Used Warm Hold Counter for sale (14,020)

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. Bodpfjwb A Hijx Abzsww With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2021, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, operating pressure: 8 bar, input frequency: 50 Hz, Automatic linear electro-pneumatic counter-pressure filling and capping machine GAI MLE 661-BIER, including rinser, feed conveyor, and automatic labelling machine ENOS, for approximately 1,350 bottles per hour. The machine is configured for Longneck 33cl bottles and is fully functional. The machine is currently powered, well-maintained, and in productive use (availability by arrangement, decommissioning scheduled no later than the end of 2025). An on-site inspection can be arranged by appointment. Bwedpfxewx Hzxe Abzjw

Condition: refurbished (used), Technical data Metal base, Control cabinet, Control panel, Siemens brand, The operator can see all necessary information on the touch screen, Long service life, Bsdpjt Ibgrsfx Abzeww Can be synchronized with all packaging machines, works in line with carton packaging machines, with bag applicators and/or vertical packaging machine (VFFS), Product contact parts are made of stainless steel or food grade plastic, Available with 2, 4, 6 and 8 channels. Each channel is equipped with a backlash-free eccentric drive, Simple operation.

Condition: used, Year of construction: 1988, machine/vehicle number: 1686, Zähler für Falzmaschinen - Counter for Folding machines Gremser VZG 10-4Year 1988 - Serial-No. 1686 with pulserless - to move Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bwodpfx Aoh Ax A Ajbzjw

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Bedpfx Abewi Suljzsww Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Weight 500 kg Total power requirement 1 kw Bwsdjvz Hq Tjpfx Abzsw

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Bwodpfxswb Axro Abzjw You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2008, Capacity: 360 Bo/h Filling points: 6 pieces Voltage: 230 V Compressed air: min. 6 bar Length: 1590 mm Bedpovcqhrefx Abzjww Width: 700 mm Height: 1875 mm Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L Base construction: Steel rack Features: inlcuding add-on parts, filling programm modifiable

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool Bodpfxocwn Euj Abzoww -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Total power requirement 1,2 kw Bedjvz Hq Hepfx Abzsww

Condition: good (used), 3-section refrigerated counter with sink This Tecnodom refrigerated counter has a temperature range of 2 to 10 °C. Bodow N Nhnjpfx Abzjww The temperature is easy to read on the display. The refrigerated compartment is ideal for storing 1/1 GN containers. Convection cooling Automatic defrosting, tropicalized design 5 x drawers for 1/1 GN containers 1 x sink 235 x 330 x 180 mm 1 x door with 2 1/1 GN grids Raised edge: 100 mm Designed for external condensing unit Specifications: Dimensions WxDxH 1870x700x 870 mm Net weight: 104 kg Net capacity: 460 l Operating temperature 2 / +10 C Gas type: R507 Power: 495 W Power supply: 230-1-50/60 VP-Hz You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 45 mm -Dimensions: 155/90/H150 mm -Weight: 6.3 kg Bwjdpfod N Siksx Abzow

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Weight 1400 kg Bsdpfx Absvz Hqyezoww Total power requirement 4,5 kw

Condition: used, High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available Bwedpfx Aeh Db H Dobzsw -Price: per package -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Bjdpfxevz Hqte Abzsww

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 265 by 215 mm by 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece Bwodjd Aqtuepfx Abzjw -Dimensions: 390/130/H260 mm -Weight: 30 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Bsdevz Hqmepfx Abzoww Total power requirement 0,5 kw

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos Bedpfxob A Tc Ho Abzeww -Dimensions: 290/90/H225 mm -Weight: 12 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1700x2550 mm Weight 1200 kg Total power requirement 2 kw Bwedpjvz Hqgjfx Abzow

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm -Bore: Ø 56 mm Bjdpfjfibh Aex Abzsww -Number: 2x counter bearings available -Price: per piece -Dimensions: 260/160/H150 mm -Weight: 10.7 kg/piece

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Bedpfxsvz Hhxj Abzsww Weight 650 kg Total power requirement 1,05 kw

Condition: used, High speed counter 25/500 kHz, PLC control, counter module -Manufacturer: Siemens, Simatic S5 IP 240 counter modules -Type: 6ES5 240-1AA11 -Dimensions packaging: 210/275/H40 mm Bjdpjhzh Eljfx Abzoww -Weight: 0.6 kg

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos Bwsdpoc Ih S Asfx Abzew -Dimensions: 330/90/H220 mm -Weight: 13 kg

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 141 by 175 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 250/70/H205 mm Bwedpfx Ajd D Nfnebzew -Weight: 12.2 kg

Condition: used, Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Swallowtail: 102 by 126 mm by 20 mm high -Drawing: in the photos -Number: 1x counter bearing available Bjdpod Ebptefx Abzsww -Price: per piece -Dimensions: 180/70/H140 mm -Weight: 6.9 kg