Used Weber Cr 8 for sale (104)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Psdjyhcabepfx Ag Tsgi Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min spindle taper: ISO: 50 Podpfx Aoxp Hgtog Tegi rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW weight of the machine ca.: 25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL *

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Pedpfxeq Tr Tbo Ag Tegi - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Year of construction: 1989, condition: good (used), Power trowel, concrete trowel, screed trowel -without a flat iron -Weight: 60 kg Pjdpsb A Hdfsfx Ag Togi

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Pedoi D Upkjpfx Ag Tsgi

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Further details on request. Pgodeya H Hcspfx Ag Toi Payment by cash or advance bank transfer. Sale to commercial buyers only, no warranty or guarantee.

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw Pedjgm Tqwepfx Ag Tsgi brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Control voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Other: – Including swivel mounting arm Pgjdpfx Asx Ek Tlsg Tei – Including extra connection box

Year of construction: 2005, condition: like new (used), WEBER MSG 460-5 ID.NO. 2553 Weber MSG 460-5 knife sharpener for sharpening round blades for slicers.. Dimensions 55 x 60 cm H 75 cm. Pgjdpfx Agjpcf Hie Tsi

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Podpfx Agoxf Up Uo Tjgi Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Pgsdpfx Aoif Rvajg Tei

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Pgodpfx Astpg Dnsg Tei Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Year of construction: 1991, operating hours: 1,02,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Podpfeqpft Iex Ag Tjgi - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER Pjdswaxuaspfx Ag Tsgi • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Condition: used, mileage: 1,001 km, power: 4 kW (5.44 HP), gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1999, Year of construction: 1999, driver cabin: other, Vehicle location: Bovenden, Hatz Diesel Engine E 673LS! Forward and reverse gear! Psdoxy Swxjpfx Ag Togi The exact year of manufacture and power output cannot be determined as there is no type plate present! Equipment details provided without guarantee; subject to change, prior sale, and errors!

Condition: used, mileage: 1,001 km, power: 2 kW (2.72 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 62 kg, first registration: 01/2018, Year of construction: 2018, driver cabin: other, Vehicle location: Bovenden. Honda GX R120 petrol engine! Accessory specifications provided without guarantee; subject to changes, prior sale, and errors reserved! Pedpfx Asxy Swrog Tjgi

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor Psdpowh Nu Tjfx Ag Tsgi 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Pgsdpfx Aew U A Dmsg Tsi Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SK144, Weber blade head, unused, new! Pgsdpfxswk H D Rj Ag Tji New price at Weber: approximately €18,000!!! Weber SK144 blade head, unused, new. New price at Weber: approximately €18,000!!!

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Pedehy Tp Dspfx Ag Togi Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Pjdjwzlqkjpfx Ag Tsgi

Condition: good (used), Year of construction: 2007, Weber ASB 560 Skinning Machine A machine like no other! A robust, high-performance machine for industrial use.  The Weber ASB 560 – premium quality – is a true industrial workhorse. The machine is equipped with a cleaning mode, allowing for thorough and effective cleaning. It's highly efficient, has a long lifespan, and is relatively easy to maintain. Manufacturer: Weber Model:ASB 560 Year:2007 Belt Widt:500 mm Power:50Hz / 400V / 1,1kW Machine Dimensions LxWxH:2.100x1.000x1.250 mm Pgjdpox Ap E Eofx Ag Toi Machine Weight:400 kg.

Condition: new, Year of construction: 2024, Facility managers and property managers know the problem: On the due date, i.e. when the garbage truck empties the garbage cans, all the garbage cans must be at the collection point. If the garbage cans are normally in the underground garage, the caretaker has to janitor has to take all the garbage cans up the ramp of the underground garage. up the ramp. This is time-consuming and exhausting or even impossible impossible. A 240 kg garbage can filled with waste paper can weigh over over 200 kg, a 1100 liter waste container even weighs over a ton. even over a ton. If this is the case, the janitor needs the help of a second person. This is cost-intensive. Weber offers time and health-saving solutions to this problem. problem. Talk to us about our waste garbage can frames for 1100 liter waste containers and our waste garbage can trolleys for 120 and 240 liter garbage cans. By the way, battery-powered towing vehicles are of course also available from us. gentle on health effective 400 kg payload galvanized Pgedpfxji Nnrue Ag Tsi can be coupled together Professional device - not for public road traffic Adapter: Ball head Trailer hitch

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Pgsdst Rcn Nopfx Ag Toi WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Pgjdehlvm Nepfx Ag Tji