Used Vertical Slicer for sale (7,837)

Condition: like new (used), Year of construction: 2023, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 20240104, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Heidenhein iTNC 640, spindle speed (max.): 10,000 rpm, For sale is a vertical machining center with only 2,509 program running hours (as of September 15, 2026)! The machine is in first-hand condition and was assembled directly by the manufacturer! Inspections or test machining are possible at any time by arrangement. TECHNICAL DETAILS Travel in X-axis: 1,600 mm Travel in Y-axis: 800 mm Travel in Z-axis: 800 mm Rapid traverse rate X-axis: 32 m/min Rapid traverse rate Y-axis: 32 m/min Rapid traverse rate Z-axis: 32 m/min Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg Number of spindles: 1 Spindle speed: 1 – 10,000 rpm Speed control: stepless Spindle motor power: 37 kW Tool holder: SK 40 Mounting diameter: 40 mm Torque: 235.5 Nm Iedpfx Asz Arkkehnotl Air through the spindle: available Tool magazine positions: 60 Tool changer: operable from the front MACHINE DETAILS Control: Heidenhain iTNC 640 Internal cooling: 20 bar Filter unit: band filter unit Input voltage: 380 V Input current type: three-phase Program running hours: 2,509 h (as of September 15, 2026, machine is currently still in operation) Dimensions & Weight Dimensions (L x W x H): 5,800 x 4,300 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT CE marking Chip conveyor Documentation/Manual Glass scales in all 3 axes Hexagon 3D infrared probing system Mobile electronic handwheel Internal cooling with 20 bar and band filter unit Air through the spindle Tool changer with 60 positions, operable from the front

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm 1.020 x 510 mm WINMAX 12.000 U/min 13,5 kW 24 St. SK 40 | | 20 bar 35/35/30 m/min 5,0 t Ijdpfxsznnc Tj Ahnjtl used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Iodpfxjzlbx Ns Ahnetl Pro)

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Itjdsx Ehi Ispfx Ahnol Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 Itjdpfx Aex Anlwehnjl WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm CNC Control : Fanuc 30i

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. Itedpfxoq Nd U He Ahnjl 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Isdjxgk Nmepfx Ahnstl Control : Heidenhian Spindle 12,000rpm Taper : BT40 ATC 30

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Itedpfszwxz Ejx Ahnel Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, turning height: 2,200 mm, turning diameter: 4,000 mm, faceplate diameter: 3,100 mm, table diameter: 3,100 mm, workpiece diameter (max.): 4,000 mm, FULLTONTECH CK5240 CNC vertical turret lathe, year of construction 2016. The machine was purchased new by us in 2016 and is offered for sale by the first owner. It is equipped with a Siemens control and has a double turret: one side CNC-controlled, the other side manually operated. Technical data: - Faceplate / chuck diameter: 3,100 mm Itedpfxsz Anr Dj Ahnsl - Max. internal clamping / turning diameter (X): 4,000 mm - Machining capacity (Y): 2,200 mm - Control: Siemens - CE marked Well maintained, in full working order and ready for immediate delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 2,200 – 100 • Continuous work table • Lateral and bottom reference stops Itjdpjz Dp Rbofx Ahnsl • Gantry machine with Gandry system – Dual motorization • Milling unit with 4-axis electrospindle, HSD brand • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 2,200 mm • Continuous working table • Lateral and bottom reference stops • Gantry machine with Gandry system – Dual motorization Isdpfsz Dp Exex Ahnjtl • Milling unit with 4-axis electrospindle, HSD brand • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm MAX TURNING DIAMETER: 2800 mm SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min Itedpfxoyyrh Ho Ahnel TOOL MAGAZINE: BASKET-TYPE ; TYPYE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; AUTOMATIC DOOR ; HEAD COOLING SYSTEM ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: used, 20-position tool changer Operating hours: approx. 5,886 hours Itsdpezz Hqvofx Ahnol Footprint: approx. 1700 x 2500 x 2700 mm

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Table load capacity: 1,000 kg T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Itedpfx Ahjzz Hnuonol Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Itedpezz Hl Tofx Ahnol Peak force: 37 tons Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Spindle power: 18.5 kW Spindle speed: 12,000 rpm Itjdpsylnxkefx Ahnjl Tool changer: 30 positions IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling system: Yes

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Itjdpszrkycsfx Ahnsl Tool height sensor on the table

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Ijdpfxszpynko Ahnjtl Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: used, DECKEL MAHO DMU 60T HEIDENHAIN 426 Isdpfx Ahjwg Df Dsnstl – worktable dimensions (length x width): 900 x 500 mm – table load: 350 kg – maximum feeds in the X/Y/Z axes: 600/525/ 500 mm

Condition: used, Year of construction: 2012, Feeler NBP 1300A Year of manufacture 2012 X-axis travel 1300 mm Y-axis travel 610 mm Z-axis travel 600 mm Itedpfxsww Inds Ahnjl Table 1500x600 mm Spindle 12,000 rpm BT40 Spindle coolant Heidenhain TNC 530 control

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Iodpsytfn Sjfx Ahnstl Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: used, Year of construction: 2018, operating hours: 287 h, machine/vehicle number: 0672, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: Haulotte Ijdpfx Ahoz Dc Rhjnjtl

Condition: used, Year of construction: 2019, operating hours: 314 h, machine/vehicle number: 1653, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: Haulotte Itedpfx Ajzcbgcjhnsl

Condition: used, Year of construction: 2019, operating hours: 312 h, machine/vehicle number: 3542, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: Haulotte Isdpfxszcbi Do Ahnstl

Condition: used, Year of construction: 2019, operating hours: 200 h, machine/vehicle number: 2782, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: Haulotte Iedszca N Nspfx Ahnetl