Used Vsd for sale (102)

Condition: excellent (used), Year of construction: 2011, operating hours: 63,203 h, functionality: fully functional, 90 kW with 13 bar and 17.07 m3/min. Frequency-controlled. Hnedpfxjwd Emqe Aabou

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Technical data: YEAR: 2017 CAPACITY (kW): 15 OUTPUT (m3/min): 2.51 CIS (bar): 12.75 HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes Hedpfx Asv Drrboabenu

Condition: excellent (used), functionality: fully functional, overall weight: 1,830 kg, Year of construction: 2011, Air compressor Brand Atlas Copco Model GA75VSD FF Year of manufacture: 2011 Maximum working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotation speed: 2975 rpm Hnsdpfjv Nw A Aex Aabeu Weight 1830 kg Dimensions 2300x1100x2000 mm Air dryer Atlas Copco Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Condition: excellent (used), Year of construction: 2002, Screw compressor ATLAS COPCO GA50VSDFF machine after service, with inverter and air dryer Technical data: Hnsdpfx Ajrxtd Njabou capacity: 9.27 m3/min; 50 KW motor,; 12.8 bar max pressure; year;2002 mileage;15194h 24500 net 30135 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Hnjdpfx Aevx Nmfsabou Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Year of construction: 2017, condition: like new (used), machine/vehicle number: API801175, Item number MA1131 Manufacturer Atlas Copco Type AQ22VSD Year of manufacture 2017 Hjdpfjh Ed S Sox Aabenu Machine no. API801175 Length [mm] 2000 Width [mm] 1050 Height [mm] 1500 Weight [kg] 800 Connected load 380 V / Operating hours [h] As new 76 operating hours Gear [rpm] 6700 Equipment The compressor is water-cooled and the air is absolutely oil-free Operating instructions ,New price 56350€, special price 27500€

Condition: like new (used), Year of construction: 2018, operating hours: 24,655 h, functionality: fully functional, Atlas Copco GA45VSD+FF premium screw compressor. 45 kW at 13 bar and 9.40 m3/min. Built in 2018 with approximately 24,000 hours. Integrated dryer. Frequency-controlled. Hjdpfx Aaov Th T Tebonu

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA22VSDFF screw compressor with inverter and air dryer after service Technical data: capacity: 4.22 m3/min; Hnsdpfev Uywtsx Aabou 22 KW engine; max pressure 12.8 bar; year; 2011 mileage; 8147h!!! 24200 net 29766 gross Fully functional compressor, ready to work, warranty we provide service.

Condition: excellent (used), Year of construction: 2005, Screw compressor ATLAS COPCO GA50VSDFF machine after service, with inverter and air dryer Technical data: capacity: 9.27 m3/min; 50 KW motor,; 12.8 bar max pressure; year;2005 mileage;15194h Hnsdpsri Rnfofx Aabou 27500 net 33825 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2018, ATLAS COPCO GA75VSD+FF screw compressor machine with inverter, air dryer after service Technical data: capacity: 15.9 m3/min; 75 KW engine; max pressure 12.75 bar; year; 2018 Hnsdpfx Aev Uytbeabou mileage; 2779h!!! 82500 net 101475 gross (the machine has dents on the side covers) The compressor is fully functional, ready to work, warranty we provide service.

Condition: excellent (used), Year of construction: 2002, Screw compressor ATLAS COPCO GA50VSD machine after service with inverter Technical data: capacity: 9.18 m3/min; 50 KW motor,; Hnsderxtddepfx Aabou 13 bar max pressure; year;2002 mileage;14276h 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2004, screw compressor ATLAS COPCO GA90VSDFF 90Kw Screw compressor ATLAS COPCO GA90VSDFF machine with inverter and air dryer after service Technical data: capacity: 15.98m3/min; 90 KW motor,; 12.8bar max pressure; year;2004 mileage;16479h!!! Hnedethg Adepfx Aabju 41500 net 51045 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA22VSDFF screw compressor with inverter and air dryer after service Technical data: capacity: 4.22 m3/min; 22 KW engine; max pressure 12.8 bar; year; 2011 mileage; 8347h!!! Hnjdpfx Aev Uyursabsu 24200 net 29766 gross The compressor is fully functional, ready to work, warranty we provide service.

Condition: excellent (used), Year of construction: 2003, Air Compressor Atlas Copco Type: GA 18AFFVSD Hnjdpoww Nv Njfx Aabsu Year of manufacture: 2003

Condition: used, Lot consists of: (1) Compressors Technical Details: Hodpfxexf Ayzj Aabenu ATLAS COPCO • 3x Turbo Compressors ZH 7000-6-7 (2007) • 3x Refrigeration Dryers FD 200 VSD, frequency-controlled (2007) • Compressor Control System ES 130 T • 2x Pressure Vessels Lohenner GmbH 10,000 L, 11 bar (2007) • 2x Rotary Lobe Blowers Kaseser FB 620C (2007) incl. filtration system. Available for pick-up only from February/March 2026 – Equipment remains in operation until then.

