Used Weed Harvester for sale (92)

Condition: new, This listing is for a Brand New Harvest Right Medium Home PRO Freeze Dryer sold through We are stock holders in UK A home freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included - Medium Freeze Dryer - Premier Industrial Vacuum Pump (Approx £1200 value) - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 5) - Guide to Freeze Drying - Mylar Bags (50 ct) - Oxygen Absorbers (50 ct) - Impulse Sealer Features - Tray space: 675 square inches - Freeze dry 4.5 to 5.8KG fresh food per batch - Freeze dry up to 1360KG fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) Dimensions - Freeze dryer exterior dimensions: 48.3cm wide x 63.5cm deep x 73.7cm height - Perfect for counter top, cart, or table. Weight of freeze dryer: 54KG Premier industrial vacuum pump included/no extra cost (Approx £1200 value) Power Standard UK 230v Shipping Info Nsdpfxexzg Uue Aihowk - The medium freeze dryer ships in one package with a total weight of 95KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA) - One freeze dryer in special size shipping pallet : 66cm x 91cm x 1114cmH - It is also possible to collect by prior arrangement Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty 1 Year international warranty provided by Harvest Right.

Condition: new, Year of construction: 2015, operating hours: 3,000 h, Operating hours: 3000. Water tank: 800 liters. Equipped with: 160 cm dispensing unit, lateral displacement 60 cm to the right, prepared for GPS integration. Optional: rear-view camera, 120 cm dispensing unit, 500 or 1,150-liter water tank, surface water pump (incl. hose and basket), high-capacity side nozzles, bracket for standpipe for hydrants, mounted on equipment carrier, e.g. Holder, Wille, Multihog, hand lance with 15 m water hose on the drum. Features: capacity per day: 17,000-35,000 m²/day*, operating speed at 100% weed coverage (min.): 0.5 km/h, average treatment speed: 3-5 km/h, operating speed at low weed coverage: min. 5 km/h, water consumption during weed control (min.): 34 l/min, drive via the hydraulic system of the carrier vehicle (min. 60 l/min at 180 bar), 2 x high-tech burners 110 kW with min. 92% efficiency according to EN 303-2, burner emission class: > EURO 6, automatic water softening system with 5 l canister and level monitoring, control unit with touchscreen for controlling and monitoring the system in the carrier vehicle, data storage for 5 days and daily performance readout via USB stick (Excel format), preparation for GPS integration, water pressure during weed control: 0.2 bar, water temperature at the plant during weed control: 98-99.6°C, active temperature control (software-controlled - no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C), burner drive: diesel or Aspen D biodiesel, capacity of the burner tank: 105 l, capacity of the water tank: 800 l, standpipe bracket, reversing camera, sensor-based dispensing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections, dispensing unit: working width 160 cm, lateral working nozzles (2 left, 2 right), plus 2 high-performance nozzles left and right, with 60 cm lateral displacement to the right, stainless steel hose reel with 15 meter hose and 20 cm hand lance, adapter and frame with support feet for mounting the unit on the carrier vehicle, water tank (plastic) 800 liters with C-pipe connection and level indicator, dry-run protection, water filter, standard color: RAL 9006, weight of the heating unit (net): 560 kg (without water and fuel), machine dimensions: (L x W x H) 3,500 x 1,750 x 1,600 mm, weight of the dispensing unit: 340 kg, storage location: null. Nwedpfx Aou Hf A Aeihsk

Condition: good (used), Tweedy / Baker Perkins mixer available for immediate sale, complete with stainless guarding system and feed tanks etc. In nice condition, we think it was rebuilt by Turkington at some point. Ideal for bread making operation or can also be used for making batter (for crumpets, pancakes etc) Various change parts are available from the manufacturer. Njdpfx Aeifz Ibjihjwk

Condition: used, Year of construction: 2023, color: other, KECKEX JESPI / WEEDEX-M13 Demonstration unit Vehicle structure: Set consisting of: - WEEDEX-M13 (hot water steam generator, 12 volts, 13 l/min, digital) - JESPI (JESPI L drive unit including battery and charger) - Forklift frame 2.0 x 0.7 m - Water tank 450 L, horizontal, traffic gray RAL 7042 (KOMEX-JESPI) - Set: AGM battery 12V, 260Ah with 25A charger, 2 pieces - Connector SB 50 gray Nwedpfxszhlumo Aihok - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion protection - Mounting bracket for surface treatment device KFBH-50 incl. bolt and chain - Hand-guided surface treatment device, 50 cm - Lance holder 4-way, straight, 2.0 - Hand lance set 2-piece, KHL-P (gun) with KHL-D (nozzle), KHL-Z - Cylinder lance and quick coupling L x W x H: 240 x 80 x 130 cm Dry weight: approx. 475 kg Maintenance and spare parts case WEEDEX-M13 Lance, spike L30 cm Lance, brass nozzle D8 cm Lance, fiber brush D8 cm

