (depending on air volume) Fire resistance EW 90ef, MPA-tested Clean-air nozzle, as per project drawing BG-tested needle felt filter material, suitable for wood and paper dust and many other types of dust Filter bags, externally pressurized, with reusable internal support elements Filter cleaning occurs during operation breaks Expansion chamber for pre-separation The permissible fill level of the expansion chamber strongly depends on the material properties (bulk density, grain size, tendency to form bridges, etc.) and is approximately 400...700mm. Inspection door with viewing window and limit switch Connection shaft for rotary valve, or similar. Technical data and dimensions:Filter area: 195 m²Filter bags: 144 pcsFilter bag length: 2530 mmBag diameter: 170 mmShake-off: 0.18 kW, 400 V, 50 Hz - 1 unitAgitator drive: 1.50 kW, 400 V, 50 HzFootprint, L x W: 2880 mm x 2880 mmSpace requirement, L x W: Space requirement as per system drawingHeight: 9110 mm Additionally included in delivery: Dry fire-extinguishing line, consisting of: o C-hose connection with blind coupling * o Riser pipe from filter base o Distributor pipe system with sprinkler nozzles o Notice sign Note: According to DIN EN 12779:2016 sec. 5.4.2.3, the water connection must be arranged 0.4 m to 0.8 m above the floor and, in the event of a fire, be safe and easily accessible for connecting a fire-fighting hose. The BGHM additionally recommends installing a dirt trap in the riser. The components, installation materials, and labor required for this are not included in the basic price of the dry extinguishing line. These can optionally be provided by the customer or as a custom-built stand = 3000 mm special height. The base frame is not included in the scope of delivery and will be designed and specified separately.1.2.3. Additional S Nwjdpfx Agex U Egro Nsc

Condition: excellent (used), Here we offer you a 3DMICROMAC laser marking system microCUT Enclosure Laser source IPG Raylaighs-3 axis scan system Power sensor 1 Power sensor 2 Camera system for positioning Camera system for quality inspection Cooler Suction Control cabinet with IPCs Distributor Cooling media Machine dimensions: Machine weight: 2 tones width 922 mm, depth 4653 mm, height 2925 mm Components: Suction: height 2869 mm, width 760 mm, depth 1577 mm cooler: height 1697 mm, width 1440 mm, depth 860 mm Weight (without filling) 500kg Nwodpfefgbt Ejx Ag Njc Laser rack: height 1786 mm, width 856 mm, depth 806 mm Weight 500kg Switch cabinet: height 2001 mm, width 1616.05 mm, depth 605 mm Machine connections: Electrical: mains voltage 3*400 VAC/N/PE Mains power consumption 74A Frequency 50/60Hz Power consumption 51,3kW Control voltage 24/5VDC Main fuse NH 100A gG Mudule: Laser source: mains voltage 400 VAC Frequency 50/60Hz, power 16.7 kW, current consumption 59A Cooler: mains voltage 400V, frequency 50/60Hz, current consumption 40A Machine: Consumables Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid state: Class 1 Oil. Class 1 Water: Class 4 Residual oil content ᐸ 10µg/m³ Water content ᐸ 6 g/m³ Pressure dew point 3 °C Consumption ᐸ 120 l/min Cooling water cooling unit modules: Temperature cooling water outlet 21°C Temperature cooling water return 26°C Setpoint tolerance 1K Cooling water flow 69l/min Free pump pressure 1.5 bar DI water cooling unit Temperature cooling water outlet 26°C Temperature cooling water return 31°C Setpoint tolerance 1K Kühlwa [...]

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, fuel type: diesel, color: yellow, power: 30 kW (40.79 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 30 kW (40.79 HP), nominal power (apparent): 38 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,110 mm, total width: 1,000 mm, total height: 1,350 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGEV, type of cooling: water, HELVETICA POWER offers: 30 KW 38 KVA Generator / Diesel Generator ⭐️ Stage V (EU) / Euro 5 compliant – suitable and approved according to current European emission standards. ⭐️ Oil-tight chassis, ideal for construction sites, industry, agriculture, and many other applications. ⭐️ CE-compliant in accordance with applicable regulations ⭐️ Sound-insulated (Super Silent) design Nwodpfjwbkkpsx Ag Nec ⭐️ Equipped with emergency power switch / ATS (Automatic Transfer Switch) unit for backup power operation ⭐️ Digital control panel plus integrated remote control ⭐️ Yunnei Stage V diesel engine designed for continuous operation ⭐️ Stamford type (licensed CN): CE-certified high-quality brushless synchronous alternator with 100% copper winding ⭐️ AVR system (automatic voltage regulation dependent on load) ⭐️ The generator is delivered with a practical, heavy-duty yellow tarpaulin truck cover Warranty / Guarantee / Service ⭐️ One-year factory warranty! ⭐️ Optional: up to 2-year extended warranty, significantly exceeding industry standards (extendable upon request). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: due at purchase. ⭐️ Delivery available throughout mainland Europe for an additional charge. 🚚 Pickup: from our warehouses in Kefikon (TG, Switzerland) or Konstanz (Germany) 🚚 Worldwide delivery upon request 👍 Dealer inquiries welcome – contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ More Models & Configurations ⭐️ Other power ratings available (approx. 7 kW to 100 kW) ⭐️ Stage V (EU) / Euro 5 compliant versions ⭐️ Alternative engine options available (e.g. Cummins, Deutz, Volvo) ⭐️ Optional features: larger tank, auxiliary tank, tank and water heating ⭐️ Many versions available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keywords: power generator, generator, emergency generator, backup generator, power unit, energy generator, power supply unit, standby power unit, emergency power supply, NEA, backup power, replacement power, backup power supply, power supply, power source, autonomous power supply, off-grid operation, site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, petrol generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, single-phase generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, silent generator, super silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home backup power, commercial power, industrial power, agricultural generator, construction equipment, workshop power, server backup, PV backup, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power maker, power device, backup power device, diesel power unit, construction site power unit, 22KW 28KVA 30KW 38KVA 34KW 43KVA 44KW 55KVA 19KVA 15KW 38KVA 30KW 63KVA 50KW 125KVA 100KW 100KVA 80KW

Condition: new, Year of construction: 2022, functionality: fully functional, power: 121 kW (164.51 HP), volume flow: 7,350 m³/h, nominal heat output: 110 kW (149.56 HP), tank capacity: 1,000 l, fuel: diesel, 10 units of mobile heaters, as new, unused, in original packaging, year of manufacture 2022. REMKO CLK 120 with oil burner and oil tank. Each includes a moisture-resistant thermostat type RT-5. Air distributor head with 2 outlets of Ø 400mm. Each with 2 x warm air hoses, 7.6 m long, including closure strap, Ø 405mm. Single-line extraction set for 1000-liter oil tank. Including quick couplings and device connection hose. Oil tank, diesel tank, heating oil tank, storage tank. Double-walled PE combination tank VET, capacity 1000 liters. Nwedpfjxgn Dzjx Ag Noc

Condition: new, SEW Eurodrive MFP21D / Z23D field distributor SN:01.1721326701.0002.11 ,unused with storage traces, 100% functional, scope of delivery according to photos Njdpfspnpn Eox Ag Nowc

Condition: used, mileage: 3,18,699 km, power: 235 kW (319.51 HP), first registration: 09/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: blue, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, * ABS * ASR (traction control) * On-board computer * Cruise control * Hill-start assist * Analog tachograph * Electric window regulators * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Rear window * Longitudinal and transverse differentials locks * AP axles Nwsdpfjw S Agpjx Ag Noc * Steel bumper * Air dryer * Air-suspended driver's seat * 16-speed * Suspension: leaf spring * Payload: 6,080 kg * Retarder: engine brake ----Body: Schwing concrete pump P 2023-110/75 RB, 4-section, Z-fold, 4 arms, distributor boom KVM 24-4 H (Vector), max. vertical reach 23.1 m, max. horizontal reach 19.5 m, max. depth reach 13 m, slewing range 370°, delivery line (pipe DN) 125, 3 m end hose, max. output 114 m³/h, max. delivery pressure 80 bar, radio remote control + cable remote, fully hydraulic 4-point outriggers, oil cooler, centralized lubrication, high-pressure water pump. Read operating hours: Pump 5,133 h, Boom 6,369 h, Water pump 555 h, HP-pump 45 h, Agitator 9,820 h, Vibrator 581 h----Low folding height (under 5 m), also ideal for indoor operation! Sale to commercial customers only. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION SUBJECT TO CHANGE, ESPECIALLY EQUIPMENT AND ACCESSORIES. All contracts for sale, invoices, pro forma invoices, orders, and sales discussions are subject to our general terms and conditions (see legal notice/imprint).

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SH-250, total height: 1,700 mm, total width: 2,000 mm, total length: 3,000 mm, pressing force: 250 t, operating speed: 4 mm/s, reverse speed: 8 mm/s, stroke length: 450 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. Nsdpfxswk Hkqe Ag Newc • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.

Condition: new, functionality: fully functional, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: crane, IVECO EUROCARGO 180E32 Year: 2026 DIESEL / Euro 6E Mileage: 0 km Nwjdpsx Sdc Hjfx Ag Nec Manual gearbox / Engine displacement: 6,728 cc / 235 kW GVW: 18,000 kg Payload: 6,970 kg / Wheelbase: 4,185 mm Equipment: - Air conditioning Bodywork: - Tipper body: 4,400 x 2,550 x deck height 1,400 mm - Crane PM 18024 SP + JIB 513.20 . Antenna . Proportional distributor . Radio . 4 stabilizer legs . Winch preparation

Condition: good (used), Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 Nwjdpfeivumtsx Ag Nsc -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Condition: good (used), Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip Nwodpeivum Esfx Ag Njc -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Condition: new, Year of construction: 2023, Brand new system stacker with elevating cabin designed for storing and retrieving loads as well as for order picking in very narrow work aisles. Type (group): Order picking (high storage) Operating mode (guidance): Induction loop Year of manufacture: 2023 forklift (in production, delivery May/June) Serial no.: 6959414 Nominal load capacity: 1500 kg Center of gravity: 600 mm Lifting height: 10,250 mm Lifting height (platform): 8600 mm Order picking height: 10200 mm Mast type: Triplex Height of the folded mast: 4460 mm Mast height extended: 11040 mm Total length of the truck (head folded): 3846 mm Forklift width: 1270/ 1520 mm Ground clearance: 60 mm Own weight (without battery): 6790 kg Battery (weight): 1760 kg Turning radius: 1698 mm Working corridor: 1760 mm Distance between shelves: 1850 mm Forks: 1200 mm Travel speed with/without load: 10/ 12 km (programmable) Lifting/lowering speed: 0.4/ 0.4 m/s Traction battery (acid): TAB Standard 48V8EPZS1240Ah + BFS Rectifier (high efficiency): Polar Q420LOG 24/ 36/ 48V, 20-180A (programming, analytics) Braking system: electro-mechanical Rollers/wheels: Vulkollan (PU) Signal generator (no wiring): included Net price: EUR 97,700 / piece without shipping and assembly/commissioning The narrow aisle forklift comes from the official distributor of Toyota Material Handling Poland. If you are interested, please contact us. Nwjdpfx Agjiyprce Noc

Year of construction: 2014, condition: used, Field of application: Construction Attachment suited for: Loaders Nwodpfx Aepa Rnpsg Nsc Selling price: € 22.500, US$ 23.690 Bucket is suitable for CAT990 and CAT992. This is the bucket we produce for CAT distributor. The customer stopped using the machine because they did not find it efficient because of fuel. They gave the bucket back and we made new bucket for their small machine. The condition of the bucket is very good. You can do a face-to-face or video review about this bucket. The price is very special price to get rid of stock cost. It will be delivered after all revisions have been made. (final control, paint etc.) Therefore,the date of ready for delivery can be thought of as 2 ±1 days. Please contact for detailed information.

Condition: as good as new (ex-display), Lubeca LW 303 line for closing Hansa type boxes, including: 1. Two Lubeca LW 303 sealing machines with a full set of production equipment necessary for work. 2. A fast clincher to feed both machines at 130 cans per minute 3. Distributor 4. Supply tapes from distributor to 1st and 2nd sealing machines: - 5 m. length - 2.5 m. length 5. Lead strip, after sealing machines: - 5 m. length Note: Gift 3rd Lubeca sealer and clincher, for spare parts. The machines are fully renovated from Lubeca manufacturer. Nsdpfx Aeh S Upmsg Njwc For more information please to send your inquires.

Condition: new, Year of construction: 2024, overall weight: 265 kg, empty load weight: 265 kg, operation weight: 265 kg, _____Basic equipment > Hydraulically driven single-chamber spreader with feed auger and spreading disc. > Spreader hopper and distributor made of stainless steel. > Dimensions (W x H x L): 1050 x 950 x 1800 mm. > Unladen weight approx. 265 kg. > Incl. tarpaulin cover. > Incl. manual operation. > Incl. rear extension. (Length determined by axle load calculation) Mounted spreader, A1201 B1050 H950 L1800 Carrier vehicle: Multihog MXC Batch/Serial number: 40941 Special equipment - Discharge welded - K-basis 2 control system, fixed wiring harness, microprocessor control in CAN-BUS technology. Regulation of all drives in a closed control loop (with feedback). Functions: - Adjust spreading width - Adjust spreading density - Beacon on/off - Work light on/off - Spreader operation/pause - Illuminated buttons and rotary controls - Data logging - Speed simulation - x2 button - Complete wiring incl. wiring harness separation - Terminal box for mounting outside the cabin Rear apron W 1500 x H 500 Yellow beacon Agitator shaft set - Improves functionality regarding bridging with damp, poor quality spreading material. Auger reversing - Allows reversing of auger direction at the press of a button on the unit in case the feed auger is blocked or jammed. Location: 54595 Prüm Nwjdpfx Agsw Ibbqs Nsc

