Used Waterjet Sweden for sale (348)

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Max diam 750mm, Z axial travel 900mm, X Radial travel 380mm, table 630mm, CNC Siemens 802D in Z and X. Weight ca 14.000kg Fjdpszbt Iijfx Aatopl

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Fjdszcwupspfx Aatjpl Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, total length: 18,000 mm, load capacity: 60,000 kg, Very nice overhead crane. More pictures can be sent upon request. Located in Arvika, Sweden. Shipping is possible. Fpsdpfxezbx Ete Aatel

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Fpodpfx Aajy D Sirstel Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: excellent (used), functionality: fully functional, mileage: 5,580 km, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 7,300 kg, empty load weight: 6,600 kg, operation weight: 8,200 kg, number of seats: 2, Year of construction: 2012, operating hours: 5,580 h, Equipment: adjustable chassis, all wheel drive, differential lock, hydraulics, An authorized SUBARU dealer in Łaziska Górne presents a CATERPILLAR AP 300 paver. The machine has no accident history, comes from the first owner, and was used exclusively in Sweden. The AP300 is a small to medium-sized paver with a spreading width of 1.75 m to 4.0 m, making this model ideal for work on city streets, bike paths, sidewalks, shoulders, and other small to medium-sized areas. NOTE! We have two identical CAT 300 units available (see the last photos) - this orange one has only 2061 operating hours. The price is lower before refurbishment compared to the yellow one. A significant discount is available when purchasing two units. - Transport is possible within the European Union. ===•••===== A narrowing attachment allows spreading to a width of up to 700 mm (27 inches) for work in trenches and other narrow spaces. Technologically advanced options, such as eco mode, are available. Automatic filling, activation of the feeder system with a single touch, and an automated driving mode make the combination of this paver with the table an extremely efficient and versatile solution for small and medium-sized contractors. ====•••===== Machine type: Wheel-mounted asphalt paver Cat C3.3B engine Engine power 55 kW / 73.8 HP Operating weight 8000–8200 kg Transport weight 6600 kg Standard working width 1.75–3.42 m Maximum spreading width 4.0 m Minimum spreading width 700 mm Maximum output 406 t/h Max. travel speed 16 km/h Max. paving speed 61 m/min Wheelbase 1950 mm Transport and working dimensions Parameter Value Transport length 5029 mm Transport width 1938 mm Transport height 2645 mm Working length 5047 mm Working width 3180 mm Height with canopy 3415 mm Operating capacities System Capacity Fuel tank 110 l Engine oil 13.2 l Cooling system 9 l Flushing system tank 28 l Model features wheel drive providing good mobility on urban construction sites, ability to work in very narrow trenches (from 700 mm), automatic control of material feed, ECO mode to reduce fuel consumption, Fjdoy Szckopfx Aatjpl SE34 V or SE34 VT screed, good operator visibility and compact dimensions. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price :)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,800 mm, number of axes: 3, This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details. Fodpfx Aaszy Hqaotepl - Maximum Material Thickness: 100 mm (via adjustable Z-axis)- Operating Hours: 30,192 hours- Included Additional Equipment: Uhde HPS 4022 high-pressure pump, second worktable for continuous loading/cutting workflowHigh-Pressure Pump Specs (Uhde HPS 4022):- Pump Manufacturer: Uhde High Pressure Technologies GmbH (ThyssenKrupp)- Pump Model: HPS 4022- Design Discharge Capacity: 2.3 l/min- Design Pressure: 4000 bar- Plunger Diameter: 19 mm- Stroke Length: 182 mm- Motor Rated Output: 22 kW- Pump Weight: 1080 kg- Pump Operating Hours: 30,192 hours

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Complete Slicing & packing line from CFS & Variovac! CFS-Uni slicer whit check controller / Scale year of construction 2006 updated firmware whit touch display. Fodpfsxmh Rbsx Aatopl Variovac Multipower year of construction 2008 built in vacuum pump + booster pump foil wide 542 mm, Rejection 430 mm, MAP machine, ELS Labeling system! Very nice and well maintained line ready to work!

