Used Waterjet Sweden for sale (352)

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 Gsdpfxszza Dij Akaokb - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning Gkodpfx Akog N Nlvjaob iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control Gjdpeyclvnofx Akaekb - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,800 mm, number of axes: 3, This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details. - Maximum Material Thickness: 100 mm (via adjustable Z-axis)- Operating Hours: 30,192 hours- Included Additional Equipment: Uhde HPS 4022 high-pressure pump, second worktable for continuous loading/cutting workflowHigh-Pressure Pump Specs (Uhde HPS 4022):- Pump Manufacturer: Uhde High Pressure Technologies GmbH (ThyssenKrupp)- Pump Model: HPS 4022- Design Discharge Capacity: 2.3 l/min- Design Pressure: 4000 bar- Plunger Diameter: 19 mm- Stroke Length: 182 mm- Motor Rated Output: 22 kW- Pump Weight: 1080 kg- Pump Operating Hours: 30,192 hours Godpjzy Hqaofx Akaekb

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total width: 155 mm, total length: 120 mm, total height: 515 mm, volume flow: 8,600 m³/h, Filtercapacity: 4.300 - 8.600 m3 per hour Filtering and collecting Smoke & Dust Country of origin: Sweden Total size LxBxH: 120 x 155 x 515 cm Weight: 1000 kg Godpfx Aezzf Akskaekb

Condition: used, Year of construction: 2005, functionality: fully functional, power: 6,000 kW (8,157.72 HP), tank capacity: 22,070 l, Sale together with the building. Year of construction 2005 Supplier - JÄRNFORSEN Capacity - 6 MW Fuel - Bark, dust, chips (wet) Design pressure - 6 bar Design temperature - 165°C Flue gas temperature - 200°C Supply temperature - 120°C Return temperature - 100°C Boiler efficiency - 85% Dust emission - 100mg/Nm3 CO-content - 200 ppm Nox -content 85 mg/MJ Gjdpfeyyznvex Akaokb Yearly production - 22 000 MWh Estimated fuel consumption ~50 000 m3 per year

Condition: used, Year of construction: 2019, Leadwell Vertikal Flerop BC-700T Fanuc 0i-MF controller with 10.4" LCD Chip conveyor + bucket Transformer Without linear scale Pallet package CTS function Gkjdpfjx Hfx Sjx Akaeb Air gun / Water gun HSK63 tooling system 12000 rpm spindle CE4 20 bar high pressure pump Automatic workpiece measurement OMP-60 Auto tool length measurement NC-4 Oil skimmer Auto door Network connection Spindle coolant ring X axis: 1300mm Y axis: 610mm Z axis: 610mm vertical / 750mm Horizontal Distance from table top to spindle end : 110-750mm Table LXW: 1480x610mm 600mm rotary table C Axis speed: 120-800Rpm Tool storage capacity: 30pcs

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid, Sweden Type: 1535 Gkedpfx Akoztfkxoaeb Dimensions of the grinding chamber: 350 x 150 mm Power: 4 kW New blades 15 rotor blades 2 stator blades Additional 2 screens with hole diameters of 6/5 mm and 4 mm

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Gsdpfx Aoy Nlv Nekaekb Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Gkedpey D Sirjfx Akaob Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Gsdpfx Akjzuy Tdjaekb Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: used, Year of construction: 2017, Machine type Vertical CNC turning center Manufacturer EMAG GmbH & Co. KG Model VL 4 Year of manufacture 2017 Control system Fanuc 32i-B CNC Number of axes 3 (X, Z, Y-Axis) Tool turret 12 stations, including fixed and driven holders (BMT65) Max. chuck diameter 260 mm (10.2 inches) Max. workpiece diameter 200 mm (7.9 inches) Godpfeyyazbex Akaskb Max. workpiece length 200 mm (7.9 inches) X-axis 740 mm (29.1 inches) Z-axis 400 mm (15.7 inches) Y-axis ±30 mm (±1.18 inches) Rapid traverse X-axis 60 m/min Rapid traverse Y-axis 15 m/min Rapid traverse Z-axis 30 m/min Power (40% cycle) 25 kW (33.5 hp) Power (100% cycle) 18 kW (24 hp) Torque (40% duty cycle) 280 Nm Torque (100% duty cycle) 202 Nm Max. speed 4,500 rpm Machine weight Approx 10,000 kg Machine dimensions (L × W) Approx 6,000 mm × 3,600 mm