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 02/2026, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine specification, dimensions, or further features? Feel free to contact us. We offer financing and leasing on attractive terms – also available for the Netherlands, Austria, and new ventures! ----Vehicle: Wheelbase: 4325 mm * 6-speed manual gearbox * Double cab * Twin rear wheels * Gross vehicle weight: 5.5 tonnes * 90 km/h speed limiter * Digital tachograph 4.1 Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package Nwsdjwm Tvxepfx Ag Nec * “Tempmatic” air conditioning * Cruise control * Electrically adjustable, heated and extended side mirrors * Height- and reach-adjustable multifunction steering wheel * Light sensor * 93L main fuel tank * 22L AdBlue tank * Comfort driver’s seat with armrest * Passenger double bench * 7 seats * Black leatherette seats * Electrical pre-equipment, programmable special module * Hill start assist * On-board computer with colour display * Toll system preparation * Central locking with remote control * Electric front windows * Fuel filter with water separator Safety: * All-season tyres * Reinforced front axle * Reversing camera pre-installation * Crosswind assist * Lane keeping assist * Rain sensor * Intelligent speed assistant * Reversing warning system * Fog lights with cornering function * Attention Assist * Battery master switch * Halogen headlights * Outline marker lights * Side marker lights * Adaptive brake lights * Seat belt warning system * EU underride guard Three-way tipper: * Smooth steel floor * Removable aluminium drop sides * Pendulum top-hinged and drop-down lower sideboards * Tie-down eyes fitted to bed * Steel cab guard with ladder rack * Two small toolboxes under the body * Lateral underrun protection * Wheel protection with mud flaps * Side marker lights * Tow hitch: 3.5t towing capacity (AHK ball head, 12V 13-pin trailer socket) Additional body-specific extras available at a surcharge. ----Note: Please call briefly before your visit – we will ensure your desired vehicle is on site. If the vehicle is not located in Wachtendonk, we are happy to deliver from our inventory. Bespoke bodies available upon request. Your vehicle partner since 1996. Call or email us now – we look forward to assisting you! No liability for printing or typographical errors. Subject to prior sale or error. Best regards, Pimenta Automobile

Condition: used, Year of construction: 2001, functionality: fully functional, Speed: 12,000 BPH with 0.75 liter bottles Keber depalletizer: Model: Depack 92 Year: 2001 Speed: 65 layers/hour Push type Pallet magazine Nwjdpfxjv Hrcfe Ag Nec Layer removal system Worked pallet size: imperial pallet 1000 mm x 1200 mm x 1400 mm Maximum workable pallet height: 2300 mm Pall microfiltration system: Model: Saso64gnw80j-it Year: 1998 KHS monoblock Model: Innofill um Year: 2001 Rotation direction: clockwise Speed: up to 33,000 BPH Consisting of: Rinserter 100 clamps Carousel height adjustment: automatic Fixed nozzle Number of treatments: 2 Type of treatments: water, nitrogen Filler 100 gravity taps Automatic tank height adjustment Mechanical valve Pre-evacuation Corker 20 straight cork heads Cork size: 25 mm x 48 mm Automatic head height adjustment Vacuum system before corking Inert gas injection system before corking Stelvin corker 15 heads Automatic head height adjustment Flying catch distribution system No. 2 Pneumatic cap elevator FT System bottle inspector: Model: clx-300/ce333 Year: 2001 Cap presence, level, capsule and label check No. 3 ejectors for waste on belt: 1 after monoblock for level and cap 1 after capsule distributor 1 after labeller WBeer capsule distributor: Year: 2001 Long-term storage Capsule type: PVC Nortan capsuling machine for PVC Model: Termocap 12 Year: 2002 12 heads Manual head adjustment Kosme labeller: Model: Top.Star Year of construction: 1998 Rotation direction: anticlockwise Head adjustment: automatic 16 heads Movement of plates with mechanical cam and brake/clutch system Number of stations: 4 (2 with cold glue; 2 adhesive) Number of applicable labels: 2 Suitable for applying front and back (adhesive) and front and back (with glue) Optical centering with photocells Additional ironing at bottle exit Keber bottle and carton conveyor belts: Year: 2001 Keber carton erector: Model: Formapack 3 s Year: 1997 Hot glue closing Nordson 3400v series gluer Keber carton packer: Model: Incapack Year: 1997 Speed: 400 cycles per hour Number of heads: 1 Number of grips per head: 30 can process 4 or 5 cartons (depending on the bottle diameter) 3X2 or 2 cartons 4X3 Type of heads: adjustable Keber partition inserter: Model: Insertpack Year: 2001 Number of heads: 3 can process 3 cartons 3X2 or 2 cartons 4X3 Keber carton closer: Model: Incolpack Year: 1997 Nordson 3400v series gluer Ft System carton weigher: Model: pco 150 nx Year: 2001 Belt ejection system Keber palletizer: Model: pal mec arm 98 Year: 2001 Speed: about 1.5 layers/minute Type: push Pallet magazine Lap pad inserter system Maximum workable pallet height: 2300 mm Keber pallet wrapper: Model: Volpack 095 Year: 2001 Speed: 19 pallets/hour Maximum workable pallet height: 2200 mm Wrapping type: rotary table General information: Safety guards

