Crushing and/or screening plant

Sonstige/Other Gasparin GI129CV Everest

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab Hodjpl Avdopfx Adwong - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: new, Year of construction: 2025, machine/vehicle number: 180965471, Additional options and accessories Notes Mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with closed circuit re-screening to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Hnsdpshd Naiofx Adweg Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Grizzly feeder 900 x 3400 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Specially designed recovery arm with lifting eye for recovery, towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Full hydraulic system.3.Paint HDRV (STANDARD) IMMEDIATELY AVAILABLE STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING EYE: black, U-TEXT RAL 9005 RECOVERY ARM: black, U-TEXT RAL 9005 REAR SUPPORTS: black, U-TEXT RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, U-TEXT RAL 9005, front smooth frame (STANDARD) - hot-dip galvanized - for mounting counterweight at the front - rear part in body color gearm (STANDARD) - lifting angle 40? (Fig. HDRV 1013) - Mounting plates for main and auxiliary cable winch - Shackle 2x15000kg - Left and right side in the rear part of the arm - Space for spare wheel holder on recovery arm.6.Lifting frame (STANDARD) - Range position with respect to horizontal axis -5° / +10° - Load capacity in retracted position 20000kg - Load capacity in extended position 10000 kg - Extension 3800mm - Range up to rear rafter supports (STANDARD) - Independently controlled - Maximum width -3000mm - Rotating supports for work on asphalt and rafter extendable beam No HDRV 1013 Single extension 0 - 3000mm Maximum payload 2000 - Storage of the tank behind the driver's cab - Relocation of the air tank behind Driver's cab - Battery relocation behind the driver's cab - AdBlue tank relocation - Counterweight behind the driver's cab on the front frame (weight 100kg) - Main cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on the right side (STANDARD) - On the right side, in rear connections for supplying the braking systems, transferred from the chassis - Quick release with 20 meter cable - Air pressure roller, on the left side of the body, above rear axles Electrical plug connection for trailer + trailer coupling, from the chassis Belt aid 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in Driver's cab - Camera above cable winches + LCD screen in control box SCREEN: ? Vibration resistance: 10G ? Impact resistance: 100G ? Working temperature: -30 to + 70 ° C Hedeiuwl Sjpfx Adwong ? CE marking ? EMC approval: activation of emergency stop switch - Radio remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in box opening - Doors - Railings on storage boxes - Stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the driver's cab, for fork, hook, open storage box edges with stainless steel profile in storage box lighting package complies with the road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED light warning bar GAMET DE LUX, 1800mm - Mounting of the light warning bar on the upper part of the body - Warning light ORANGE BLTZ, 2 pieces - front mounting - Warning light ORANGE BLTZ, 2 pieces - mounting on the rear - Warning light ORANGE BLTZ, 2 pieces - mounting on the edge of the last storage box door - switch for all spotlights on

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,000 h, machine/vehicle number: 42178149, Machine has connection to external power source. Can run on diesel or fully electrical. Very low costs per ton. Screenbox in feeder with adjustable screen. Hjdpow Rzlzsfx Adweng

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Hjdpeu R Rtbjfx Adwong Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant condition: NEW capacity: 120 m³/h Hedpfshd Na Usx Adwong mixer: Sicoma MAO mixer size: 3 m³ cement silos: 2x 55 to. guarantee: 1 year from startup more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: not inspected (used), Double knee jaw crusher Model: RB 1200/900 Feed opening: 1,200 x 900 mm Hnodpfxer Nvk Ie Adweg

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on crawler track VULCANO crusher is the most modern and compact machine of the last generation in the 25 tons category. The feed hopper with roadworthy loading dimensions and the possibility of folding the conveyor belt, which allows transport also on trailers, make it versatile in transports and equally fast in start-up. From the arrival at the site to the moment of the start of the crushing operations, only the time necessary for warming up elapses. Equipped with the latest generation of control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and incomparable performances both in operations on natural stone and in recycling, as well as for rentals. Production capacity: approx. 190 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. Hsdjhd I Sbopfx Adwjng Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 2750 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 830 x 580 mm crushing gap from 30 to 160 mm feed hopper 3,5 m³ - 1800 x 2970 mm grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width:2520 mm transport height 3100 mm Further information Purpose: construction, Drive: caterpillar

Condition: new, Year of construction: 2025, machine/vehicle number: 860828850, Gasparin GI1010CV K1 mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with re-screening with closed circuit recirculation to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm single deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Hodpfx Aehd I T Iodwsng Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Application: construction, Empty weight: kg, General condition: very good, Technical condition: very good, Visual condition: very good, Transport dimensions (L x W x H): 12.56x2.55x3.2,

Condition: new, Year of construction: 2025, machine/vehicle number: 732335740, Mobile jaw crusher on crawler track Diablo crusher is the most modern machine in the category with 30 tons. It is equipped with the latest control and operation systems of the latest generation, it is simple and user-friendly, and environmentally friendly to boot. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guarantees the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to to stresses and strains. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. Production capacity: approx. 220 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 3000 mm dust extraction system tank pump magnetic separator warranty 1 year to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1000 x 600 mm crushing gap from 40 to 170 mm Feed hopper 4m³ - 1820 x 3700 mm Grizzly feeder version 900 x 3300 mm Main conveyor belt 800 x 9600 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel Chain drive 400 x 2920 mm Weight: kg transport length 12500 mm Hnjdpfx Aohd I Sxsdweg Transport width:2530 mm Transport height 3150 mm Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,