Condition: used, mileage: 59,373 km, power: 129 kW (175.39 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: air, number of seats: 3, loading space length: 4,290 mm, loading space width: 2,090 mm, loading space height: 2,160 mm, Year of construction: 2023, Equipment: Apple CarPlay, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, = Additional options and equipment = - Armrest - Remote-controlled central locking - Radio - Tachograph = Further information = General Information Number of doors: 2 Model year: 2026 Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Axle configuration Axle brand: Anders Front axle: Steered; Tire tread left: 30%; Tire tread right: 30% Rear axle: Twin tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: Air suspension Weights Unladen weight: 3,193 kg Payload: 2,007 kg Gross vehicle weight: 5,200 kg Njdsxxzayopfx Aihewk Cabin Interior: black Maintenance, history, and condition APK (Main technical inspection): valid until 03/2027 Number of keys: 2 (1 remote control) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2023, Warning signs with lighting Chassis / Njdpfx Aeuhpf Ieihjwk

Year of construction: 2005, condition: good (used), Storage silo for animal feed -Storage of grain maize -Gross capacity approx. 1811m³ -Gross capacity approx. (800 kg/m³) 1449 t -Silo diameter 9.39 m -Cylinder height 26.67 m -total height 28.56 m -Stainless steel roof -High silo made of steel with PERMAGLAS (glass-fused steel plates) -Roof with central hatch and additional roof inspection hatch -Pressure and vacuum valves, inspection hatch in the silo ring -climbing ladder, roof ladder Nwsdpop N Dvmefx Aihsk -Static requirements 1000 kg/m³, class II-B -Stored goods: Whole grain maize/CCM or wet grain in unground state Removal with Haake system (liquid grinding with stainless steel hammer mill, no moisture limitation)

Year of construction: 2020, condition: like new (used), KOAT tipper 3x Berg Benomic 4-S 21x Pepper Shuttle harvest trolley 63x Pepper Shuttle 4x Meto automatic spray trolley Njdjgrkq Iepfx Aihswk 3x sprayunit 1000L CONTACT: Bogaerts Greenhouse Logistics BVBA Mattijs Van Loon

Condition: used, Year of construction: 2017, operating hours: 1,915 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a deal is concluded, subject to errors, typos, and prior sale: Hako CityMaster 600 with new engine, sweeping unit with water and dirt tank with new engine, front-mounted mower, salt spreader, snowplow (Vehicle 267) First registration: December 14, 2017 10,236 km 1,915 brush operating hours 971 brush operating hours Engine new in 2025, currently 170 operating hours Engine 1,642 ccm 24 kW / 33 hp 25 km/h approval Permissible gross vehicle weight 2,200 kg Unladen weight 1,380 - 1,465 kg Overall length 3,160 - 3,260 mm x overall width 1,085 - 1,200 mm x overall height 1,9985 - 2,202 mm Road approval Articulated steering 2-brush system, adjustable Turbine + water pump on/off Water volume adjustable 3 speed settings for operation Radio/CD Rotating beacon, driver's side, rear 2 headlights at the top + 2 pairs in the middle Rear view camera with monitor, additional camera for monitoring the suction nozzle, automatic switching when reversing Radio with Bluetooth for mobile phone and MP3 Nwedpfx Aezwru Eeihek Repetition lighting, cabin roof Path sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal collection container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Hand suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roller carriage Vacuum indicator, container, to monitor suction performance and indicate reduced suction performance when the maximum container capacity is reached, as well as a blockage indicator Sweeping unit, 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with triple impact protection Disc brush, plastic-steel Light weed brush on the right Attachment, suction nozzle, roller carriage, sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport lock for road travel) Attachment, suction nozzle, mower Attachment, suction (transfer device for connecting the suction nozzle) Salt spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft and folding spreading plate, loading capacity 200 L, hand control for spreading rate and width, working width 1.5 - 4.0 m spreading plate, protection and discharge slide made of stainless steel. Filling sieve, foldable cover, additional protective cover for CityMaster 600. Quick-change base frame for CityMaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules Spreading control from the cabin, spreading rate, spreading width with automatic start/stop function Snowplow 135 cm, with automatic folding function, rubber edge strip Price: € 29,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of € 10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water Nedpfx Ajg A Rhkeihewk • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: used, functionality: fully functional, machine/vehicle number: 36518, mileage: 44,900 km, power: 175 kW (237.93 HP), first registration: 02/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary as some vehicles are currently in rental use! Additional similar vehicles available upon request. Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane assist, Active Brake Assist, hill start assist, underrun protection, reversing warning tone, daytime running lights, rain sensor, light sensor, plastic toolbox, tank capacity: 125 l, AdBlue 8l. Cab with 2 seats: driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, cruise control, digital tachograph, sun visor, reversing camera. Nwodpsy Rnk Sefx Aihok Hydraulically driven turbine, steplessly adjustable, tank made entirely of stainless steel, additional manual pump for lifting the container, weight display, operating hours counter, sweeping hours counter and water indicator (remaining volume 300 l), automatic water supply cut-off when lifting the sweeping units and when reverse gear is engaged, acoustic signal in the cab when container is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, left/right sweeper unit, dual-sided intake, dual sweeping system, sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brushes with steel bristles, diameter 700 mm, adjustable disc brush tilt (joystick right and left), roller brush with mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, disc brush spray nozzles, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in suction mouth, 5 nozzles on sweeping roller, wild weed brush type 'C' mounted on right, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grid, area approx. 2 m², pneumatic lifting/lowering with vibration mechanism, turbine wheel made from 8 mm Hardox 700, housing dome made from integrated Hardox AISI 316, filling via hose with check valve, Wilden water pump, P1, diaphragm pump, dry-run safe, leaf suction system at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, cable remote control.

