Used Weinig Unicontrol 12 for sale (545)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 3,00,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" Todpozwu Hwsfx Abtjb • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Power Com controller Tjdpfszxx Diox Abtsb variable regulated feeder 5-30m/min

Condition: excellent (used), Weinig Unimat 500 four-sided planer max. planing width: 230 mm max. planing height: 120 mm 6 heads Spindle 1 - 7.5 kW Spindle 2-3 - 11 kW Spindle 4 - 11 kW Spindle 5 - 11 kW Spindle 6 - 7.5 kW Memory system control 40 mm spindles Feed controlled by an inverter Todpfxozxyvaj Abtsb Robust planer from WEINIG, machine inspected, well-maintained, in very good condition Machine dimensions: length 450 cm, width 200 cm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: V001175, Weinig GRECON TURBO S finger jointing line with integrated Timme stacking machine - German production - year of manufacture 2015 TECHNICAL PARAMETERS: Wood parameters - width 40 - 150 mm - thickness 20 - 80 mm - length 150 - 1000 mm - pressing length 3000 - 6100 mm - power consumption 145 kW - air consumption 4300 Nl/min - suction capacity 12088 m3/h - two milling stations - undercutters - package width 600 mm Folded machine dimensions - length 30000 mm - width 7000mm - height 2100 mm Todpfx Ajyrccdjbteb - required floor length: approx. 31000 mm - required width: approx. 8000 mm

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm Tedezryupopfx Abtsb - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors - Control system: OptiCom Pro

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization Tedpfx Absgz Tbdotob total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Condition: excellent (used), functionality: fully functional, working width 230mm working height 140mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric regulation of pressure beam feeder with cardan variable regulated feeder Todpfozxxy Rex Abtjb heavy silenced cabinet

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119291, planing height: 160 mm, planing width: 260 mm, We are offering this well-maintained Weinig Powermat 600 planing and rabbeting machine, manufactured in 2014. Manufacturer: Weinig Model: Powermat 600 Year of manufacture: 2014 Condition: good Machine type: Planing and rabbeting machine Tedpfezltp Tjx Abtjb Zuani/Kanefusa tools for molding, window and door frame production (original price EUR 18,000) are included. If you have any questions or require further information, please send us a message or call us.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. control MemoryPlus Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Todpfx Abjvnwbcetjb Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infin...

Condition: excellent (used), functionality: fully functional, Working width 220 mm Tedpezxyvmsfx Abteb Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Table length 198 cm Table lubrication Stepless feed speed adjustment Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: used, Year of construction: 2009, total width: 1,500 mm, total height: 2,300 mm, Colour: Grey Empty weight: 3.200 kg Dimensions (LxBxH): 420 x 150 x 230 cm Fourside moulder Weinig Variomat Year of construction 2009 Serial number: 113680 400v, 32kW 64Amp. Min-max working width 20-230mm Min-max working height 8-120mm Max tool diameter vertical spindle 232mm Max tool horizontal spindle (Not on the first) 200mm Input table length 1950mmFeed speed 6-12 m/min Spindle diameter 40mmSpindle speed 6000 U/min 1st spindle, bottom: 5.5kW 2nd & 3rd spindle, left & right: 7.5kW 4th spindle, top: 11kW 5th spindle bottom: 5.5kW Tjdpfx Abswnhh Eetsb Please note: 5th spindle does not work Dimensions: 4000x1400xH1350mm weight 2500kg - Details: - └ Description: Problem with 5th-spindle - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 113680 - Transport dimensions: 4200mm x 1500mm x 2300mm (l x w x h) - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, New decorative film (manufactured in 2019) Control panel 23 001 0078 Ident No. 10017781 / 912053002 Used original circuit board, cleaned and tested Used original aluminium support plate Tedpfxjzrxnhj Abteb Cables available on request

Condition: excellent (used), functionality: fully functional, planing height: 230 mm, spindle diameter: 40 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 170 mm, workpiece width (max.): 230 mm, number of spindles: 6, Equipment: motor brake, SCM SUPERSET CLASSIC 230 Tedpfx Abozw Umwstsb 6 spindles Spindle diameter: 40 mm Spindle arrangement: 1 - Bottom (7.5 kW) 6,000 RPM 2 - Right (7.5 kW) 6,000 RPM 3 - Left (7.5 kW) 6,000 RPM 4 - Top (7.5 kW) 6,000 RPM 5 - Top (7.5 kW) 6,000 RPM 6 - Bottom (7.5 kW) 6,000 RPM Feed rate: 5.5 kW / 6 - 36 m/min One driven roller in the table at the outfeed.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat (Hydromat) 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Todpozwfwtsfx Abtjb Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Tsdpfx Abjzv S Atotob Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER Tsdpfx Aezv S H Sobtob OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), working width 230mm working height 120mm Tedozxx D Nopfx Abteb 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991 Tsdpfeyi Afmox Abtsb

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment Tedpfx Abszu Awrotjb – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL Todjypvdijpfx Abtjb With side pusher and waste gate 5. Outfeed transport belt

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) Todpfjw Ebacex Abteb (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). Todpfx Abeytd S Nsteb OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: used, Year of construction: 2008, WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Todpfx Abszvpw Ijtob Tool length 0 - 240 mm Radial measuring range (radius) 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H), with display on electronic digital displays. Electronic digital displays providing information on tool radius and height. HSK63 tool holder for PowerLock tools. NEW: PowerLock adapter HSK63, shank D=50 x 260 mm.

Condition: used, Year of construction: 2007, machine/vehicle number: MR007003, For sale: A very complete Weinig Powermat 500 (year of construction 2007). Thanks to the increased planing capacity (300x160mm) and extensive mechanization, this is the ideal production line for professional woodworkers, carpentry workshops, or timber frame construction companies. Installation can be arranged upon consultation. Key specifications: - Large capacity: Maximum processing size of no less than 300 x 160 mm (ideal for heavy timber, joists, and wide parts). - Spindle arrangement (5 axes): Bottom (11 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (11 kW) – Bottom (7.5 kW). - Including oscillating axis: Equipped with a moving spindle with an input measuring system. Enables efficient processing of boards with varying/tapering widths with minimal wood loss. Tedpozwv Eusfx Abtsb - Combined spindle mounting: Equipped with a PowerLock quick-change system on both bottom spindles and the top spindle. Conventional mounting ø 40 mm side spindles. - PowerCom Control: Graphic touchscreen for quick profile changes and digital management of tool settings. - 1-Man Operation: Including automatic return system. - Including accessories: Supplied with straight planing heads (bottom jointing cutters) and an extra horizontal PowerLock axis. Machine manuals are available. Technical specifications: - Number of planing axes: 5 - Order of planing axes: B-R-L-B-B - Maximum planing width: 300 mm - Maximum planing height: 160 mm - Feed rate: 5-30 /min - Serial number: 109200

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg Tedpfxsynl N Se Abtjb