Used Weinig Profimat 23 for sale (474)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 230 mm, working height: 120 mm, spindle speed (max.): 6,800 rpm, table length: 2,500 mm, TECHNICAL DETAILS Working width: 20-230 mm Working height: 8-120 mm Spindle speed: 6,800 rpm Feed speed: 5-24 m/min Table length: 2,500 mm MACHINE DETAILS Hnedpfow R T Uzex Aabou Spindle connection power: 11 kW Number of spindles: 6 EQUIPMENT ATS system with automatic 2-axis positioning for spindle 3 and 4 Mechanical brake for all motors Spindle can be used universally, 360° Note: The U-spindle is not included. A new one costs approximately €5,000.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Weinig Unimat 23 EL Four-Sided Planer (7 Heads) Year of Manufacture: 2005 Technical Condition: Very good Technical Specifications: - Working width: up to 230 mm - Working height: up to 140 mm Hjdpfxev Nvr Nj Aabenu - Number of spindles: 7 - Spindle arrangement: - Bottom horizontal - Right vertical - Left vertical - Top horizontal - Bottom horizontal - Top horizontal - Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: stepless adjustment, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW - Total installed power: 67 kW For an additional fee, installation, commissioning, and training on machine operation are available. We also offer ongoing maintenance services.

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Hnsdpfx Aaowyulusbsu Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 140mm Number of spindles 7 Arrangement of spindles Bottom 7.5kw Right 7.5kw Left 7.5kw Right 7.5kw Top 7.5kw Bottom 7.5kw Universal 360° 7,5kw ATS control system Corrugated table Pulling rollers in the work table driven Feed on cardan shafts Feed motor 5.5kw Feed speed 6-36m/min Hsdpfx Aerup Igeabenu Total power 61kw

Condition: excellent (used), working width 250mm working heigth 130mm 6 heads heads set: bottom/right/left/top/top/bottom toothened roll in the infeed table variable regulated feeder spindles diameter 40mm feeder with cardan Hsdsw Afbrepfx Aabjnu pneumatic pressure of feeding rolls two axes heads regulation

Condition: used, Protective hood / cover / flap for a planing machine Weinig type Unimat 23 SP or similar. length: 1.150 mm Hedpjwuub Ssfx Aabonu width: 1.550 mm height: 1.100 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, spindle diameter: 40 mm, working width: 230 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 36 m/min, planing width: 20 mm, height adjustment type: electric, planing height: 160 mm, working height: 8 mm, Equipment: cabin, motor brake, Weinig Unimat 23 E 6 Head planer moulder. Bottom head - 10hp Fence + near head -15hp (common motor) 1st top head - 15hp 2nd top head - 15hp 2nd bottom head - 10hp Spindle speed - 6000rpm Feed speed - min/5 + max/36 meters per minute Working width - min 20mm + max 230mm Working height - min 8 mm + max 160mm Spindle diameter - 40mm The machine is currently still in use and viewing is more than welcome. Hjdpfxev A Rpcj Aabonu

Year of construction: 1990, condition: excellent (used), Weinig Profimat 22 four-side planer - max planing width 23 cm - maximum planing height 13 cm - bottom, right and left by one motor, universal - stepless regulation of the feed speed - all spindles can be adjusted vertically and horizontally - 4 spiral heads Hnedpfx Aaehx Ncdebeu The machine is in very good condition.

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder Hodpfx Aajncc Igsbjnu only machine machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Arrangement of spindles Bottom 4kw Left Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic presses divided into 3 sections Feed speed adjustable by variator 5-24m/min Hnjdpfxou Hgd Ij Aabju CE certificate Technical documentation

Condition: excellent (used), Year of construction: 1998, working width 230mm working height 140mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls Hjdpew Afahofx Aabenu two axes heads regulation spindles speed 6000 RPM electric regulation of pressure beam feeder with cardan variable regulated feeder heavy silenced cabinet

Condition: used, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of wood with grooved bed, without soundproof cabin. * Spindles: 5 spindles: 5 spindle 1: Bottom / 7.5 kW spindle 2: Right / 7.5 kW * Spindle 1: Bottom / 7.5 kW spindle 3: Links / 11 kW spindle 4: Bottom / 11 kW spindle 5: Top / 15 kW Hedsrmvhfopfx Aabsnu * Spindle 2: Right / 7.5 kW working width: 230 mm working height: 160 mm spindle diameter: 50 mm * Spindle 3: Left / 11 kW * Spindle 4: Bottom / 11 kW * Spindle 5: Above / 15 kW * working width: 230 mm * working height: 160 mm * Spindle diameter: 50 mm

