Used Voortman for sale (22)

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm Hodpfx Afjzy Sqfstsfl PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Hsdpfx Asxp Rb Ioftefl

Condition: ready for operation (used), Year of construction: 2013, cutting speed: 12,000 mm/min, total width: 2,000 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: BECKHOFF, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. Hfjdpfx Ajzd Abpeftol - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads

Condition: used, Year of construction: 2009, functionality: fully functional, Dimensions of the grommet opening Max: 1.600 x 600 mm Max. weight : 1,100 kg/m Hjdpfxszp D R No Aftjfl Min. weight per piece : 30 kg Suitable for: : 1,000 x 300 mm

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-240014, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,200 mm. This CNC-controlled Voortman VB 1050 bandsaw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle. Hjdpfx Asyr Hqreftsfl For recommissioning, a new safety system must be procured and implemented in accordance with the local conditions (hardware & software; not included in the scope of delivery!).

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-260009, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,200 mm. This CNC-controlled Voortman VB 1050 bandsaw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. Hfedpsyr Hp Iofx Aftol A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle. For recommissioning, a new safety system must be procured and implemented in accordance with the local conditions (hardware & software; not included in the scope of delivery!).

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i • Max plasma thickness: up to approx. 70 mm • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment Hodpfx Afoyu Th Ajtofl • TEKA Filtercube 4H extraction unit (filter system)

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, working width: 22 mm, cutting force: 183 t, working length: 500 mm, TECHNICAL DETAILS Shearing force: 1,800 kN Flat material capacity: 500 x 22 mm Square profile capacity: 150 x 150 x 15 mm EQUIPMENT Counter Numbering system Hodpeyyb Hrjfx Aftjfl

Condition: excellent (used), Year of construction: 2009, Year 2009 Hfedpew D Uqfsfx Aftel VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Hjdpeq Hgg Usfx Aftefl ■ Safety devices (safety bumpers) ■ Year of construction 2007

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm. Hfjdpfx Afstp Dhpjtjl  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Hsdpfxjvpafys Aftofl Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) Hfsdpfx Afovpalaotsl ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: reconditioned (used), Year of construction: 2007, Operating range VB750 Min. / max. height 10 – 450 mm Min. / max. width 50 – 750 mm Sawing machine Capacity (h x w) 0° 450 x 750 mm Hedpfxjw Nyu Sj Aftofl Capacity (h x w) +/- 15° 450 x 700 mm Capacity (h x w) +/- 30° 450 x 620 mm Capacity (h x w) +/- 45° 450 x 480 mm Capacity (h x w) +/- 60° 450 x 300 mm

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System Hfjdpfslff H Ejx Aftsl

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Hjdpfx Aeq Hu H Rjftjfl Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). Hfodpfx Aswphgdsftel · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Hjdpfx Asv U Ea Hjftefl

Year of construction: 2012, condition: excellent (used), 3 Spindle. 21 Metres of In‐feed rollers. 21 Metres of Out‐Feed Rollers. 1.25 metres Sections. Roller Feed measuring. Cross Transfers. Hfedpfx Afeh Rrxpjtol

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) Hfodoy E Nykopfx Aftsl ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Hfsdpfx Afey E Nxgetjl Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Hfedpfxozcfpze Aftjl Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)