Year of construction: 1999, condition: excellent (used), functionality: fully functional, SFK-DANFOTECH MA 3000 SD ID.NO. 2683 Fsdpfx Ajrzq Dzeatspl SFK-Danfotech mod MA 3000 SD vacuum tumbler / massage tumbler year mod 1999 capacity 3000 liters. Dimensions 330 x 250 cm Height 250 cm.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, TIPPER TIE SAM3E ID.NO. 2826 Tipper Tie mod SAM3E double clipper year mod 1995 with revolver system for quick change of format tubes. Dimensions 210 x 115 cm Height 200 cm. Fjdpsu Iw R Iofx Aatspl

Condition: used, functionality: fully functional, Year of construction: 2017, For sale: CNC bending machine CIDAN FORMA 40 Multifold Condition: Used. Operating hours: 6568 hours. Manufacturer: CIDAN Machinery AB (Sweden) Model: CIDAN FORMA0 40 High-end CNC-controlled sheet metal bending machine designed for the precise and fast production of various shaped profiles. Technical specifications: Year of manufacture: 2017.11 Total weight: 5660 kg Control: CNC with PROLINK Operating hours: 6568 h Table height adjustment: from 0 to 36 mm Mechanical bend compensation adjustment (Crowning system) Working length: 4100 mm Max. bending thickness: 2.5 mm Equipment: Automatic rear support – flexible U-shape model (4.5 m x 1.2 m x 1.74 m) Swiveling upper beam – COMBI MULTIFOLD type Segmented tools for lower and bending beams with SBG 15 table CNC control with PROLINK graphical user interface (intuitive, easy programming) Quick change system for tools High accuracy and repeatability Application: This machine is designed for bending, forming and profiling sheet metal. Fpedpjy U I I Eofx Aatel Ideal for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Fpjdpfx Aexl Tnpeatsl

Condition: good (used), functionality: fully functional, Max. wheel diameter: 710 mm Gear width: 335 mm Table size: 630 mm Table bore: 120 mm Max. table load: 700 kg Max. module: 7 Min. module: 1 Hob spindle speed range: 40-315 rpm Feed range: Axial: 0.40 - 5 mm/rev Radial: 0.20 - 2.5 mm/rev Tangential: 0,1-1,25 mm/rev Fsdpfxezbt Hre Aatjpl

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: Fpedjwn El Uspfx Aatol A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.

Condition: used, Centering infeed conveyor Söderhamn 443. With log rotation, for logs and cants. Infeed conveyor Soderhamn 447, for logs and blocks Reducer Soderhamn 245 15" disc 3 spiral Fpedjy Th Upopfx Aatol

Condition: excellent (used), mileage: 4,88,084 km, power: 250 kW (339.91 HP), first registration: 09/2002, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 500 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, number of seats: 1, total length: 8,370 mm, total width: 2,540 mm, total height: 3,490 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2002, Equipment: differential lock, Superstructure Construction year: 2002 Fpsdpfx Aajy Ddpkotsl DAF 85-340 6x2 1st death: 25-09-2002 Km: 488,088 Manual transmission 14,500 liters of clean water Uraca High Pressure Pump Hydraulically driven water jet (Thick Hose) Thin water jet hose (Manual) ৱাটাৰজেট নলা পৰিষ্কাৰ কৰা تنظيف المجاري باستخدام نفاثات المياه Суу агымы менен канализацияны тазалоо Curățarea canalizării cu jet de apă limpeza de esgotos com jato de água Vízsugaras csatornatisztítás Veejoaga kanalisatsiooni puhastus Ūdens strūklas kanalizācijas tīrīšana Очистка канализации гидроструйной очисткой Pulizia delle fognature con getto d'acqua Wasserjetstrahl-Kanalreinigung Kanalizacijos valymas vandens srove Чистење на канализација со млазници Čišćenje kanalizacije vodenim mlazom = More information = General information Cab: single Registration number: BN-FN-04 Technical information Number of cylinders: 6 Engine capacity: 12.880 cc Drivetrain Make of engine: DAF Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Rear axle 2: Tyre size: 315/80 R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: air suspension Weights Empty weight: 13.080 kg Carrying capacity: 14.920 kg GVW: 28.000 kg Functional Make of bodywork: Koks Condition Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: good (used), functionality: fully functional, FOR SALE: Ursviken Optima 200 4.1/3.15 – High-Quality Swedish Press Brake Fsdpoy Rvc Njfx Aatopl Available for purchase is a heavy-duty and high-precision Ursviken Optima press brake. Ursviken machines are world-renowned for their robust design and long-term accuracy in demanding metal fabrication environments. Technical Specifications: Model: Optima 200 4.1/3.15 Year of Manufacture: 1995 Press Capacity: 2000 kN (200 Tons) Working Length: 4100 mm (Distance between uprights: 3150 mm) Max Working Pressure: 31.5 MPa Stop Time: 67 ms Safety Distance: 264 mm Machine Weight: approx. 13,700 kg Key Features: CE Certified: Meets European safety standards. High Capacity: 200-ton press force and a 4-meter bed enable heavy-duty bending of large workpieces. Swedish Engineering: Manufactured in Skellefteå, Sweden, ensuring exceptional durability and industrial reliability. Maintenance: Documented safety inspection history available. An ideal workhorse for any metalworking shop requiring professional-grade bending capabilities and dependable performance.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Vemag HP20E whit associated Vemag BC236 forming attachment. Complete line from 2017 and not used very much since new! Perfect for making Hamburgers, Meatballs, Chevachipi Etc. Fedpfx Aaexrnq Sjtopl

