Used Weeke Optimat Bhc 550 for sale (73)

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-15-0310, functionality: fully functional, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, number of slots in tool magazine: 9, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) Lodpfsxdw Tgsx Abcohd 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Lhodpfx Abswuz S Dscsd

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Lhodex Idw Aspfx Abcjd Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 4,300 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Travel range X-axis: 2,500 mm Travel range Y-axis: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed, milling unit 1: 24,000 rpm Spindle speed, milling unit 2: 24,000 rpm Spindle speed, milling unit 3: 24,000 rpm Ledpsxw Ugdefx Abcohd Number of controlled axes, milling unit 1: 4 Number of controlled axes, milling unit 2: 3 Number of controlled axes, milling unit 3: 3 MACHINE DETAILS Number of work zones: 2 Number of grippers: 9+4 Motor power, milling unit 1: 12 kW Motor power, milling unit 2: 12 kW Motor power, milling unit 3: 12 kW Tool magazine 1: 14 positions, located on the side of the machine Tool magazine 2: 14 positions, located on the side of the machine EQUIPMENT Grippers for holding the workpiece Automatic panel loading system Motorized transfer Automatic tool changer Printer for barcode labels CE marking Machine-mounted safety fences Note: Tools and the automatic chip extraction system are not included in the offer.

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84 Lodpfewuckhsx Abcohd

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Lhjdpfow Idb Hjx Abcod Total number of drilling spindles: 19

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Ljdsyv Ev Aspfx Abcshd Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. Lhjdpfeyu S I Iex Abcod In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Complete Production Ljdox D Dq Sjpfx Abcjhd

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Ljdpfx Absywafuecjhd Y axis working area: 850 mm Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Specification: Working length X: 3130mm Working width Y: 1250mm (1550mm from rear stops) Working height: 100mm Vertical 12 Spindle Drill Block 4 Horizontal drill in X Direction 2 Horizontal Drills in Y Direction Grooving Saw swivelling 90 degrees 9Kw Spindle with C-axis for aggregates 8 Position rotating tool changer at the rear 8 Position linear fixed tool changer Tool Pick Up Station Laser Pin Vacuum Pod Positioning Powertouch control system Energy Saving Mode CE Mark Lsdpfxeywu Uwo Abcshd

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, number of axes: 3, total height: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment Lsdpfxjyap S Ij Abcjhd • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D Lhedpfx Abelikvhecsd X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Max. panel length: 2500 mm Lhedpfx Abjyl Ihxecod No of injectors: 12

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Ljdpfxspl Hvde Abcjhd Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8 Lhjdpfxsx Idxtj Abcod

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Lsdpfjiwptuex Abcshd Max. panel length: 2500 mm No of injectors: 14 Positioning of Units by NC: yes

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14 Lhedpfxswcyacs Abced

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8 Ledpfx Abju N Skfscshd

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm No of Bottom Units: 3 Lodpfx Aeu Rv Uksbcshd

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Ledox A Tcujpfx Abcshd Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Lhedpfx Ajrwmwfjbcsd Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Lhjdpfx Abjwuz Dgscjd Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm Lhodpot Hmt Iefx Abcsd No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Ljdpfx Aowuclxsbcohd Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11