Used Machining Center Vertical for sale (71,677)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. Bedpfxoz Il Rro Aktolp External reference: Wup - Lot 16

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Blodpfx Aez Il Nzjktjp Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Bjdpfx Akoz Il Hajtelp Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 25

Condition: used, Year of construction: 2000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Control system CNC control: Heidenhain TNC 410 Blodpfxez S Nize Aktep Work table Table size: 1,550 × 600 mm Design: continuous table for longer workpieces Tandem operation: possible with a dividing screen Feed rate and rapid traverse Feed rate range: 1–30,000 mm/min Rapid traverse: 45 m/min Spindle and tool holder Spindle speed: 40–8,000 rpm Tool holder: ISO 40 Tool changer Tool changer: 30 positions Performance data Total power consumption: 20 kVA Machine weight: approx. 9 tons Dimensions Space requirement: approx. 4.2 × 2.3 × 2.7 m EQUIPMENT Continuous work table Dividing screen for tandem operation 3 additional clamping tables Tool changer with 30 positions Heidenhain TNC 410 CNC control

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Dimensions & Weight Blodpfx Akjz Il E Aetep Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS Bodpfe Afwwbex Aktslp X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Machine weight: approx. 3,200 kg EQUIPMENT 16-position tool changer Various accessories

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: B5607, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 410, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Bledpfx Aj Afwzgektep Table length: 1,120 mm Table width: 600 mm Spindle speed: max. 6,000 rpm Tool positions: 18 MACHINE DETAILS Control system: Heidenhain iTNC 410 Internal coolant pressure: 20 bar EQUIPMENT Electronic handwheel 18-position tool changer Internal coolant supply Chip conveyor

Condition: used, Year of construction: 2011, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 360 mm, controller model: FANUC 31i-A5, spindle speed (max.): 10,500 rpm, TECHNICAL DETAILS X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Distance from spindle nose to table: 200–560 mm Rapid traverse rate X/Y/Z: 60 m/min Spindle speed range: 36–10,500 rpm Spindle power: 30–35 kW Tool holder: HSK-A63 Number of pallets: 2 Pallet load: max. 450 kg Magazine capacity: 2 × 21 Tool diameter: max. 88 mm Tool diameter with free neighboring positions: max. 125 mm Tool length: max. 250 mm MACHINE DETAILS Bjdpfx Aj Agfrwjktjlp CNC control: FANUC 31i-A5 Dimensions & Weight Machine weight: 5,300 kg Overall dimensions: 3,200 × 3,250 × 3,245 mm EQUIPMENT Chip conveyor Paper filter High-pressure coolant pump Tool setting 4-axis table, 1 piece

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT Bledpj Afxrqjfx Aktsp 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 580 mm Bledpfx Aj Afxygektsp Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Tool positions: 20 Tool holder: BT 40 MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SEICOS Σ10M / A10M, table load: 750 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table length: approx. 1,120 mm Table width: approx. 485 mm Table load capacity: max. approx. 750 kg Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Number of tool positions: 30 MACHINE DETAILS Blsdpfs Afwvljx Aktep Control system: SEICOS Σ10M / A10M Machine weight: approx. 6,500 kg

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Bledpfxs Agfr Es Aktep Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Bodpfx Aj Aggibektslp Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: ready for operation (used), operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Bjdpfj Agu Spsx Aktslp Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Bodpfj Aa Aqtex Aktelp Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: excellent (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC 530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 700 mm Bsdpfx Ao Afwxzoktelp Z-axis travel: 750 mm Spindle speed: max. 8,000 rpm MACHINE DETAILS Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 5,233.8 h Machine operating hours: 13,455 h Control system operating hours: 17,705 h

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, CNC milling machine, type Fadal VMC15, model 914, for sale. The milling machine is in perfect working order and is currently still in use. A functional video is available upon request. Includes a PC for the CNC programs. - Travel in X: 500 mm - Travel in Y: 400 mm Bsdpfx Ao Ahi Uhjktslp - Travel in Z: 500 mm - Spindle speed up to 7,500 rpm - SK-40 tool holder - Table area 750x400 mm - 10-position tool changer Loading will be done with a forklift. Please feel free to contact us if you have any questions.

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Blodpfsx S I Iaox Aktop

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Bledpfx As Agwx Nektop Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Bedpfxsx N E Acj Aktslp Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation.

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Bodpo Ahn N Ujfx Aktjlp Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Bledpfx Aj Afxn Ssktep Renishaw probing system Coolant system Chip conveyor

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Vertical CNC machining center Chiron Mill 2000 Control system: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine number: 82 Bedpo Agghdjfx Aktjlp Travel ranges: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Clearance diameter: approx. 1,150 mm Tool holder: HSK-A63 Tool magazine: 40 positions Spindle speed: 50 - 12,000 rpm Accessories: - NC rotary table with spindle - Water-cooled motor spindle - Integrated rotary table, Ø 500 mm - Measuring probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 - 2 flushing nozzles

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: L2TAF0101, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, total height: 2,500 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 450 mm, table length: 860 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, input voltage: 400 V, input frequency: 50 Hz, Equipment: chip conveyor, documentation/manual, LEADWELL V-30 iV CNC Vertical Machining Center - Tool holder: BT 40 - Table with three T-slots - Includes documentation and chip conveyor The machine is equipped with a tool changer, including the tool holders from the changer. Bledpo Afuu Ijfx Aktep FCA D-94227 Zwiesel – loaded onto a truck.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, Equipment: documentation/manual, - Year of manufacture: 1994 - First owner, used in our own operations - Fully functional, under power, ready for demonstration - Control system: Fanuc 0MC - Working area X-axis: 1300 mm - Working area Y-axis: 650 mm - Working area Z-axis: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm Bjdpfx As Ahhcrjktslp - Spindle speed range: 20 - 6000 min-1 - Rapid traverse rate: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 positions - Machine weight: 13000 kg - Serial number: 308 Net price, unloaded ex-works at the Luckenwalde location (Germany), excluding transportation. Loading by an external service provider is possible for an additional charge of EUR 1,300.00. Sale only within Germany or the European Union!