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Hedpfx Aajvbwzvebenu Left Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Condition: excellent (used), Year of construction: 1999, Four Side Planer Weinig Unimat 23 Technical Data: - Planing width: 230 mm - Planing height: 160 mm Spindle Configuration: 1. Bottom 2. Right 3. Left 4. Right 5. Left 6. Top Hsdpfxet Dc Iij Aabenu 7. Bottom 8. Top 9. Bottom 10. Universal

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed rate Z-axis: 36 m/min, planing height: 160 mm, spindle diameter: 50 mm, planing width: 230 mm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, planer shaft diameter: -250 mm, number of spindles: 6, Purchased directly from Weinig after a complete overhaul. Hnsdewcdt Tspfx Aabou Garage maintained. The Fase unit is completely new.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Hodovtpk Hjpfx Aabsnu head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: excellent (used), spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles Hnsdpfxop N Ehfs Aabeu spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table ATS fast locking spindle system

Condition: used, Hydro-fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to sanding (e.g. in window construction) with high-performance spindles. * Very good original condition spindles: 2 Spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) working width: 230 mm working height: 120 mm Hsdpfxot Rmbmj Aabenu Spindle ø: 50 mm feed: 3 kW // max. 36 m/min Spindle speed: 7,200 rpm Jointers: Yes jointer: Yes Counter bearing: Yes Short parts package: Yes

Condition: used, Year of construction: 2003, High performance planer Weinig type Hydromat 23 Planing and moulding machine Weinig Hydromat 23 for four-sided planing and moulding of wood with feed rate up to 100 m/min. Original data of the machine, technical modifications reserved. - spindles: 8 - Spindle arrangement: 1. bottom 18,5 kW // 6.000 rpm // flight circle 125 - 180 mm // counter bearing 2. right 22 kW // 6.000 rpm // flight circle 112 - 250 mm 3. left (22 kW) // 6.000 rpm // flight circle 112 - 250 mm 4. top (22 kW) + chamfering unit // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 5. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 6. top (22 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 7. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 8. universal (11 kW) // 6.000 rpm // flight circle 112 - 200 mm - Spindle diameter: 50 mm - Working width: 20 - 230 mm - Working height: 12 - 160 mm - Feed 22 kW // approx.: 8 - 100 m/min - Year of manufacture: 2003 - ATS system - Drive for horizontal spindles via toothed belts - 5 driven rollers in the table - Air cushion system in the machine table - Short infeed table with driven 4 rollers Hsdpfx Aasup Av Debonu - 400 V // 50 Hz

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 Hjdpfxjwvqkle Aabjnu WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1987, Four-side planer Manufacturer: Weinig Model: Profimat 22 N Year of manufacture: 1987 Planing height: 220 mm Planing width: 120 mm Number of spindles: 4 Feed speed: 5 – 22 m/min, infinitely variable Total power: approx. 17 kW Spindle speed: 6,000 rpm - First spindle: bottom, 4 kW, tool diameter: 125 mm Hnsdpfx Asww A T Ujabsu - Second spindle: right, 5.5 kW, tool diameter: 180 mm - Third spindle: left, 5.5 kW, tool diameter: 190 mm - Fourth spindle: top, 4 kW, tool diameter: 200 mm

Condition: used, Year of construction: 1987, with reversible knives - structure reversible plate headsused, good conditionmake Weinigtype Profimat P22Myear of construction 1987machine . 2261149Number of spindles 4Spindle arrangement u-re-li-oMotors kW 4 - 5.5 -5.5Planing width approx. 220 mmPlaning height approx. 120 mmSpindle diameter 40 mmTable length approx. 2000 mmKnife system - indexable inserts - build-on headsFeed cutterCardan feedProtective coverTable lubrication lubricant pumpInfeed before planerFeed speed infinitely variable 5-22 m/min.2.2 kWprofilingslide rollers 1 piece drivenelectric adjustment thicknessing shaftdigital displayssuction connection 120 / 120 / 120 /140 mmspace requirement approx. 3300 mm x 1750 mmweight approx. 1300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition, as inspected,without guarantee and warranty Hnjdpjvwfptjfx Aabju

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM Hsdpfx Aaepkwaxobonu electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), working width 230mm working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) Hnedpfx Aajqmmfujbju manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: ready for operation (used), Working width: 220 mm Hnodev Dh Sdjpfx Aabsu Working height: 120 mm 5 spindles Spindle arrangement: bottom / right / left / top / right Motors: 5.5 kW, 7.5 kW, 5.5 kW, 5.5 kW Table lubrication Feed speed: 6/22 m/min Year of manufacture: 1990 Machine length: 4400 mm Width: 1700 mm Height: 1250 mm