Used Weiler Primus 2 for sale (201)

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Bdedpfx Aez R R Eiegkoi

Condition: good (used), Turning diameter 160 mm Turning length 500 mm Swing diameter over bed 400 mm Swing diameter over cross slide 220 mm Main spindle Main spindle bore 51 mm Spindle speed 5,000 rpm Bdodpfx Ajzwpl Iogkei Bar diameter 42 mm Chuck diameter 160 mm Number of tool positions 12 Tailstock quill stroke 50 mm Tailstock spindle taper MK3 Travel - x 250 mm Travel - z 550 mm Total power requirement 30 kW Machine weight approx. 4,000 kg

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate Bdodpfjz A Tgqjx Agkoi >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: used, functionality: fully functional, Mechanic's lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: approx. 150 mm Spindle speed range: 220 to 1,800 rpm Spindle bore: 28 mm Bdedpfx Ago Ahqlkekoi Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • 2 tool stations with Multifix holders • Drill chuck • Rotating center • Habel tailstock with collet chuck + set of collets • Various HSS tools All information is subject to change without notice. A demonstration under power is available at any time in our showroom.

Condition: used, functionality: fully functional, Mechanic’s lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Bsds Ahql Ijpfx Agkjdi Manufacturer: Weiler Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over carriage: approx. 150 mm Speed range: 110 to 3,600 rpm Spindle bore: 28 mm Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • Collet set • Drill chuck • 3-jaw chuck, 2 sets of soft jaws • Multifix holder • 2nd drawbar + set of collets • Following center • Various HSS tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA Bjdpszpwh Uofx Agkedi • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Bodpfx Agox Htf Hokodi Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: excellent (used), Year of construction: 1991, WEILER L + Z LATHE TYPE: PRIMUS GS MACHINE NO.: 4780 YEAR OF MANUFACTURE: 1991 Center distance: 430 mm Center height: 120 mm Equipment: - RÖHM 3-jaw chuck, Ø 125 mm, including jaws - RÖHM 4-jaw chuck, Ø 125 mm, including jaws - Set of collets, including draw tube, 23 pieces - HEIDENHAIN digital measuring system, transverse for feed - Fixed centering point, MK2 - Rotating centering point, MK2 - Longitudinal stop (2 pieces) - Follower plate, Ø 120 mm - Chuck guard - MULTIFX quick-change system, including 3 toolholders, size A - Various turning tools Bdsdpez Hwwzofx Agkoi - Operating tools - Color: green, RAL 6011 - Documentation

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G, machine number 2679, in excellent condition, with draw and lead screw. Includes 3 chuck jaws 125mm, tool holder, and 4x Multifix AD2090 tool holders. Bodpfx Agjz Eqn Dekedi Can be inspected and tested while powered on.

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display Bedpfxozr Rnyj Agkodi -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 Bdodpfx Ajvivmyogkji >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 Bdjdpfxezvy T Tj Agksi -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm Bdjdpfx Agjz N H Dqskji - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels Bdsdpfju Aftgjx Agkoi To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: Bdedpfxevtp Edj Agkoi >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Bedpfjn Ard Dex Agkodi

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts Bdedpfx Agjzbc Daekji The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws Bdodezn Rahjpfx Agkji -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Bodpfx Ajy I U Dysgkjdi Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm Bedpszbc Dtjfx Agkjdi turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Bdedpfxoz D Ut Io Agkei Level 2: from 320 - 1800 rpm Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h Bdodpfozzcfpox Agkoi - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock Bsdpoy Tmkvofx Agksdi >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm Bsdpfxoyyb T Sj Agksdi >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm Bdsdpfx Asyylqhogkji >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.