Condition: used, Year of construction: 1999, Used TECHNE 4000TWIN HDPE Blow Molding Machine up to 1805 bph Technical Parameters and Features of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE is equipped with a double station and eight cavities (4+4) and a center distance of 102.5 mm. The used TECHNE 4000TWIN blow molding machine specifically processes HDPE (High-Density Polyethylene) in a single-layer configuration. Furthermore, the machine efficiently produces up to 1805 bph (bottles per hour). Demonstrating a 94% efficiency rate as verified by the FAT parameter. Production and Efficiency This HDPE Blow Molding Machine TECHNE cycles through production in approximately 15 seconds. It is subject to a +/- 1% variation. Moreover, it consistently produces around 43,320 bpd (bottles per day). Allowing for a +/- 5% fluctuation. Additionally, a 59 kW DC motor powers its extruder, which has an 80 mm/25D diameter and supports an HDPE output of roughly 160 kg/h. Additional Technical Details The Used HDPE Blow Molding Machine TECHNE 4000TWIN up to 1805 bph requires a total power installation of 157 kWh and consumes an average of 63 kWh. Consequently, a hydraulic system exerts a clamping force of 135 kN on the mold, controlling the blow pins, clamping, and carriage movements through proportional valves. In addition, levers and a strategically positioned hydraulic actuator facilitate mold closing. Optimizing the diffusion of clamping force across the mold-holder plates. Control and Automation of the HDPE Blow Molding Machine TECHNE Operators can regulate and monitor machine of the HDPE Blow Molding Machine TECHNE operations through a Microset Moog control panel, ensuring precision and ease of setup. Similarly, the parison cutting system employs linear cold blades. Meanwhile, a pneumatic pick and place system automatically removes bottles. Also, a single cylinder controls the parison thickness in a closed loop, offering weight control and independent profile adjustments for each head via screen monitoring. Importantly, a single pneumatic actuator performs both upper and lower deflashing. Power Supply and Year of Manufacture Built in 1999, the machine operates on a 400 Volt, 50 Hz, three-phase power supply, facilitating smooth integration with existing industrial setups. Therefore, the TECHNE 4000TWIN stands out as a durable and effective choice for professionals in the bottling industry seeking a high-performance solution for processing HDPE containers. Ultimately, this machine represents a reliable and cost-effective investment in manufacturing efficiency. Optional Accessories: Grinders for scraps TRIA mod. BM 5030 S Linear conveyors for scraps Hnjdpfx Aasvgvpcobeu Angled conveyors for scraps MOTAN complete feeding system for machine mod. 4000TWIN Leak testers for machine 4000TWIN Conveyors group and parts for bottles receiving and moving Chiller Industrial Frigo mod. GR1AC160 Air compressor Atlas Copco mod. GA 75 VSD+ FF 8153 3258 35

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Hnsdpfx Aoimz Uasabou Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Year of construction: 2009, condition: excellent (used), Grasso Screw Unit Amonia with 250 KW motor,VSD start/6000rpm Compressor: SAB 159 M - renewed 2022 with oil cooler watercooled and control panel Cap.= 432,7KW at -16C°/+35C° Maintanance through JCI Hjdpfxspvizzj Aabenu

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Characteristics: Hedpsvyq Rnjfx Aabjnu Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: excellent (used), Year of construction: 2014, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed (inverter) Motor 75 kW Capacity 12.88 m³/min Pressure 10 bar Year of manufacture 2014 Compressor in full working order. Hjdokyuyzepfx Aabsnu

Condition: used, Year of construction: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) 60 rinsing nozzle 80 filling valves 15 capping heads Product: Water Container material: PET Neck format: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of delivery  Compressor: Atlas Copco ZD2300VSD (2009) Blowing machine: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013) Hnodpfx Aaewqpgzsbeu

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Hnsdpfxjwyf Nws Aabou Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings.

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Hsdpfx Aevu A Hdeabenu Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: new, Compressor screw Manufacturer: Atlas Copco Hnjdpfx Ajvi Hbheabju Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece

Condition: excellent (used), Year of construction: 2013, operating hours: 1,180 h, functionality: fully functional, cooling capacity: 249 kW (338.55 HP), Cooling cap.249 KW (73 refr.tons), 1 circuit with 1 screw compressors, with VSD drive with Plate evaporator, R 134A Hedpfx Aaevfcqqsbsnu Colling down to -10C° water/glycol out. with integr. pump built in Container frame ready for operation