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Gsdpfxozg N Dij Akaokb Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0460013, We sell a Revent 4 doors proofer for 8 racks, model:PB06/1Xeb10, MFG 2009, excellent condition. The profer is dismantled properly and has a montage schema. Made in Sweden Voltage: 3 Ph 380-400 V + N+ PE 50 Hz; Total load 10,5-11,5 kW Heat capacity 10-11 kW Rated current 17-17,8 A Total weight dismantled with the stainless steel floor approx. 600 kg. Price Euro 3.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Gkodpfewh Unxex Akasb Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 7,800 kg, load capacity: 45,000 kg, ELME 817-21652 REACH STACKER CONTAINER SPREADER – UNUSED – YEAR 2025 Unused surplus ELME 817 telescopic top-lift container spreader, designed for handling laden ISO containers with a reach stacker. TECHNICAL SPECIFICATIONS Manufacturer: ELME Spreader AB, Sweden Type: 817-21652 Serial number: 29176 Year of manufacture: 2025 Lifting capacity: 45,000 kg Spreader weight: 7,800 kg Control voltage: 24 V Head configuration: Narrow head Gjdpezxc Edsfx Akaokb Application: Laden ISO-container handling Condition: Unused surplus This recent spreader originates from a surplus project and has not been put into operation. Minor cosmetic marks resulting from transport or storage may be present. Inspection is possible by appointment. Worldwide transport can be arranged. Price on request. Offered subject to prior sale, inspection and final technical verification. Sold in its present unused surplus condition, without commissioning or operational testing.

Condition: ready for operation (used), Veneer Lathe manufactured by Rau-te in Finland. Type 104" Dimension veneer sheets: Length 2.62 m. Minimum width 0.5 meter Infeed loading system included. There is also a complete out feed system included ofter the Veneer lathe Gsdpfjzy Ui Dex Akaokb with acceleration conveyor, veneer cutting knife and veneer stacker. A second veneer lathe Raute 66” is also available with in- and out feed system. Dimension veneer sheets: Length 1.00 m to 1.65 m. Minimum width 0.5 meter

Condition: ready for operation (used), Double butt end reducer manufactured by Bruks in Sweden. No need to turning logs before operating. Gedpfx Akozy E Dxjaokb Cuts away all root end flares with regard to the diameter of the log. Technical data: Log length: 3.2 m up to 7.5 m Max log diameter: 700 mm Max flare diameter: 980 mm Maximum removal: 200 mm radially capacity: up to 7 logs/min depending on diameter

Condition: used, Bark hog manufactured by HBS Suitable for bark, butt flares, breakage, off cuts and particle board, residues Capacity 25 to 40 m3 ready made product per hour. Electrical motor 36 kW Fraction size produced : 23 x 50 mm Infeed opening : 455 x 630 mm Gedpfx Akjzy Eu Dsaskb

Condition: ready for operation (used), Log intake with debarker. Below parts included: - Log deck with steep-feeder - In-feed conveyor - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker Gkodpszrdn Hjfx Akaob - Conveyor for bark

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X 650 Y 400 Z 420 U/V +/- 101mm, Table 901 x 660mm, max load on table 1,200kg. Gkodozzmkiopfx Akasb

Condition: good (used), Year of construction: 1999, functionality: fully functional, Table 3.000 x 1.000mm, X 2,700 Y 1,200 Z 1,500mm, Auto index head, Gksdpfxszzk T Us Akajb

Year of construction: 2008, condition: refurbished (used), JÖNI EASY 30 & 50 LIT ID.NO. 1160 2x cooking pots Jöni model easy 30 & 60 liter year mod 2008 electric tip easy to use and repair when needed. Gksdpfx Akof T R Akoaeb

Condition: excellent (used), functionality: fully functional, JEROS 5110 ID.NO. 2926 Gedpfsv Iz Aqex Akajkb Jeros type 5110 dishwasher in very good condition previously in a small meat shop. Electric heating completely in stainless steel. Dimensions 80 x 75 cm H 160 cm.

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Gjdpfxoifpz Ie Akaokb Year mod 1983. Dimensions 690 x 185 cm H 180 cm.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, KUIPERS FOOD PROCESSING ID.NO. 2824 Kuiper's reliable conveyor belt made entirely of stainless steel can also be adjusted to adjust the inclination of the belt. H in 115 cm H out 185 cm. Band width 49 cm Dimensions 186 x 80 cm Height 200 cm. Gkedpfsu Iw Umjx Akasb