Used Vertical Cnc for sale (14,130)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Itsdpfxjx D Uz Io Aanjr Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: excellent (used), Year of construction: 2022, Machine type: CNC Vertical Machining Center Model: CMX1100V Manufacturer: DMGMORI Control: DMG MORI SLIMline® Multi-Touch Heidenhain Year of manufacture: 2022 Location: Germany Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for pull studs DIN 69872 Ijdox Dr Dyjpfx Aanstr - Direct absolute measuring system X-Y-Z - Magazine with 30 tool stations - Through-spindle coolant supply (IS) 20 bar - Double changeover filter - External coolant air-blast switching via M-function - Chip conveyor (scraper type, left side) - Tank capacity (left side chip conveyor): 250 - Coolant spray gun for chip removal - Automatic cabin roof - Signal lamp - Electronic handwheel - Probe kit for spindle and table Travel range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Floor space (L x W x H) approx. 4.04 x 2.8 x 2.95m

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Serial No.: 2219, Control unit manufacturer: Siemens, Model: Sinumerik 840D sl, 2 spindles, spindle distance: 210 mm, max. speed approx. 4000 rpm, W-axis tool spindle / grinding spindle: 2000 rpm, max. workpiece diameter: 100 mm, max. workpiece height: 40 mm, 8-position tool turret by Sauter, Model: 0.5.480.516, tool holder: Capto C5, workpiece automation device by DVS, Type: Moduline, transfer robot by Epson, PLC system control by Siemens, Simatic Panel Touch display, coolant system by Knoll, Type: KF150/950, paper band filter, chip conveyor by Knoll, Type: 225S-2/170. Itsdpfx Aaox Ahg Uensr +++ Note: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand. Itjdox Awzbopfx Aanjr

Condition: used, Year of construction: 2015, operating hours: 7,206 h, 2 x CNC Machining Centers + Accessories as a Package, Used 1. KONDIA A-6 Manufacturer: KONDIA Model: A-6 Year of manufacture: 2015 Control system: Heidenhain TNC 530 Operating hours: Itedpfxox I S Ics Aaner Spindle hours: 7,206 h Total power-on hours: 28,791 h Working area: X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Equipment: - 20-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 2. KONDIA A-10 Manufacturer: KONDIA Model: A-10 Year of manufacture: 2010 Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 11,095 h Total power-on hours: 49,429 h Working area: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 610 mm Equipment: - 40-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 3. Accessories - 2 x 3D workpiece touch probes - 1 x Tool measuring probe - 6 x GRESSEL machine vices - Approximately 150 SK 40 tool holders with tools The machines were used for the in-house production of a manufacturer specializing in automation technology. Extensive aluminum machining was carried out.

Year of construction: 2001, condition: like new (used), CNC Vertical Center MIKRON HAAS VCE 500. Control: HAAS Itodpsh D E Duefx Aanor Year: 2001

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors Iedpfx Aajw Nklhonotr - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, TECHNICAL DETAILS - Number of axes : 2 - Table dimensions : 2500 [mm] - Table rotation speed : 1.25 - 160 [rpm] - Max. turning diameter : 2800 [mm] - Maximum workpiece height : 2300 [mm] MACHINE HOURS - Number of working hours : 15557 [h] Itjdpfx Aajwbkd Nensr EQUIPMENT - CNC : FANUC Series 16i-T

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 27,300 mm, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, CNC Vertical Edge Processing Center with Integrated Single-Sided Drilling and Milling Function LiSEC, KBF-60/33 Right – Left, Year: 2016 Automatic washing and drying machine for flat glass included 400 V, 50 Hz Itodpfx Aaev Hprqjnsr In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Itjdsuy Ihhspfx Aanjr

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Brand: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Itedpfxex I S E Is Aansr Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct measuring system The machine was used in-house for the production of automation technology components. A significant amount of aluminum was machined.

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Itedpfox A Hh Dsx Aanor Number of controlled axes: 3 axes Total number of drilling spindles: 25 Total number of tool changer positions: 4

