Used Weiler E 50 for sale (199)

Condition: good (used), Year of construction: 1989, 1 used lead screw and spindle lathe Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Technical data: Gjdezuthhepfx Akaekb Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm Gsdpfx Aksyyb T Soajkb >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev Gsdpfxsyylqhe Akaokb >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Godsyylq Ujpfx Akaskb Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Multifix A head Collets Godozz Hz Iopfx Akaekb

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC lathe Weiler DZ 26 The machine has only ever been operated with oil! Year of manufacture: 1996 Control system: Sinumerik Godpfoztl Haex Akaokb Equipped with driven tools and an FMB bar feeder. Further details to follow.

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders - 3-jaw chuck - Forkardt Godpfey A Ey Uex Akaokb - Machine lamp - Chip guard at rear - Bed stop - Machine feet - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2003, Main spindle X-axis: 200 mm Gkodpfx Akszwplheaeb Z-axis: 345 mm Spindle speed: 6,000 rpm Bar passage: 42 mm Total power: 22 kW Machine weight (approx.): 5,000 kg

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm Godpfxszy Sb Ds Akaekb spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by Heidenhain – Very Good Condition! Technical Data: >> Year of manufacture: 1991 | Machine No.: 3140 >> Centre height: 180 mm Gedpoylh Ncofx Akajkb >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short-taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake selectable >> Motor power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Includes and features: >> Heidenhain 3-axis digital readout >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good, fully operational condition. The machine comes from a state-operated workshop and has seen little use. The Commodor is one of the largest manual lathes manufactured by Weiler – a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request! Gsdpfxoypbypj Akaekb

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Gkedpsy T Hqcsfx Akaob Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders. Gkedpfx Akszg Hvvsasb

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: Gedpfx Akoymdymeaekb For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 Gkedpfozbiyhsx Akaob -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Gkjdpfx Akoxp Rvleajb

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Gsdpfx Aexp Ru Ujkaekb

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Technical data: Center distance approx. 500 mm Gkedpfx Akozga Npoaeb Center height above bed approx. 125 mm

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Gksdpfszq R Ecsx Akaob Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Gkjdpfx Akszu Tf Toaeb

Condition: used, Various supports for the WEILER 260. Gkodpfxozmxdxs Akasb

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Gkedpfx Asx Sqvgskaeb

Year of construction: 2010, condition: like new (used), We have the following accessories for the Weiler E30 lathe: 1. Faceplate, Schunk, 250mm, price: €600 Spindle head, DIN 55027, size 5 2. Faceplate, Röhm, 260mm, price per piece: €650 Spindle head, DIN 55027, size 5 Gsdpfsgabvnsx Akaokb 1. Traveling steady rest, price: €450 2. Follower flange, price per piece: €210 Spindle head, DIN 55027, size 5 All parts are in very good condition.

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology Gjdpfxjqwipnj Akaokb maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: good (used), Turning diameter 160 mm Turning length 500 mm Swing diameter over bed 400 mm Swing diameter over cross slide 220 mm Main spindle Gedpfxezwpl Ie Akajkb Main spindle bore 51 mm Spindle speed 5,000 rpm Bar diameter 42 mm Chuck diameter 160 mm Number of tool positions 12 Tailstock quill stroke 50 mm Tailstock spindle taper MK3 Travel - x 250 mm Travel - z 550 mm Total power requirement 30 kW Machine weight approx. 4,000 kg