Condition: like new (used), Year of construction: 2024, functionality: fully functional, BRAND NEW COMPLETE KRONES CAN FILLING LINE Capacity: up to 90,000 cans per hour. Manufacturer: Krones Year of manufacture: 2023/2024 Condition: Brand new, unused, never installed, still in original packaging Availability: Immediate Electrical Voltage: 440 V Nwjdpfx Ajxc E Rwog Noc Frequency: 60 Hz Products: Beer, Carbonated Soft Drinks (CSD), Non-Carbonated Soft Drinks (Non-CSD) Filling temperature: 4ºC Compatible Can Formats: – 355ml – 204/202 – 355ml – 204 Sleek – 330ml – 211/202 – 473ml – 211/202 Secondary Packaging Options: – Tray with film – Film only – Pad with film Pack Formats Supported: – 6 x 4 – 3 x 2 – 3 x 4 Pallet Dimensions: – 1240 x 1100 mm – 1200 x 1100 mm – 1220 x 1020 mm – 1080 x 935 mm Line Composition: - PRESSANT UNIVERSAL 1A Container Sweep-off Depalletizer - CANTRONIC 709 D Empty Can Inspector - MODULFILL VODM-C 4.320-150-90 Can Filler - CHECKMAT 731 FM-X Inspection Unit - Foam Cleaning Module - LINAFLEX LC33.0-573-31 Product Treatment Unit - VARIOPAC PRO TFS-8 Shrink Packer - MODULPAL PRO 1AD Palletizer - LINADRY S2M Container Dryer x2 - CHECKMAT 731 FM-X Inspection Unit - SYNCO S Container Conveyor - MULTICO S Pack Conveyor - PALCO S Pallet Conveyor - Can Lid Feed Unit - OMEGA Stretch Wrapper - SYNCO Conveyor Lubrication System - Container Coding/Dating Unit - SYNCO Can Vacuum-Assisted Conveyor Coder - SYNCO Can/Liner Rinser – Linear Rinser - SYNCO Drip Pan Pipework System - SYNCO Can Vacuum Inspection System - Pack Inspection System - VJ 1620 UHS Pack Coding/Dating Device - Pallet Labeller - Uninterruptible Power Supply (UPS) - Electrical Power Distributor - Infield Cable Ducts and Cable Trays - Internal Machinery Piping For further information or to arrange an inspection, please contact us.

Condition: used, functionality: fully functional, Ferwood code: AGG0188 - Manufacturer code: 2-056-11-3020 - Condition: Used - Functionality: Fully operational - Compatible machine: CNC HOMAG BOF - HOMAG BAZ - WEEKE VENTURE - BHC - CENTATEQ - If interested, we offer an overhaul service, please contact us. Weight and transport dimensions: 8 kg, 46x39x27 cm. Nedpfx Ajvu Tqteg Newc

Condition: used, functionality: unexamined, Ferwood Code: RU0000078 - Manufacturer Code: 5816 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC IMA BIMA - HOMAG BAZ - HOMAG BOF - WEEKE VENTURE - WEEKE BHC - WEEKE BHP/BP - If interested we offer a revision service, contact us. Nsdpfx Ajv Azgfog Nswc

Condition: used, functionality: fully functional, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested we offer an overhaul service, contact us. Nwodjv I A Rpepfx Ag Noc