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Isdpfstrhq Hjx Aanetr Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: MAPPS IVB, _____ Description: Year of manuf. : 2019 Control : Sonstige MAPPS IVB Grinding length : 150 mm Technical Details: Grinding-ø (max.):350 mm Grindinglength (max.):150 mm Grindingwheel-ø:25-180 mm Swivelrange Grindingwheelhead (max.):230° Grindingspindle: Technology:Internalgrinding spindle Speedrange:3-20.000 rpm Power (max.):11 kW Grindingwheelholder:HSK-A63 Drillingspindle: Technologie:Drillingspindle Speedrange:1.500-3.500 rpm Power (max.):7,5 kW Taper:HSK-A63 Workpiecespindle: Technology:Directdrive Clmapingsurface:ø265 mm Tableloadiing (max.):200 kg Workpiececlamping:Pneumatic chuck In general: Movement in X/Z:965/532 mm Rapid travers in X/Z:24/20 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Z Chipmanagement:Magneticbeltconveyor Coolingmanagement:Coolant unit with Paperbeltfilter and Temperature control Workpiecemeasurement:Touch probe, Renishaw MP 250 with Master Gauge Station Iedexx Eraspfx Aanstr Toolmagazine:8 Stations (each 4 stations for Grinding- and Drillingtools) Dresser:Wheeldresser + Single point diamond (Marposs) Setup operations:Electronic handwheel Automation:Fanuc-Robot M-20iA with Stocker (30 Stations ø329 mm) Grindingmistseparation:Akamatsu HVS-100-CE 044 Further Equipment:Spindle chiller, Trafo

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Iedpfx Aajxxpblonjtr Machine is still in production and can be inspected by appointment.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Iedpfetwpamex Aanetr Parts shown by hand not come.

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Iedpfx Aaex Ecu Ejnetr

Condition: excellent (used), Year of construction: 2006, operating hours: 2,988 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 255 mm, travel distance Z-axis: 147 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 320 mm, table length: 885 mm, table load: 250 kg, overall weight: 2,450 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 2,988 h, spindle motor power: 9,900 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, FEHLMANN PICOMAX 55 CNC Vertical Machining Centre with Heidenhain handwheel, RENISHAW MP-15 probe, 60 pcs. SF 32 tool holders and 97 pcs. collets. The machine comes from the liquidation of a German company. The machine has been fully inspected and is in excellent, well-maintained condition, immediately ready for operation! The spindle runs very smoothly at all speed ranges. The guideways and spindle drives operate flawlessly. The FEHLMANN Picomax 55 2/3 CNC milling machine is a Swiss-made machine, designed for high-precision machining applications. It is optimized for micro-machining in small and medium-sized batches for tool and mould making. Condition: Very good, fully functional. Location: Graz, Austria Availability: Ex stock Technical data: Model: FEHLMANN PICOMAX 55 CNC Year of manufacture: 2006 Operating hours: Only 2,988 h Controller: HEIDENHAIN iTNC 530 Travels: X-axis: 500 mm Y-axis: 255 mm Z-axis, quill manual: 160 mm Z-axis, quill automatic: 147 mm W-axis, machine head: 500 mm Measuring system: Direct linear scale measurement on X/Y/W Clamping surface: 885 x 320 mm Speed range: 50 – 9,000 rpm Tool holder: SF32 Table load capacity: max. 250 kg Spindle power (S6, 40%): 9.9 kW Iedpfx Aaovphv Tsnjtr Machine weight: approx. 2,450 kg Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm Inclusive accessories: - 60 pcs. SF-32 tool holders (see photos) - 97 pcs. collets (see photos) - Renishaw MP15 probe - Electronic handwheel (manual control unit) - Complete machine documentation including EC Declaration of Conformity Key features: - Swiss precision engineering, extremely durable - Very well maintained, both technically and visually in top condition - Immediately ready for use - Ideal for small batch production, toolmaking, and precision component manufacturing Note: The original purchase price with this configuration was approx. €150,000. Inspection under power is possible by appointment. Contact us for further details, pictures/videos or to arrange a viewing appointment.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Travel Z: 610 mm Itsdsx Agp Iopfx Aaner Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Isdpfx Aaswukyqonetr Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Year of construction: 2022, condition: new, Offer on demand Machine is immediately available Ijdpfx Aajiw Dgienjtr

Condition: used, Year of construction: 2005, CNC 5-axis Traveling Column Vertical Machining Centre CNC Control Heidenhain iTNC 530 Table size 3600 x 1050 mm Table load 3200 kg Diameter integreated NC 800 mm Number of pallets 1x Movement X-axis 3000 mm Movement Y-axis 1000 mm Movement Z-axis 860 mm C-axis (table rotation) 360° B-axis travel +/- 105° Spindle speed 9.000 R/min Iedpfx Asxx Ubqjanstr Spindle taper DIN 69871-SK 50 Spindle motor 46/40 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10614 Manufacturer: CHIRON Type: FZ 18 K Year of construction: 2001 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 400 mm Z-Travel: 630 mm Table surface area (LxW): 970 x 470 mm Tool Taper: SK40 Tool places: 40 Max. Tool Length: 280 mm Max. Tool Diameter: 78 mm Max. Tool Weight: 8 kg Iodpfx Ajxvw Saoanstr

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Iodpfx Aaoxwycdsnotr

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Iodjxvw Hkspfx Aanetr Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.