Used Weiler Mdu 260 for sale (202)

Year of construction: 1973, condition: excellent (used), turning length 125 mm weight of the machine ca. 0,4 t Itsdpfexpxqwox Aaben

Condition: good (used), used -- 6-fold changer for WEILER , type 260 Ijdpoxdixnjfx Aabstn

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders . Itodpfswrahxex Aabsn

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Iodpfx Aaohtnu Tjbstn

Condition: good (used), Year of construction: 1998,

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm Iedpfjvtthisx Aabjtn upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. Iodpfouxl Ezex Aabjtn For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: good (used), WEILER DA 260x1000 Center Lathe Digital Display - Three Axes "NEW" -Center Height 260mm -Turning Diameter Over Bed 535mm -Turning Diameter Over Cross Slide 345mm -Center Width 1000mm -Spindle Bore 71mm -Speed Range 33 - 1500 rpm -12 Spindle Speeds via Gearbox -Automatic Longitudinal / Cross Feeds -Threading / Metric / Inch / Diametrical -Tailstock MK 4 -NEW THREE-AXIS DIGITAL DISPLAY -Drive Power 7.5 kW -Face Spindle Nut "NEW" -Multifix Base Holder with Insert -Three-Jaw Chuck 350mm Isdpfewiztwex Aabotn -2 Emergency Stops -Electric Chuck Guard "NEW" -Chip removal panel -Coolant system -Drill chuck -Documentation Dimensions: LxWxH 2.7 x 1.5 x 1.7 meters / Weight 1700 kg Subject to errors and omissions

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders Ijdpfexn Rr Rsx Aabstn - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm turning speeds 25-5000 U/min centre distance 650 mm Isdpfxoxn Txaj Aabetn Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: used, Year of construction: 1997, - Drive system: Teach-in - Centre height [mm]: 210 Ijdpjwnh I Sofx Aabjtn - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1995, turning diameter over bed slide: 810 mm, swing diameter over cross slide: 510 mm, quill stroke: 225 mm, quill diameter: 115 mm, center height: 400 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, bed width: 480 mm, overall weight: 6,400 kg, torque: 3,150 Nm, We are offering you a lathe from the brand "VOEST ALPINE" (WEILER), model E80/3. For further details, please refer to the attached PDF. The extensive range of accessories is also listed there. Itsdpfxow Tq Tys Aabon Best regards, Wiegand Co.

Condition: used, functionality: fully functional, Conventional Lathe WEILER CONDOR VS2 Technical details Spindle bore: 38 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 200 mm Turning length: 750 mm Spindle speed (max.): 2,800 rpm Spindle speed (min.): 12 rpm Overall length: 1,700 mm Overall width: 650 mm Itsdpfsxmg S Rex Aabsn Overall height: 1,500 mm Total weight: 800 kg

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK Itodpfxjxndblo Aabsn quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Year of construction: 2009, operating hours: 9 h, condition: ready for operation (used), Additional Equipment Tailstock spindle diameter: 100mm / Tailstock spindle travel: 200mm / Internal taper of the tailstock spindle: Mk.5 Itedpfx Ajxlvc Asabjn This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, it's ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, functionality: fully functional, turning diameter over cross slide: 560 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, For sale: CNC lathe, brand Weiler, model DZ 65. The machine is equipped with 12 driven tool stations and is in excellent condition with low operating hours. Package including accessories available for a total price of €65,000. Technical data: Year of manufacture: 2014 Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Height of spindle center above floor: 1130 mm X travel: 207.5 mm Face length tip: 745 mm Z travel: 530 mm Turning diameter: 560 mm Rated power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Bar capacity in draw tube: 65 mm Tailstock NC controlled Center taper: MK 4 Power: 4 MK Torque: 9.5 Nm Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tool positions: 12 Tool shank cross-section: 20 x 20 mm Tool holder: VDI 30 Dimensions: 3180 mm x 2050 mm x 2200 mm Weight: 6300 kg Additional information: - Bar feeder hardware is pre-installed but requires activation - Supplied with chip tray only, chip conveyor available from Weiler - Equipped with oil skimmer - Offer does not include tool holders and collets, but these can be included upon request Transport and loading can be arranged at extra cost, Europe-wide. Prices are plus VAT. Inspection possible by appointment. Please contact us – our team is happy to support you. Ijdpfjuxc Tcex Aabetn Trade-ins or exchanges possible! Machinery purchase/sale BUY/SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2001, Lathe – cycle-controlled Itjdpsxl Ulpefx Aabon Manufacturer: WEILER Machine Model: E 35 Control: Siemens / Weiler D2 Year of manufacture: 2001 TECHNICAL DATA Distance between centers (mm): 950 Center height (mm): 200 Max. turning diameter over cross-slide (mm): 200 Max. turning diameter over bed (mm): 410 Spindle - Max. speed (rpm): 3,000 Tailstock - Internal taper: MT 4 Connected load (kW): 10 DIMENSIONS & WEIGHT Length x width x height approx. (mm): 2,300 x 1,400 x 1,700 Weight approx. (kg): 2,100 Specifications and data are subject to change and errors.

Condition: good (used), spindle bore: 66 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, quill stroke: 160 mm, quill diameter: 70 mm, center height: 280 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 2,500 rpm, total length: 2,850 mm, total width: 1,820 mm, total height: 1,750 mm, overall weight: 2,750 kg, torque: 1,600 Nm, We offer here a lathe from the brand "WEILER", model E50x1000. Iodpfx Aasw Trbfebstn Please refer to the attached PDF for details. The extensive accessories are also listed there. Kind regards, Wiegand Company

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 190 mm Isdpfsxmf Nnjx Aabetn Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Itjdpfxoxndbfj Aabon range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), spindle bore: 38 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 200 mm, turning length: 750 mm, total length: 1,700 mm, total width: 650 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 12 rpm, overall weight: 800 kg, Equipped with: Itedpfx Aaowxq Icobjn – Tailstock – Multifix tool holder – RÖHM 3-jaw chuck (Ø 160 mm)

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel Itodpfoxnda Usx Aaben - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts Isdpfexmak Hex Aabotn - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW Itsdpfx Asxmakyjabsn voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 2800 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button Ijdpfxjxmakto Aabetn - Operating instructions