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension Nedozcfzwepfx Aihewk * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Weed removal and surface cleaning ahead of maintenance Nedpfx Aijx U Ayvehewk • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) Nwodeyr Izxopfx Aihjk - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: used, Year of construction: 2022, KOMEX M13 500 Thermal Weed Removal Device Demonstration unit with 100 operating hours Compact and flexible KOMEX M13 500 – the compact and flexible thermal weed removal device. With forklift-compatible entry slots and its slim design, the unit offers countless applications for weed control, gum removal, and gentle cleaning. The mobile and easy-to-transport build is perfectly suited for any pick-up cargo bed or flatbed vehicle. Suitable for all carrier vehicles with cargo surfaces: • Pick-up trucks • Electric vehicles • Municipal vehicles • Tractors, forklifts, and more Standard equipment: - Hot water steam generator, 12 Volt, 13 l/min, digital - Forklift frame 1.30 x 0.96 m for KOMEX-M13-500 - Water tank 250 L, upright, Traffic Grey RAL 7042, front - Water tank 250 L, upright, Traffic Grey RAL 7042, rear - Battery compartment with cover for KSRA - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion guard - Kit: battery compartment, 260Ah battery, charger, 80A securing plate - 2-piece hand lance set, KHL-P (gun) with KHL-D (nozzles), KHL-Z cylinder lance and quick coupling - Dimensions (L x W x H): 131 x 96 x 122 cm - Unladen weight approx. 420 kg Njdpfx Aisyhtp Hjhowk Optional equipment: - Mounting bracket incl. pin and chain, coated in RAL 6018 GREEN - Walk-behind area device - 4-position lance holder, straight, 2.0 - Brass brush lance D8 cm, brass brush lance D8 cm with handle Location: Anton Hülsken

Condition: excellent (used), The machine is ready for operation; it was used for harvesting carrots. Its capacity is up to 25 tons per hour. Please check out my other listings. Nwjdpfx Aisytnhuehek

Condition: used, mileage: 68,015 km, power: 294 kW (399.73 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 07/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: 2033 ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7- color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 200 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles double-sided, 15m hose reel, 200 bar 106l/min, rear area observation, rear suction hose Nsdjt Hcfgspfx Aihowk

Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min Nwjdpfofn Tu Tox Aihjk ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Nwjdpfxefn Tvis Aihok Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic winch HAW4000 with electric valve for wheel loaders, excavators, cranes, mini-excavators, tractors in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many applications. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on logging cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They need to be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the steel rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us; we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm Nsdefn Tvkspfx Aihswk ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg Njdpfx Ajupiapeihswk - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg Nodpfx Aieuph Uxohswk included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm Nodpfx Aequ U Dnsihowk - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: used, Year of construction: 1991, Yeast management system comprising two harvest yeast tanks (GROSS, 1991), of cylindroconical design, each with two cooling zones. The tanks are fitted with various sensors and fittings. Other components: - two centrifugal pumps with stainless steel casings - aeration system for yeast and wort (Esau & Hueber ‘Turbo Air’) - flow meters and other sensors - pipe panel - various pipework and valves Nodpfx Aiszizf Rshewk Additional title: coolable, cylindroconical stainless steel tanks with pumps and yeast aeration Volume each: 4500 l Material: stainless steel Position: tanks standing on 3 feet each Base construction: cylindroconical tanks Features: 2 yeast tanks, each with 2 cooling zones (frame+ cone); 2 centrifugal pumps; yeast/wort aeration; sensors; pipe panel; various pipes, valves and sensors

Condition: used, mileage: 61,684 km, power: 308 kW (418.76 HP), first registration: 02/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Operating hours: 3841h, valid until 31.07.2026; Operating hours: 3733h, valid until 30.06.2026; Operating hours: 2650h. Equipped with ASR, BrakeMatic, synchronized horn, and a rear-view monitoring camera system with a 7" color display. Features two work lights at the front and rear, LED rotating beacon at the front and rear, and central lubrication system preparation. Also includes preparation for mounting attachments/weed brushes, a quick-change system, and a dual-engine variant with a JCB 93kW (Tier 4) engine. It has a double-sided sweeping material intake with a gross volume of 8 m³, a water system with approximately 2,150 liters, and a gas-sprung suction hose boom with a diameter of 200mm. It also includes a high-pressure washing system with 100 bar. Nwjdexpzthopfx Aihsk