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 817-19241, Year of construction: 2019, load capacity: 45,000 kg, Unused Surplus ELME 817 Reach Stacker Container Spreader – 45,000 kg Unused surplus ELME telescopic top-lift container spreader, designed for handling laden ISO containers with a reach stacker. Technical details: Manufacturer: ELME Spreader AB, Sweden Type: 817-19241 Serial number: 21426 Year of manufacture: 2019 Lifting capacity: 45,000 kg Spreader weight: 9,300 kg Control voltage: 24 V Fpedozuxwzspfx Aatol Head configuration: Broad head Telescopic positions: 20 / 30 / 40 ft 30-ft stop: Yes CE marked The spreader is unused

Year of construction: 2025, operating hours: 250 h, condition: excellent (used), functionality: fully functional, *Rental Information* Work stoppage or a temporary challenge in your business? From industrial vacuum cleaners to vacuum loaders, rent short or long term — safe and simple. Need a flexible solution without the commitment of ownership? DISAB BagVAC™ is available to rent, giving you the same robust performance and mobility on a temporary basis — ideal for short-term projects, seasonal peaks, or while a permanent installation is being planned. Fpedezx N Skspfx Aatol DISAB BagVAC™ can easily be moved using a forklift or crane, making it useful in more places across your industry. It's often used as a standalone vacuum extractor with a directly connected hose, but is equally suited as a unit for fixed installation. Strong, reliable and user-friendly, DISAB BagVAC™ becomes a faithful servant in daily clean-up work – regardless of industry. DISAB BagVAC™ is optimal for temporary suction needs such as cleaning, collecting spilled material, or recycling various materials. Adjustable telescopic legs let you easily match the outlet height to your chosen big bag. The powerful suction unit handles particles from microscopic dust to waste up to 50 mm in diameter, with absorbed material collecting in the conical dust container and emptying automatically into the big bag or other container via the balance valve.

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting Fpsdpfx Aasy Au Hqotel • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Everything is in working condition, recently serviced and technically inspected. Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were sourced from Sweden. Fsdpfx Aasyghcrjtspl If interested, please contact me for further details, photos, pricing, or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Fedsx Sdw Ropfx Aatepl Infeed opening : 1514 x 695 mm

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Fsdezc Rc Tjpfx Aatopl

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Fpedpfeu Ivauox Aatsl Dimensions 260 x 160 cm Height 215 cm.

Condition: used, Year of construction: 2014, functionality: fully functional, Type: Manual Fed In-line folding, gluing and taping machine Fsdpjxnzn Nsfx Aatepl Manufacturer: Lamina system AB, Sweden Model: Gluer 2200GL Year: 2014 Max. format width: 2200 mm Min. format width: 70 mm Gluing unit: Nordson Production speed: 0 – 40 m/min, infinitely variable. Power: 5 kW 20 A Connection: 3x220 VAC PE 50/60 Hz Compressed air: 6 Bar Control console: PLC control with Touch Screen Machine size: W 2800 x L 2550 x H 1450 Weight: 950 kg Brochure find below