Used Weiler Commodor 75 for sale (180)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Pjdex Eb A Uopfx Aa Degg Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: good (used), WEILER MATADOR Lead and feed screw lathe from training workshop - Centre height: 140mm - Swing diameter over cross slide: 155mm - Distance between centres: 500mm - Spindle bore: 36mm Pgsdpfex Rql Ssx Aa Dsg - Speed range: 20–3500 rpm - Automatic longitudinal / cross feeds - Tailstock: MT 3 - Power requirement: 3 kW - Three-jaw chuck incl. reversible jaws - Collet setup incl. collets - Multifix tool post + holders - Electric chuck guard - Chip guard at rear - Emergency stop / off - Work lamp - Documentation Dimensions: LxWxH 1.6x0.7x1.6 metres / Weight 750kg Subject to errors and input mistakes

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Pgsdpfx Aok D S Rqoa Dog Control: WEILER Misc. accessories MARCELS MASCHINEN CH

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Pjdpfx Asmdn Dxsa Dogg

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ Pedpfx Aaegabvne Djgg spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 All parts are in very good condition.

Condition: used, total length: 1,500 mm, total width: 750 mm, total height: 1,350 mm, Empty weight: 700 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 300 - Carriage turning diameter [mm]: 160 Pgodox D Tlrjpfx Aa Deg - Distance between centres [mm]: 500 - Bed width [mm]: 210 - Spindle bore [mm]: 36 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 3550 - Transport dimensions: 1500mm x 750mm x 1350mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle Pedpfx Aaov D Ip Ns Degg - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Pgsdohy Tdyspfx Aa Djg Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device Podpfx Aaog R S Rce Dogg - Chip back wall - Operating instructions -used, as seen -

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Multifix Tailstock Accessories Podpfx Aasw Sn Iro Degg

Condition: good (used), Year of construction: 1996, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Lathe WEILER Praktikant 160 AC, year of manufacture 1996, serial number 4057. Swing over bed: 320 mm Distance between centers: 650 mm Swing over cross slide: 160 mm Spindle bore: 35 mm Speed: 48 – 2,500 rpm Pgsdpjx H Iddofx Aa Dog Power: 4 kW Dimensions: 500 x 1240 x 1550 mm Weight: 680 kg

Condition: excellent (used), Weiler Ergodor lathe Pedpeq Ixxyjfx Aa Dogg Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Podpfx Aaox Av Ruo Dsgg

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Podpfx Aaevgmbve Dogg Rotating center point

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Podsx Hz Rqopfx Aa Dsgg

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Pedpfex Hz N Hsx Aa Dsgg

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws Pgjdpfxoxv A I Te Aa Dog - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: refurbished (used), The lathe was completely overhauled in 2025: the bed and guides were reground, the machine was fully stripped of paint and powder-coated, everything was disassembled, cleaned, and rebuilt. Finally, the machine was measured and a protocol was created. Extensive accessories are included (13 pcs. Multifix, many replacement jaws, etc.). The original documentation with manual and maintenance reports is available! Psdpfx Aaox D Ayle Degg

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Pjdjn Ard Djpfx Aa Dogg

Condition: excellent (used), Swing over bed 330 mm Distance between centers 750 mm Spindle speeds 1-4'500 rpm Psdpfx Asud Naqea Dogg Control: WEILER C3 Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence Pgjdpfx Asu Aftgea Deg >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev Psdjvtp Edopfx Aa Dsgg >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg Pgedpfx Ajvkfhpea Dog >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Pgedpfxovivmyo Aa Dsg Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop Pjdpfoxcuazox Aa Dogg >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.