CNC Vertical Machining Center

Haas VF3 B

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Nwodpfx Afjvw Uqajqop Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073 Nwedpourfz Iefx Afqep  

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Nwodpjt E Hvgjfx Afqop Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 800 mm control FANUC Series 31i Model B spindle passage 76 mm turning speed range - drive spindle 3500 U/min drive capacity - spindle motor 40/25 kW Nwedpjw U U Idsfx Afqsp max. torque on the spindle 864 Nm Number of tools 16 St. tool adaptor BMT rapid traverse 30 m/min dimensions 2,9 x 2,1 x 2,25 m weight of the machine ca. 6,5 t Used CNC- lathe with boxway system in very good condition Only 9.100 h power on. - 3- jaw chuck Ø 315 mm - chip conveyor - some tool holders - tailstock programmable - oil dust collector -"Build In" motor

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Nwedpfxsv Sut Re Afqep

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch Nwodpfx Afstv Rh Aeqop - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front - Side + rear protective device - Operating instructions

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp Njdpfx Afoiwfp Teqjwp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Nwsdpexflr Hsfx Afqep Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Nwjdpfx Afsxddrpoqop Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2007, Machine is in good condition, Nwodpewk Nm Ijfx Afqep Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm