Used Waterjet Cutter for sale (2,945)

Condition: used, Year of construction: 2013, operating hours: 4,400 h, For sale is a waterjet cutting system, STM WS 4020, in good condition, with a simple design, including a BFT Ecotron 40.37 high-pressure pump. Nedpfxjz Rkn Ae Akmedc

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy Ndjdpfez H Smwox Akmjc ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included Nedpfx Aks Ad I U Esmodc SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: good (used), Karl Tranklein EK-100 Corner Rounder Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades with a 12 mm radius is included. Stack height: 100 mm Ndsdpfxsz Rk Rqs Akmec Weight: 130 kg Cycles per minute: 50 cycles/min Power supply: 400 V Waste is directed outside the machine to the chutes. This is the model currently in production.

Condition: used, Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement. Ndedpfx Akj Ad Nrfjmjc

Year of construction: 2008, operating hours: 2,893 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0390062, Equipment: CE marking, YAWA MW1050 YA – High-Quality Machine in Very Good Condition YAWA MW1050 YA in very good condition, available for sale. Ndjdpfjz Hkm Njx Akmsc This YAWA MW1050 YA has been well maintained and carefully operated throughout its service life. The machine has only been used for a few hours per day on average, making it an attractive opportunity for a buyer looking for a well-preserved and reliable machine. The machine is in very good overall condition and is ready for continued production. It has been operated in a professional production environment and has received regular maintenance and care. Machine highlights: Manufacturer: YAWA Model: MW1050 YA Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for immediate continued production Inspection possible by appointment This is an excellent opportunity to acquire a well-maintained YAWA MW1050 YA with relatively low usage and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine 30HP pump (22kW) Abrasive tank 1000 kg. In continuous operation, serviced every 500 hours. Ndsdpfx Asyglpcjkmec

Condition: used, Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible. Ndedpfs Adt Htex Akmsc

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) Nedpfxsx Ap A Ro Akmjdc ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) Nsdpfx Ajwq Rhmekmjdc The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Ndodpewxar Dsfx Akmsc Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Year of production 2014. Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included. Ndsdpfsz N Sh Uex Akmjc

Condition: good (used), Tranklein EH I corner cutter Made in Germany. Perfect condition. This is a professional device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 4 mm is included. Stack height 55 mm Weight 32 kg Ndjdpfoz N Si Sox Akmsc This is the currently produced model.

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Ndedpev Hcblofx Akmec Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: safety light barrier, Offer includes: Polar 115 X, manufactured in 2007, including spare blades and side air tables. Ndjdpfjz Nz Tyjx Akmec

Condition: excellent (used), functionality: fully functional, working width 3100 mm Ndodpfx Ajzxp Raekmjc working height 47 mm manual fence adjustment to size main motor power 4 kW cast iron body safety light barriers power supply 380V

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Njdpfxsz N Sfmo Akmodc Discharge of scrap from under the machine directly to the container.

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Ndodoxbx R Uspfx Akmsc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Nsdpfx Aezu R T Iekmodc Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: ready for operation (used), Year of construction: 2019, table length: 3,000 mm, table width: 1,500 mm, number of axes: 3, This 3-axis ECKERT OPAL WATERJET was manufactured in 2019. It features a spacious work table measuring 3000 x 1500 mm and can cut materials up to a maximum thickness of 150 mm. With a travel speed of 25000 mm/min, this machine is designed for efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the ECKERT OPAL WATERJET machine we have for sale. Contact us for further details. • Maximum cutting thickness: 150 mm • Minimum cutting thickness: 0.5 mm • Travel speed: 25,000 mm/min • Positioning accuracy: ±0.025 mm Ndjdpfx Aoz R Tycjkmjc • Power supply: 230 V; 50 Hz

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Ndedpoz Suafsfx Akmjc MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Njdpfewxza Njx Akmsdc Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, NC Universal 5-Axis Tool-and Cutter Grinder Walter Helitronic Power Technical details: CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Ndede Aawiqopfx Akmoc Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Nsdpfxeyk Tuuj Akmjdc Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Ndodpfxez Suaro Akmjc Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate